2008 XS Cheapazchips 3D challenge

[oohms]

Gigabyte 8400GS voltmods:

Vgpu:


Vmem:


More Vmem:


OCP mod: (Good for 2.3v+, but mosfets get HOT)

[Achill3uS]

I've got today my second 8400GS, it's a Zotac non-low profile edition



can't wait to get home and try it the pwm area looks powerful, and has 256mb of hynix 2.5ns memory, i only need to figure out the vmods

[zakelwe]

Stock runs done tonight

2001

http://service.futuremark.com/compare?2k1=9328295

details

http://www.zen141854.zen.co.uk/stock2001.jpg

03

http://service.futuremark.com/compare?2k3=5714866

details

http://www.zen141854.zen.co.uk/stock03.jpg

Regards

Andy

[dinos22]

hey oohms good on ya for posting those mods

[Deanzo]

Gigabyte 8400GS voltmods:

Vgpu:

Hey mate,

I take it the wire to the right of the 20k VR is the ground, is there another ground near that, that could all so be use.
For the life of me I can't get the wire to solder to it, the wire to pin 4 was just fine though

Edit: Don't worry, got it.

Edit 2: The board wont run over 1.35vgpu

And I just ran 03 at 711/540 = 9239, and this is what the beta ORB just told me.

Upload failed with errorcode: -20

Error message: Your registration key has already been activated with another ORB account. This can occur if you have multiple ORB accounts, or multiple users attempt to use the same key. The ORB only allows one key to be associated with one account

As if!!

[oohms]

Hey mate,

I take it the wire to the right of the 20k VR is the ground, is there another ground near that, that could all so be use.
For the life of me I can't get the wire to solder to it, the wire to pin 4 was just fine though

Edit: Don't worry, got it.

Edit 2: The board wont run over 1.35vgpu

Thats wierd, mine ran fine at 1.7 vgpu

I'll post up an OCP mod soon soon, maybe that will help

[Deanzo]

Thats wierd, mine ran fine at 1.7 vgpu

I'll post up an OCP mod soon soon, maybe that will help

Thanks mate