680i SLI is too expensive? Asus as the solution : P5N32-E SLI PLUS

[Jultsu]

Well, actually, it's not that simple I discovered that the VTT voltage is dependent on the NB voltage When I'm giving 1.65v to the NB, the VTT voltage needs to be exactly 1.35 (from bios) to NOT freeze (it's still not stable though). 1.85v NB requires 1.45v VTT. 1.60v NB required 1.30v VTT from bios.

This is just insane! How am I ever going to get this stable ?

[Don_Dan]

Well, actually, it's not that simple

I was afraid you would say that...

Thanks for the information!

[pifive]

Hello guys ... I have been following this thread for some time already.. pretty much from last year when I decided to build a new rig. In December I finalized my build and everything worked fine .. right until yesterday when I decided to put less TIM on the HSF so that means reseat the heat sink fan. I took the HSF out and other components but the CPU.. when I put back everything in place and turn on nothing.. no beep no screen nothing.. all components are on since I can see the light on mobo green and all fans on.. the GPU fan is at full speed and my memory leds ..are only on but the blue ones (using tracers) in any case the computer do not POST at all no matter what I do.. I have tried taking off GPU.. Memory.. 1 GB slot .. changing memory slot .. clear CMOS.. battery removed all that and nothing.. I even tried with CPU and HSF only and nothing. SO i wonder if you guys have any ideas of what could have been. I put it out and re builded once again and nothing.. I used anti static wrist strap .. Any help would be appreciated.

here are my pc specs :

Q6600 G0
Evga 8800GT
P5N32-E SLI plus
PCP&C 750 Silencer
Crucial Ballistix Tracers PC2-8500
Seagate Barracuda 7200.10
1 DVD RW SONY Optiarc 7170A
Cooler Master HyperTX2 HSF

Thanks all