Quote Originally Posted by xixo_12 View Post
can share the link to the bios that you used??
http://www.rebelshavenforum.com/sis-...;f=53;t=000463

Read everything.

Note :some Bioses can be buggy...

Ive tried each one listed and Was able too boot no matter what..You must have a Phenom with any of these bioses to be Stable/Boot properly...Biostar needs to come out with a functioning NPTFID// CPU-Nb vcontrol or a Memory controler Volt adjustment...With these options the chip will do better..

Ive Also found there is no way to really up the Volts of the memory controler in any of these bioses..Including Stock. By just only raising the Vcore ,its just not enuff and only adds heat in the Kitchen.There needs to be an adjustment for the memory controler Volts to be stable while overclocking...Phenom acts simalar to Ocing a 6400+ or 6000+, needs Volts for memory controler! HT and memory setting are a whole new ball game..I can not use any of the memory dividers although ive set each one manually it defaults to 400mhz!

The Mod Bios A78XAB21.A7X is pretty good and the B06.nba/ZXX bios pretty decent..

I also Used the Flash tool that is built into the mobo..Works to flash 100%! Or you can use a bootdisk and use AWDFlash. Make shure the Board is not Overclocked while flashing!

The Bioses are in link at the top

@Polygon is working extremly hard , many late nights ! He's The Bios king with this Ts770 that all i know!. Thank him for the Bioses not me