M3A overclocking

[jpierce555]

It does show my voltage at 1.237 on the nb, but it only shows 2.2 on the cpu speed so I don't know if it is accurate.

[justapost]

Does the 1.5v on the x2 work with you? Another thing I noticed was the 1.5v setting dropped voltage back down, but at 1.525/1.55 it did work. I never tried higher.

As far as actual nb voltages mine don't show on anything but the bios. I never thought about AMD power monitor.

Strange it worked flawless up to 1,55V beyond it's locked.

It does show my voltage at 1.237 on the nb, but it only shows 2.2 on the cpu speed so I don't know if it is accurate.

Yep, AMD PWM does not read the current ref HT from the clockchip and assumes 200MHz.

[planet456235]

a new Beta 0601 is out!

But still the Vcore Bug with the Phenom....

[justapost]

a new Beta 0601 is out!

But still the Vcore Bug with the Phenom....

Thank's found it on their ftp sites. So still no vcore beyond 1,25V hope they will fix this asap, starts to annoy me, that this board can not oc a phenom as far as it's ancestor.

[informal]

Justapost ,can you please post the link for the ftp site?
Anyhow,board is running great and stable for now,all with 0406 bios .

[chado]

The link is on the first page of this post

[informal]

Thanks mate and bad me =>

[justapost]

Justapost ,can you please post the link for the ftp site?
Anyhow,board is running great and stable for now,all with 0406 bios .

Here is direct link to version 601, to make reading flawless.
That 1,55V upward lock does not annoy me but 1,25V max for a phenom is something they have to fix.

Can someone tell me where I can find the superio chip on that board? I have an osciloscope here for a week and want to measure that chip.

[informal]

Thanks for the link man .
As for the location of SuperIO chip,it's right next to PCI3 slot(near the edge of the board,normal/90 degrees oriented to PCI3 slot).Look at page 2-3 of manual for M3A.