Official DFI LanParty UT X38-T2R(and LT) Discussion/Review/Overclock/Guide Thread

[Origin_Unknown]

All better now, slightly undervolted, but that is fine by me!

where are the measuring points linflas?

[zsamz_]

What is max. FSB that you achieved with this mbo?

i got to 550 i havent pushed voltages
i'm happy @ 500 24/7 for now lol

[Donnie27]

Am I the only one that thinks $330 for a new board seems kinda high? When the X58 or whatever comes out they will probably cost $400++

No, you're not the only one who think this is high! I was wondering if I was the only one who thought it was BS as well LOL!

[C-N]

where are the measuring points linflas?

As far as I know the NB measure point is the same as the P35.

CN

[Origin_Unknown]

I Just ordered this set of coolers from Germany

http://www.mips-computer.de/

They will fit on P35 / X38 and probably also X48

PRJ

would the mips block set be worth it? (north / south / volt reg)? I want to watercool and thought that maybe a whole set might be a good idea?

As far as I know the NB measure point is the same as the P35.

CN

thanks C-n, i went through the whole thread and i think it was post #895 has all the pics for all the volt readings

[Razor_Blade]

I believe that the mips PWM block isn't to great. I dont feel like digging up the thread from the water cooling forum, but it is in there if you search (relatively recent thread). I am waiting for EK water blocks.

[Jor3lBR]

Where are you guys connecting the SATA DVDrom drives? Sata ports 1-6 (ICH8) or 7-8 (JMicron ACHI)?

[rithina]

Where are you guys connecting the SATA DVDrom drives? Sata ports 1-6 (ICH8) or 7-8 (JMicron ACHI)?

Sata ports 1-6 (ICH8

[zanzabar]

ita an ich9, if u have no pata drives then disable the jmicron

[bpowder]

No, you're not the only one who think this is high! I was wondering if I was the only one who thought it was BS as well LOL!

$330 is crazy it was only $279.99 at newegg before they ran out.

[Praz]

They are $276.99 at MotherboardPro and will be in stock on the 14th. Over a 1000 posts in this thread and people have to pick one almost 2 months old to complain about a price that isn't even valid now.

[Jor3lBR]

Sata ports 1-6 (ICH8

ita an ich9, if u have no pata drives then disable the jmicron

Thanks guys I will install the SATA DVDrom now, as the IDE's cause the board to act weird....
-------------


Anyone here with Q6600 that could help me find the max safe temps?

I'm running OCCT and my Q6600 is peaking 65oC on Smartguarding and 63 on Core Temp 0.95. Room temps: 70oF or 21oC.

CPU temp add of +7 on BIOS. Voltage and FSB etc as follow:
http://i11.tinypic.com/8b8kfom.png


Is that ok? I have an Asetek 03-L-1349 Kit Waterchill Dual 120mm Xtreme just for the CPU...

[zsamz_]

$330 is crazy it was only $279.99 at newegg before they ran out.

i paid 276$ first week of december last year

[linflas]

They are $276.99 at MotherboardPro and will be in stock on the 14th. Over a 1000 posts in this thread and people have to pick one almost 2 months old to complain about a price that isn't even valid now.

gotta give 'em props for reading the whole damn thing though.

So, I am just starting my work week, won't be able to play till Monday. Now that NB volts are fixed, going to go for the elusive 4GHZ stable Q6600.

I picked up a new Q6600 from Fry's a 40B vid is 1.2 and is doing 3.6 crunching @ 1.35V, which I may be able to drop, but have not had a chance to really play.

I am still trying to wrap my head around the bios settings. All the memory subtiming, gtl ref voltage, etc... Big learning curve for me. 14 months cursed with 680i, kinda set in my ways.

[OnDborder]

Will these "beta" bios' support a e8500? It's getting close to release.

[t_ski]

Bios Fix is being worked on as I type this to fix NB voltages...RGone...

Hey RGone you ol' Wassup???

[Origin_Unknown]

Will these "beta" bios' support a e8500? It's getting close to release.

i thought they supported all 45nm cpus?

[RGone]

iss ole dudely still uh hanging manz.

Hey RGone you ol' Wassup???

[Origin_Unknown]

putting mine together now, just noticed i didnt get any screws with mine... is that the case with everyone?

[linflas]

putting mine together now, just noticed i didnt get any screws with mine... is that the case with everyone?

What screws/ Like motherboard set screws? Do any mobo's come with them, never had one that did myself, came with the case.

[Origin_Unknown]

What screws/ Like motherboard set screws? Do any mobo's come with them, never had one that did myself, came with the case.

ah yes, i'm loosing my mind today

[Dede99]

Origin, you could give me some link's for good stores in UK for computer parts like RAM and MB's?
Thanks in advance and good luck with your new TOY

[Origin_Unknown]

Origin, you could give me some link's for good stores in UK for computer parts like RAM and MB's?
Thanks in advance and good luck with your new TOY

i use;

scan.co.uk
overclockers.co.uk (some people dont like this site)
komplett.co.uk
kustompcs.co.uk
ebuyer.com
tekheads.co.uk
memoryc.com (or i will be when i get the gskill pc8000 ram)

back on topic some pics of the board plugged in (future hardware to come)
I've spent a few hours today cleaning my fans / heatsinks etc but ive not had a chance to turn it on yet so ill be doing that asap.





also ive tried to read the voltages but i need a nub lesson on where the ground points are

[jooney]

Found my 24/7 Settings.
OCZ ReaperX(2x2GB)runs very well,with the G.Skill 4GBPQ no way on Performance Level 6

[Dede99]

Thank you BRO, I got already very good prize @ komplett.co.uk

i use;

scan.co.uk
overclockers.co.uk (some people dont like this site)
komplett.co.uk
kustompcs.co.uk
ebuyer.com
tekheads.co.uk
memoryc.com (or i will be when i get the gskill pc8000 ram)