Water Cooled Case Gallery

[smee]

Rock!

Very nice rig there m8!

btw, can you do that rubiks cube there in the second pic?
I can do the cube in 43 seconds (or at least, that's my best time )

Also, what's your mixture of coolant? It looks sweet!

[taylormsj]

Rock, that is the nicest green liquid ive seen

Here is mine with new side panel




Comments?

[RockfordFosgate]

Rock i like your case good job

[smee]

Rock, that is the nicest green liquid ive seen

Here is mine with new side panel




Comments?

Very very nice window taylor!
I love the new windows!!

BTW, is that petra's rubber edging?

[taylormsj]

Thanks smee, it was well worth the elbow grease and flying drmele disc dangers.

And no, not petras, i got it form chilled pc, only 58 p from chilled pc per meter

[_Rock_]

Thanks a lot guys.

@ Smee - The cube doesn't belong to me, the mod wasn't done at my house. Anyway, I hate does cubes, they always seem to make me more nervous. :P

The green liquid is an "all-in-one" solution, by this I mean it is not necessary to add any other chemicals, like Feser-one. This one, however, is called LICS Vision-Fluid, can be also found as "Klax Destilliertes Wasser" if I'm not mistaken. . Nevertheless, I think Feser-one Acid Green UV might do the job as well.

Once again, thank you for the warm welcome.

Cumps,

_Rock_

[smee]

Thanks smee, it was well worth the elbow grease and flying drmele disc dangers.

And no, not petras, i got it form chilled pc, only 58 p from chilled pc per meter

Lol flying dremel disc dangers!!!
I hear ya, thats what happened when I cut out my window too

Could you give me a link to the edging?

[taylormsj]

here you go

http://www.chilledpc.co.uk/shop/prod...roducts_id=242

[Tw1st3d]

Here is my 2 x BIP + 1 magicool radiator in my P182

The pictures suck - since i only got my phone atm - will get better picture soon..

The case i not fully done, still waiting for my psu and hdd..

Hope you like it



Btw the water isnt that toxic green irl - looks weird on the picture

[rafwlkp]

Tw1st3d what pump is it? And why u use 2 three-way adapter?

[Tw1st3d]

Tw1st3d what pump is it? And why u use 2 three-way adapter?

It's a wasted XSPC XSO 400 - need a new on

I go two T's, one for filling and one for draining - want it easy

[CCC]

Figured i would post a couple of pics of the new rig. i havent finished cleaning up the wiring yet nor have i finished with the lighting but i figured yall might want to take a look

done benching for now cause i want to play some games but finished up at qx9650@4455mhz(405*11), maximus formula, 8800gts(g92) (850/2067/2200)-vgpu 1.35v -- WinXP

'06 -- 18560

EK Supreme on QX9650
EK fullcover on 8800gts (g92)
EK NB block
EK Asus 3a 2 x mosfet blocks
loop 1 --> cpu & nb -- 120.3 rad
loop 2 --> vc and both mosfets -- swifty MCR220 rad
Dual bay res with 4 barbs so both loops in 1 res

[smee]

Very very nice CCC!!

The loops are well routed

[joecop120]

As i scrolled over those pics CCC, my speakers went, "Bling bling bling"

[XxTechxX]

dangerden TDX
BIXII x 2 medium uv yates
masterkleer 7/16" tubing
T-line
dangerden pump
dangerden typee x1950 water block
fluid xp.

im new to this forum =].

[Mindless-Moron]

My watercooling

The rad and the fishtank, you can also see steve the inflateable pumpkin















The pump sitting on a sheet of folded bubble wrap

[De5tr0yer]

that's my ex MBO, p4c800 had a mobile pent on it, watercooled...
what's the rest of the config?

[taowulf]

Mindless, your rig is completely ghetto.

[ownage]

XFX 8400GS on D-tek Fuzion GFX, hitting 1ghz on the core, 2540mhz shaderclock.

[Doc PL]

Hello.
After a while I made same changes to my rig.
This is link to previous version: http://www.xtremesystems.org/forums/...07#post2245407

I added second graphic card NV 7950GT in SLI mode with Alphacool waterblock, then additional 2Gb of RAM with second RAM waterblock.
Now I have 10 blocks (7 homemade, 2 Alphacool GPUs, 1 Innovatek HDD) with 2 2x120 Radiators, 2 Laing waterpumps.
I also upgraded CPU to Athlon AM 6400 x2 (125Watt of heat to dissipate - previous produced only 65Watt)

Temperature : GPU 36* to 38* stress, Processor 40 to 48* during stress, NB 30*, Water 25*C. Wents are running at 2/3 of nominal speed . With two pumps running flowmeter showes 780 RPM on single punp just 520RPM.
Pictures now:
Before upgrade




And after upgrade, to fill the space I added old Voltometer and Amperemeter and some light with UV cathodes





Top of my case stays the same as previously.


Greets

[Mindless-Moron]

that's my ex MBO, p4c800 had a mobile pent on it, watercooled...
what's the rest of the config?

it's what it looks like, a p4 prescott 3.2, the board no longer likes to be overclocked, used to run it at 4ghz. an x800xt clocked at something silly, and some old school original BH5 ram.

The watercooling was basically an experiement, i'm buying a new computer soon and want to go straight to water, so i thought i'd try it out, funnily enough the whole setup was less than£100, so just under $200

[pika198]

Re did machine
Why? Improve loop flow and get more air to flow through the radiator.

[ACS]

My new water system that i upgraded in december from a total ghetto one. Pics are form last month and its abit tidier now actually.(got rid of the yellow ide cable)

[~aoe~]

Links to the images don't seem to be working

[ACS]

Changed hosting