I'm Back!!!!!!!!!!!!!!!!!

[chew*]

stock cooler is temporary.......I'm not a big air buff......i have 2 watercooling units at my disposal that may need just a little updating.......I also have liquidfrostbyte thats a chiller good for -50 and 2 old school mach 1's 1 modded one brand spanking new........

vid is 1.225 and yes its a GO

stepping is L737B045

i would upload a pic of the cpu but my webspace is borked atm it seems.....

For the life of me i can't remember how to take screenshots..........and paste them.........

[chew*]

Btw what should i be expecting or pushing for with this ram etc tightest timings at rated speed......its rated is pc 6400 5-5-5-12 and so far i've got it down to 4-4-4-9...pc 6400 rated voltage is 1.9 board is tossing 2.0 to it auto..

package says TWINX2X2048-6400 G

version 7.3?

[chew*]

Allrighty did some quick researching familiarized myself with bios a bit.......decided to roll with stock volts for now and enabled loadline calibration for less vdroop............vcore now reads 1.192 priming at 3.0 gig stock volts....53C on cpu........gonna see how it does then push it more until stock volts throws errors........not liking my NB temps.......whats the lowest i can run the volts on that while oced.........it's seeing 1.36v atm....

and could someone give me a refresher on taking screenshots in vista etc........core 0 and 1 run hotter so im guessing those will be first to fail...

[Houdini]

NB runs very hot on the maximus.

Why - I have no idea, there are plenty of passive coolers.

[chew*]

I'll attend to the chipset issues soon enough, i have a couple heatpipe chipset coolers lying around. should handle the task.........IRC my temps barely reached 32C with them on the RD580 and that ran warm also......

50 minutes of prime passed at 3.0g stock volts gonna push it more.......