BIOSTAR TA770 A2+ AM2+/AM2 AMD 770 ATX at the Egg

[xixo_12]

for the moment, i didnt try the mod bios, will try after get back my PSU from RMA, before this using the bios from biostar website n have difficulties in oc, the multiplier auto change.. so the clock speed will reduce n cant get any stabiliy there.. so sad, but will try later with this mod bios.. i want my psu faster

[gOtVoltage]

for the moment, i didnt try the mod bios, will try after get back my PSU from RMA, before this using the bios from biostar website n have difficulties in oc, the multiplier auto change.. so the clock speed will reduce n cant get any stabiliy there.. so sad, but will try later with this mod bios.. i want my psu faster

The Biostar Bioses are auto defaulting...The MOD Bioses YOU should RUN WITH PHENOM the stock bios will be fine for X2.

Also Make shure DUAL CORE OPTIMIZATION DRIVER is UNINSTALLED from system before you INSTALL AMD CnQ driver!

I had installed the Phenom driver and removed the dual core driver after , Its a big mistake! Simple to overl@@k.

It gave the TA770 and Phenom a 3000 piont performance hit in 3Dmark06 @ stock clocks @2300mhz with my GTS512mb.

((((This will only happen with a Phenom installed , it does not affect any X2!))))

I am still below what a 2200mhz Phenom should bench with simalar card due to the TLBpatch. this causes a 20/30% performance loss with my GTS512mb.

Tommorow i will install a 3870 and rerun my benches for a chipset to videocard comparison.

Proggress is very good with the TA770 Even though i still have the TLB performance hit and a fully un optimized Bios! this is with the Biostar 116.BST recalled driver. I now need to bench the Newest Mod driver with the changes i have done and see how this affects my Oc!

1st bench run @ 2300mhz Phenom and GTS512



(Same settings 2300mhz )
After finding and full removing Dual Core Optimization Driver.
ADD/Remove programs only removed it from the list and did not install it! Most likely because i had installed the (AMD phenom driver) before i uninstalled the (Dual Core Driver)