quad core temps

[pvtdonuts]

I'm running my G0 on a single loop with a pa120.3, dtek fuzion and a D5 and I max out @ 57C when running Small FFT's in prime. Sorry bout the big pic

[disruptfam]

when i loading 62c @ 3.2ghz with my b3 i wish i had a G0....

Ambients are high though...

i can get it 3.4ghz when ambients are a bit lower but still....

Temps stay the same if i had my fans @ low or high so that would suggest my rad is .......able to handle the heat??

whats the max i my cpu can handle under load??? 70c???

[Isriam]

so is adding more surface area to a radiator going to give me a lower delta

[septim]

not much +1

(lowering ambient and keeping it low would be much better = aircon room...)

[fireice2]

10c is quite a huge temp diff!

would running pure alcohol help in the temps?

[Talonman]

snicker...

[leo_bsb]

just reading these temps, why is it people watercool again? They are only 10 degrees lower than good air and my ambients are 29 degrees.

only 10º??? you should say all that immense vast big and great 10º!!!
We all should remember the forum name.

[leo_bsb]

Download Prime 95 v25.5. Set it up to run 8k FFT "in place" only and see what your temps are. They'll go at least 10c higher. Which is why I asked. You have to know exactly how someone tests, and how that test is configured before you can gauge temps.

Just a suggestion,

andyc

I used prime too, same results.
I told you I did all torture tests available. I did prime plus rthdribl_1_2 and atitools at the same time
The max I saw my temperatures go running all at the same time was 55, average for 26 hours was 51.8

[leo_bsb]

ok, suddenly I started to lie

[nzbleach]

I was just being generous with the 10 degree difference. Seeing people loading at 60 degrees on water when my ambients are 28-30 degrees with my CPU loading at 65 degrees (g0 Q6600) @ 3.6ghz 1.50 vcore on a TRUE it just doesnt seem right? Watercooling seemed to have a much bigger advantage 2 -3 years ago it seems.

[leo_bsb]

Impossible if you had it configurted the way I suggested, big difference. You can't tell me you run FAH at 51c and Prime 95 small 8k "IN PLACE" FFT's and get the same temps. Just can't happen. Not on water anyway.

andyc

maybe you are half right or I am half wrong, looking the 4 cores I got mixed temperatures after prime.


55-57-49-52, ambiente should be 27º today. Is it impossible?