Asus P5KC

[Leeghoofd]

With the ram not goign out of spec I meant the mhz as when I set 400FSB bios automatically sets 1200 for the ram so I need to put it at 1000mhz...

I would reset the bios and start all over again and post us the whole list of settings you do in this template (these settings work for me, my ram needs only 2.0 volts to do 1000mhz but at 5-5-5-15):

JumperFree Configuration Settings
AI Overclocking: Manual
CPU Ratio Control: Manual
- Ratio CMOS Setting: 9
FSB Frequency: 400
PCI-E Frequency: 101
DRAM Frequency: 1000
DRAM Timing Control: Manual
CAS# Latency: 5
RAS# to CAS# Delay: 5
RAS# Precharge: 5
RAS# Activate to Precharge: 15
TWR: AUTO
TRFC: AUTO
TWTR: AUTO
TRRD: AUTO
TRTP: AUTO
DRAM Static Read Control: Disabled

Transaction Booster: Disabled
Boost Level: 0
Clock Over-Charging Mode: AUTO

CPU Spread Spectrum: Disabled
PCIE Spread Spectrum: Disabled

CPU Voltage: 1.5250
CPU Voltage Reference: AUTO
CPU Voltage Damper: ENABLED
CPU PLL Voltage: 1.6
DRAM Voltage: 2.00
FSB Termination Voltage: 1.4
North Bridge Voltage: 1.25
North Bridge Voltage Reference: AUTO
South Bridge Voltage: AUTO

Advance CPU Settings
CPU Ratio Control: Manual
- Ratio CMOS Setting: 9
C1E Suppport: Disabled
Max CPUID Value Limit: Disabled
Vanderpool Technology: Disabled
CPU TM Function: Disabled
Execute Disable Bit: Disabled
PECI: Enabled