**Official ABIT IX38 QuadGT Review/Overclock/Guide Thread**

[Supershanks]

New Bta out, thank's to Gilgamsh for sending me it

M704b_12.b09
Not checked 1:1.25 strap yet. Note I got a C1 error updating, may be my sloppy flashing, but if you do update be careful. If you have issues please feedback.

[R*r]

New Bta out, thank's to Gilgamsh for sending me it

M704b_12.b09
Not checked 1:1.25 strap yet. Note I got a C1 error updating, may be my sloppy flashing, but if you do update be careful. If you have issues please feedback.

i just flash using 12b09 and doesnt give me c1 error so the bios should be ok

my d9 can run using 1:1.25

440x9/550@5-5-5-15

last time only my "superchip" ic that can use that setting now my d9 can use it also n pass 3d

give it a try

[gilgamesh1]

New Bta out, thank's to Gilgamsh for sending me it

M704b_12.b09
Not checked 1:1.25 strap yet. Note I got a C1 error updating, may be my sloppy flashing, but if you do update be careful. If you have issues please feedback.

cheers old boy

Will work with abit as much as aI can to get the remaining issues addressed

Will keep you updated as things progress buddy

gilgamesh

[EXPANDER]

My E6750 cpu Abit ix38 quad gt mobo [Ram ratio 1.1] B05 Bios 1.48 - 1.52 vcore 522 Fsb Good

E6750 Retail
Abit ix38 Quad Gt Retail
Mushkin 2X 512 MB DDR2 800 Mhz ram
1000 Watt Silverstone Psu
160 Gb Seagate Baraccuda 7.10 Hdd
Windows Xp Sp2
Cpuz 1.43
B05 Bios



515x 8 = 4123 mhz

[xwoodoo]

can anyone help me with this one?

ive just recieved the Abit IX38..

i have flashed the latest bios beta09.. i am running a q6600@3825(425x9@1.39v load) with a TT 120 Ultra Xtreme... thing is i have just switched form an Asus P5E and with the same CPU and cooler i had at this same frequency and voltage. Anyway the temps are much higher now ... i was getting like 35-36C IDLE and now i have like 45-47C.. also load temps are higher 78C vs 85C.

i have all teh cpu options set to disable in the bios .. just like on Asus..

also the pwm are hitting 120+ on quad priming...although i have a fan on the pwm rad.

any advice?

[jcool]

Erm... your CPU is actually stable at 78C coretemp?!
Mine flukes out at about ~68C... as does about any other G0 Quad. Is that a B3 you got there? Would explain PWM temps and why your CPU can handle that temp. What current readings are you getting with µguru?