BIOSTAR TA770 A2+ AM2+/AM2 AMD 770 ATX at the Egg

[tictac]

gotvoltage.. can you run 2.6ghz ht link stable with this board?

[gOtVoltage]

So far i can with stock settings 125.BST 1066mhz

The newest Mod NB 2600mhz and HT 2400mhz and 1066mhz memory...

Will run some prime after one more Bios...

Ive done countless Back to back runs with 3Dmark06 and Tons of SuPi runs with out any problems...Ive just been putting it off because im swapping Bios every 10minutes A working NPT Fid Bios will be Icing on the Cake..Seeing running the 9600BE the NPT is borked. Polygon is on a Bios roll Today

Update New Mod Bios XXX Priming @2600mhz NB and 2400mhz HT with 1066mhz memory setting,,pretty dang smooth even while playing music and Surfing Forums!

Just need to get the Width IN/OUT set to 16x and a Working NPT Fid with this Bios,, then the real fun will start

[gOtVoltage]

Here is a small update on TA770//9600BE @ stock Settings. GTS512 stock settings.

Default Bios 125.BST was used..

So far

Deafault@ 2300mhz and HT Auto settings Bios.

3Dmark06 = 6200+



HTlink/Width 16x and HT set to 2.6.

3Dmark06 = 9000+


HTlink/Width 16x and HT set to 2.6,,AOD Disable TLB/RED Option Button

3Dmark06 = 10800+


Progress ,, Testing new Mod TS6 for results..So far Link width or Pci-E still limits to 6200+ in 3Dmark06..Regardless of running 2.4ghz or 2.5ghz..New Modbios tweaks are helping to Oc higher but keep the Pci-E limited some how..will know more later..

The Goal now is to improve the ModBios over the 125.BST ,while Overclocking!..Eventually the ModBios will be able to get 2.5ghz or more..with out the wierd Pci-E//Ht problem...Then we should get 13000+ or better with a stock GTS512!