MMM
Page 14 of 26 FirstFirst ... 41112131415161724 ... LastLast
Results 326 to 350 of 633

Thread: My custom 8800GT cooling solution

  1. #326
    Xtreme Member
    Join Date
    Jun 2007
    Posts
    109
    EVGA and XFX allow users to change the stock cooler or replace the termal compound / TIM on the stock cooler w/o voiding the warranty.

  2. #327
    I am Xtreme-ly Unemployed
    Join Date
    Nov 2005
    Location
    Palmdale, CA USA
    Posts
    1,932
    Quote Originally Posted by tommithy View Post
    I was in no way bad mouthing Ian. I'm glad he made these. I was just trying to fill in the gaps as to why they may have sold out quickly. That's it.
    That comment was more a general statement/reminder to everyone--I didn't intend it to be directed at you, specifically. I should have made that a little more clear.
    I'm doing science and I'm still alive...

  3. #328
    Xtreme Enthusiast
    Join Date
    Nov 2002
    Location
    San Diego
    Posts
    796
    Quote Originally Posted by zLynk View Post
    That's hilarious! So, you mean to tell me that the application of an aftermarket paste is going to void the card's warranty, whereas removing the heatsink won't?!?! Here's a clue: neither action will inherantly void the manufacturer's warranty, as long as you live in the US.

    Check out the Magnussen-Moss warranty act... In short, it says that the manufacturer is responsible for proving that a consumer action is responsible for failure, prior to denying any warranty claim.
    I'm not going to go to court over a $300 video card, and just because there is an act does not mean this does not happen ALL the time, in fact it seems to happen more often than not!, Hence the reason there is the act. It just happened to my friend with his truck when the differential busted apart they denied the warranty because of the lift. He nearly had to go to court over this because the lift in no way affect the differential, not only that but his truck is often sold with the same size lift right from the dealerships (no fear package) Nothing like waiting for a court date for months over a $300 card...

    And in the end think about it, how easy would it be for them to blame my Application of Ceramiq on the memory for the graphics card dying. I have to SHIp them the card, so there goes all my evidence...if it was an EVGA card i would not be so worried. The card is a BFG and was the only one out at the time of purchase.

    Also I never said anything about Iandh either, that would not make sense because if it was not for him there would not be anything to even get disappointed about .
    Last edited by Justintoxicated; 01-24-2008 at 03:26 PM.
    Enermax Liberty 620 Modular
    Liquid Stacker
    8GB G.Skill PC2 8800 5-5-5-15 @ 400MHZ (PC6400 Speed)
    DFI LP LT X48-T2R
    Liquid Cooling:
    Thermochill PA 120.3 W/ Panaflo L1BXs/L1As
    D5 andFuzion V2, DD MCP Universal
    8800GTS G92
    Intel Q9450 @3200MHZ @ 1.18v (Wont OC any higher despite voltage increases)

  4. #329
    Xtreme Enthusiast
    Join Date
    Mar 2007
    Location
    Trenton, NJ
    Posts
    505
    so what you are saying is that everyone who got to complete a order will get one and those who didnt lost out
    MY RIG: BLUE DEVIL
    CASE*BLACK SILVERSTONE TJ07-MODIFIED
    MONITER*32-INCH SAMSUNG WIDESCREEN LCD TV
    OS*MICROSOFT XP HOME EDITION SP3
    MB*GIGABYTE P35-DQ6 F9B BIOS
    CPU*INTEL E7200 3.6GHZ 1.3v
    RAM*2GB G.SKILL PK PC8500**DEAD**
    PSU*PC POWER&COOLING BLACK QUAD 750W
    HD*SATA MAXTOR 150GB 8MB CACHE & SATA WD 250 GB 16MB CACHE
    GPU*GIGABYTE HD4670 @ 811/1100
    MY WATERCOOLING SETUP
    CPU*SWIFTECH APOGEE GTZ
    PUMP*SWIFTECH MCP 655
    RAD*SWIFTECH MCR320 W/ 3 SCYTHE ULTRA KAZE MED. SPEED
    RES*T-LINE
    TUBING*DURELENE PVC
    COOLANT*DISTILLED WATER & PT NUKE

    WORKLOG-Blue Devil TJ07

  5. #330
    Registered User
    Join Date
    Sep 2006
    Posts
    24
    Ha, I just realized how I missed them. I thought they'd be listed in the front row, being new and all or even mentioned in the update/store news. Didn't bother to scroll down to the 4th row.

    Duh me and noted for next time!

  6. #331
    Xtreme Member
    Join Date
    Jun 2007
    Posts
    109
    Petra's is awesome! Just got an email from them with the tracking number. That's fast.

  7. #332
    Registered User
    Join Date
    Sep 2006
    Posts
    24
    Quote Originally Posted by IsLNdbOi View Post
    Petra's is awesome! Just got an email from them with the tracking number. That's fast.
    Ha, just rub it in now! But congrats on getting a set!

  8. #333
    Xtreme Member
    Join Date
    Jun 2007
    Posts
    109
    Quote Originally Posted by WingHeart View Post
    Ha, just rub it in now! But congrats on getting a set!
    LoL. Yeah, I've never ordered from a company before and received a tracking number in less than an hour.

  9. #334
    Xtreme Enthusiast
    Join Date
    Mar 2007
    Location
    Trenton, NJ
    Posts
    505
    i know i better get one soon
    MY RIG: BLUE DEVIL
    CASE*BLACK SILVERSTONE TJ07-MODIFIED
    MONITER*32-INCH SAMSUNG WIDESCREEN LCD TV
    OS*MICROSOFT XP HOME EDITION SP3
    MB*GIGABYTE P35-DQ6 F9B BIOS
    CPU*INTEL E7200 3.6GHZ 1.3v
    RAM*2GB G.SKILL PK PC8500**DEAD**
    PSU*PC POWER&COOLING BLACK QUAD 750W
    HD*SATA MAXTOR 150GB 8MB CACHE & SATA WD 250 GB 16MB CACHE
    GPU*GIGABYTE HD4670 @ 811/1100
    MY WATERCOOLING SETUP
    CPU*SWIFTECH APOGEE GTZ
    PUMP*SWIFTECH MCP 655
    RAD*SWIFTECH MCR320 W/ 3 SCYTHE ULTRA KAZE MED. SPEED
    RES*T-LINE
    TUBING*DURELENE PVC
    COOLANT*DISTILLED WATER & PT NUKE

    WORKLOG-Blue Devil TJ07

  10. #335
    Xtreme Member
    Join Date
    Jan 2007
    Posts
    117
    Yes, Petras is awesome. I'd buy even more stuff from them if they stocked it (stuff like MB, CPU's, etc.)

    I got my tracking number as well.
    Asus Maximus Forumula
    Q6600 @ 3.6ghz @ 1.44v Batch L739B770
    XFX 8800GTS 512mb 783c/1944s/2400m
    Zalman ZM600HP
    D-Tek Fuzion WB, MCW60, iandh custom ramsinks, MCP355 w/Petra top, MCR320 Rad

  11. #336
    Xtreme Member
    Join Date
    Jun 2007
    Posts
    109
    Just curious, how much did these go for in the various group buys?

  12. #337
    Xtreme Enthusiast
    Join Date
    Mar 2007
    Location
    Trenton, NJ
    Posts
    505
    wats a group buy
    MY RIG: BLUE DEVIL
    CASE*BLACK SILVERSTONE TJ07-MODIFIED
    MONITER*32-INCH SAMSUNG WIDESCREEN LCD TV
    OS*MICROSOFT XP HOME EDITION SP3
    MB*GIGABYTE P35-DQ6 F9B BIOS
    CPU*INTEL E7200 3.6GHZ 1.3v
    RAM*2GB G.SKILL PK PC8500**DEAD**
    PSU*PC POWER&COOLING BLACK QUAD 750W
    HD*SATA MAXTOR 150GB 8MB CACHE & SATA WD 250 GB 16MB CACHE
    GPU*GIGABYTE HD4670 @ 811/1100
    MY WATERCOOLING SETUP
    CPU*SWIFTECH APOGEE GTZ
    PUMP*SWIFTECH MCP 655
    RAD*SWIFTECH MCR320 W/ 3 SCYTHE ULTRA KAZE MED. SPEED
    RES*T-LINE
    TUBING*DURELENE PVC
    COOLANT*DISTILLED WATER & PT NUKE

    WORKLOG-Blue Devil TJ07

  13. #338
    Banned
    Join Date
    Mar 2007
    Location
    French Quarter of Grinchville
    Posts
    2,853
    Justinintoxicated, by just removing the cooler on a BFG card, you already voided the warranty There is no way you can put it back and still look stock since the core use some special compount (a silver TIM) and the ram use a white TIM.

    I know what I'm taking since I own a BFG 8800GTS 640 MB and I know my warranty is now voided. I know I should have gone to XFX and EVGA but at the time of purchase, I didn't consider watercooling the card.

    Don't waste your time trying to cheat the BFG warranty and accept the loss. You can sell the BFG card with the stock cooler since the warranty isn't valid for 2nd hand owners anyway then buy a card with modding-friendly warranty.

  14. #339
    Xtreme Enthusiast
    Join Date
    Nov 2002
    Location
    San Diego
    Posts
    796
    Quote Originally Posted by zLynk View Post
    That's hilarious! So, you mean to tell me that the application of an aftermarket paste is going to void the card's warranty, whereas removing the heatsink won't?!?! Here's a clue: neither action will inherantly void the manufacturer's warranty, as long as you live in the US.

    Check out the Magnussen-Moss warranty act... In short, it says that the manufacturer is responsible for proving that a consumer action is responsible for failure, prior to denying any warranty claim.
    Quote Originally Posted by Xilikon View Post
    Justinintoxicated, by just removing the cooler on a BFG card, you already voided the warranty There is no way you can put it back and still look stock since the core use some special compount (a silver TIM) and the ram use a white TIM.

    I know what I'm taking since I own a BFG 8800GTS 640 MB and I know my warranty is now voided. I know I should have gone to XFX and EVGA but at the time of purchase, I didn't consider watercooling the card.

    Don't waste your time trying to cheat the BFG warranty and accept the loss. You can sell the BFG card with the stock cooler since the warranty isn't valid for 2nd hand owners anyway then buy a card with modding-friendly warranty.

    Sure you can, If the card dies just put the stock cooler back on using all the stock TIMs, ...I just would not want to run it this way since there would be poor contact. But it will look the same when they remove it regardless. I don't feel like I'm cheating the warranty since I have not done anything wrong, sometimes what they don't know won't hurt them. I purchased BFG because that was the only option at the time.
    Enermax Liberty 620 Modular
    Liquid Stacker
    8GB G.Skill PC2 8800 5-5-5-15 @ 400MHZ (PC6400 Speed)
    DFI LP LT X48-T2R
    Liquid Cooling:
    Thermochill PA 120.3 W/ Panaflo L1BXs/L1As
    D5 andFuzion V2, DD MCP Universal
    8800GTS G92
    Intel Q9450 @3200MHZ @ 1.18v (Wont OC any higher despite voltage increases)

  15. #340
    Xtreme Addict
    Join Date
    Mar 2007
    Posts
    1,489
    Holy crap this thread blew up over lunch!


    I ran into a LOT of crap and personal obligation over the holiday, in addition to my 40+ hrs/week full time job. Honestly Petra's order would have been filled long ago if all had gone to plan. As of now all that is behind me and I finally am able to devote some real time to these.


    I will update this thread daily with information on the production status. The first shipment I can guarantee is monday, and I will likely use express mail (UPS red is too expensive) so they can be in stock on tuesday. No promises but I may be able to get some out on saturday.
    Asus G73- i7-740QM, Mobility 5870, 6Gb DDR3-1333, OCZ Vertex II 90Gb

  16. #341
    Xtreme Member
    Join Date
    Jan 2007
    Posts
    117
    Quote Originally Posted by iandh View Post
    Holy crap this thread blew up over lunch!
    Everyone wants your awesome ramsinks!!! The best part about them is that they bolt on. No need to use thermal tape, superglue, epoxy, etc.
    Asus Maximus Forumula
    Q6600 @ 3.6ghz @ 1.44v Batch L739B770
    XFX 8800GTS 512mb 783c/1944s/2400m
    Zalman ZM600HP
    D-Tek Fuzion WB, MCW60, iandh custom ramsinks, MCP355 w/Petra top, MCR320 Rad

  17. #342
    Xtreme Member
    Join Date
    Jan 2008
    Location
    Port Orange, FL
    Posts
    269
    Quote Originally Posted by tommithy View Post
    Everyone wants your awesome ramsinks!!! The best part about them is that they bolt on. No need to use thermal tape, superglue, epoxy, etc.
    Now you just need to come up with 4-5 more must-have items, hire some people and rent a warehouse to set up production in.

  18. #343
    Xtreme Enthusiast
    Join Date
    Nov 2002
    Location
    San Diego
    Posts
    796
    Quote Originally Posted by iandh View Post
    Holy crap this thread blew up over lunch!


    I ran into a LOT of crap and personal obligation over the holiday, in addition to my 40+ hrs/week full time job. Honestly Petra's order would have been filled long ago if all had gone to plan. As of now all that is behind me and I finally am able to devote some real time to these.


    I will update this thread daily with information on the production status. The first shipment I can guarantee is monday, and I will likely use express mail (UPS red is too expensive) so they can be in stock on tuesday. No promises but I may be able to get some out on saturday.
    Your rocking the sinks man. I'll just shut up now.
    Enermax Liberty 620 Modular
    Liquid Stacker
    8GB G.Skill PC2 8800 5-5-5-15 @ 400MHZ (PC6400 Speed)
    DFI LP LT X48-T2R
    Liquid Cooling:
    Thermochill PA 120.3 W/ Panaflo L1BXs/L1As
    D5 andFuzion V2, DD MCP Universal
    8800GTS G92
    Intel Q9450 @3200MHZ @ 1.18v (Wont OC any higher despite voltage increases)

  19. #344
    Registered User
    Join Date
    Sep 2006
    Posts
    24
    Quote Originally Posted by iandh View Post
    I will update this thread daily with information on the production status. The first shipment I can guarantee is monday, and I will likely use express mail (UPS red is too expensive) so they can be in stock on tuesday. No promises but I may be able to get some out on saturday.
    I'll have my F5 button standing by then! I can easily wait til Tues.

    A congrats is definitely in order though. Everyone loves your sinks and have really shaken up the GPU memory 'sinks market, with you coming out as #1.

  20. #345
    Xtreme Enthusiast
    Join Date
    Mar 2007
    Location
    Trenton, NJ
    Posts
    505
    yes i got a set i just read email ladies and gents they have been shipped
    MY RIG: BLUE DEVIL
    CASE*BLACK SILVERSTONE TJ07-MODIFIED
    MONITER*32-INCH SAMSUNG WIDESCREEN LCD TV
    OS*MICROSOFT XP HOME EDITION SP3
    MB*GIGABYTE P35-DQ6 F9B BIOS
    CPU*INTEL E7200 3.6GHZ 1.3v
    RAM*2GB G.SKILL PK PC8500**DEAD**
    PSU*PC POWER&COOLING BLACK QUAD 750W
    HD*SATA MAXTOR 150GB 8MB CACHE & SATA WD 250 GB 16MB CACHE
    GPU*GIGABYTE HD4670 @ 811/1100
    MY WATERCOOLING SETUP
    CPU*SWIFTECH APOGEE GTZ
    PUMP*SWIFTECH MCP 655
    RAD*SWIFTECH MCR320 W/ 3 SCYTHE ULTRA KAZE MED. SPEED
    RES*T-LINE
    TUBING*DURELENE PVC
    COOLANT*DISTILLED WATER & PT NUKE

    WORKLOG-Blue Devil TJ07

  21. #346
    Registered User
    Join Date
    Nov 2007
    Posts
    24
    Quote Originally Posted by Justintoxicated View Post
    I'm so effing pissed off right now I dont even know what to do i feel like throwing my video card in the trash, waiting since before X-mas and I have to get in a 10 minute window at work? I can't beleive they really sold that fast unless the shipment was only like 20 of them...I think someone got greedy and bought them all.
    How do you think I feel? I paid for my set in November and still have yet to receive them. In other words, you really don't have much to complain about and at least you haven't paid for them yet. Hopefully my set will magically arrive today now that I've posted this lol.
    MSI P6N-SLI Platinum @ 1333MHz FSB (333x4) | E4400 / AC Freezer 7 Pro @ 3.0GHz (333x9) +0.0375 vcore (1.35v)
    4GB G-Skill (F2-6400PHU2-2GBHZ) @ 667MHz (1:1, 333x2) 4-4-4-12 1T @ 1.9v | XFX AlphaDog 8800GT | Corsair HX520w | WinXP 32bit | Dell 2007WFP

  22. #347
    Xtreme Addict
    Join Date
    Mar 2007
    Posts
    1,489
    Quote Originally Posted by yacoub View Post
    How do you think I feel? I paid for my set in November and still have yet to receive them. In other words, you really don't have much to complain about and at least you haven't paid for them yet. Hopefully my set will magically arrive today now that I've posted this lol.
    The last message I sent you was on the 4th that they were going to go out, which ended up being the Jan. 7th shipment; the last of which I've had trouble with. Your set will reship UPS on monday along with several others which should (hopefully ) wrap up all of my public orders for good.

    The shipping issues I've had are exactly the reason I decided to go wholesale on these. I've pulled about $400 in merchandise out of my own pocket to keep people happy, and jeopardized the good standing of my paypal account with folks filing uneccesary claims due to problems that are completely out of my control. I've kept good records besides one or two members that slipped through, and I am damn impressed that I have managed to pull it off so well so far.
    Asus G73- i7-740QM, Mobility 5870, 6Gb DDR3-1333, OCZ Vertex II 90Gb

  23. #348
    Xtreme Member
    Join Date
    Dec 2007
    Location
    St. Louis
    Posts
    155
    I'm not sure why everyone is b*tching. You need to remember this is a single individual that is probably working to fill over 100 orders. You act like he has a whole shop of workers making these things...this is just a side job also.
    Last edited by momoceio; 01-25-2008 at 09:59 AM.
    • Thermaltake Mozart-TX
    • Corsair 620HX
    • Gigabyte 965P-DQ6
    • Intel C2D E6400
    • 2 x 1GB G.Skill PC8000
    • eVGA 7800GT CO 256mb
    • 2 x 320GB Hitachi - RAID0
    • DD TDX - CPU
    • DD Maze4 - GPU
    • DD Laing D5
    • Black Ice 240mm RAD

  24. #349
    Banned
    Join Date
    Mar 2007
    Location
    French Quarter of Grinchville
    Posts
    2,853
    I think there is definitely a market for those ramsinks and I believe more players can be added to improve the availability.

    If I can get the DWG file of the ramsinks and try to strike a contract with a local machine shop, it can be doable for a reasonable price.

  25. #350
    Xtreme Member
    Join Date
    Jan 2007
    Posts
    117
    w00p! Just ordered my XFX 8800GTS so now I'll have something to attach the ramsinks too!!!

    Next week is going to be a fun one.
    Asus Maximus Forumula
    Q6600 @ 3.6ghz @ 1.44v Batch L739B770
    XFX 8800GTS 512mb 783c/1944s/2400m
    Zalman ZM600HP
    D-Tek Fuzion WB, MCW60, iandh custom ramsinks, MCP355 w/Petra top, MCR320 Rad

Page 14 of 26 FirstFirst ... 41112131415161724 ... LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •