Official GIGA P35-S3/DS3/DS3R/DS3P/DS4/DQ6 bios/info thread

[Mtex64]

My super PI 1M is 11.266 sec with 4.2 GHz
[/url]

and this is my super PI at 4.5ghz, I dont know where is the problem.
E6750 on default has a better time : 19s

[hlonipha]

and this is my super PI at 4.5ghz, I dont know where is the problem.
E6750 on default has a better time : 19s

Make sure that you have all the power saving options in bios disable. I could be that maybe your cpu is throttling.

[Mtex64]

Make sure that you have all the power saving options in bios disable. I could be that maybe your cpu is throttling.

Yea, I have disabled all power saving options (TM2, C1E, EIST) and no execute too.

I could be that maybe your cpu is throttling.

I´ve thought that too, but RM clock didn´t confirm throotling.

Do you know some other tool, which can detect cpu throotling?
Both, Intel TAT and throotle watch don´t work.

[over_clocker]

Oh, and one more question about P35-DS3.. what's the most stable bios? I now have F12..

[Retro]

Oh, and one more question about P35-DS3.. what's the most stable bios? I now have F12..

Latest bios listed is F11, where do you get this F12 bios

[nightrider72]

Latest bios listed is F11, where do you get this F12 bios

His board is a DS3, not a DS3R...

[darb 2k]

Yea I tried F7-F11

F9,10 have memory address issues, but my voltage issue was still there

Also F8 has a PWM cpu fan issue.

I highly doubt this issue was bios related with the numerous versions I tried, and others really havent had this issue.

[Retro]

His board is a DS3, not a DS3R...

Thanks!
I should have guessed that, checked the Gigabyte site, sure enough, the DS3 (non-R) has the F12 bios listed. Strangely, my previous mobo was a 965P-DS3, and I was using the F12 bios for that board

[hlonipha]

Yea, I have disabled all power saving options (TM2, C1E, EIST) and no execute too.



I´ve thought that too, but RM clock didn´t confirm throotling.

Do you know some other tool, which can detect cpu throotling?
Both, Intel TAT and throotle watch don´t work.

Ok do this, bring your cpu speeds to 3.7ghz with lower volts and run spi. what is your score? If it is higher than at over 4ghz then it is throttling

[Mtex64]

Ok do this, bring your cpu speeds to 3.7ghz with lower volts and run spi. what is your score? If it is higher than at over 4ghz then it is throttling

ok, I´ve tried that ... time is .. 28s

at 3Ghz 1,225V 34s

[hlonipha]

ok, I´ve tried that ... time is .. 28s

at 3Ghz 1,225V 34s

My next step would be to switch the cpu to another one to rule out the motherboard. If problem percist then you know it is not the cpu. Now you have the motherboard or the memory to test.

[Mtex64]

My next step would be to switch the cpu to another one to rule out the motherboard. If problem percist then you know it is not the cpu. Now you have the motherboard or the memory to test.

I´ve tried the cpu on Gigabyte P35c-Ds3r, the detection wasn´t good at 100% (comp boot at 6x333), but after I had disabled the c1e, tm2, EIST the cpu ran at 3ghz with good performance on this cheap motheboard.
for example ... superpi 1M = 15s

Also the cpu is good, and the motherboard p35-dq6 is good too...because I´ve tried E6750 in DQ6 a there was no problem ...