Water Cooled Case Gallery

**ls206** · 01-11-2008, 08:27 AM

just added a few bits to my loop.

GPU block for my new 3870 (no ram sinks...i'm so pissed off i got sent a cheap card from overclockers....)
also a microres.
GPU & CPU (6300@2.8) running at ~ 30/36 nice!

**adidassler** · 01-11-2008, 10:06 AM

ill be receiving it by tomorrow... =)

**taylormsj** · 01-11-2008, 10:43 AM

Here we go, put this together today, another CM 690 under water.

Lots of bubbles but there are none in my loop after a few hours bleeding

So nearly a kink, those coils definatly help to stop kinks, i thought they wouldnt

Comments would be greatly appreciated, my first water loop

Specs are in my sig, with :

D tek Fusion with 4.5 nozzle

MCRres

MCR320 radiator with 3 Yatloon highs pulling

Swiftech D5 pump (number 5 setting)

7/16 " tubing

Distilled water for now

Thanks

**Zeus** · 01-11-2008, 11:31 AM

Lol, seeing that red pcb reminded me of the good old Abit NF7-S days, i had to look real close to see if it was one or not.

**taylormsj** · 01-11-2008, 12:40 PM

haha yeh its not the nicest of colours isit?

**dnb#** · 01-11-2008, 01:21 PM

Originally Posted by adidassler

@dnb

you never fail to amaze me with your liquid chilled setup, especially your res and coolant...

fesser + distilled water right?

Yep, Feser aqua distilled + feser blue dye

Thanks m8 you're my drive for doing this over and over

**HotGore** · 01-11-2008, 05:12 PM

Here is a quick pic of my system.

**disruptfam** · 01-11-2008, 06:23 PM

kool

**Nate P.** · 01-11-2008, 06:25 PM

Gore, your tubing is really cloudy...

**HotGore** · 01-11-2008, 07:50 PM

Ya I know it has been about 2 months since I last changed my tubes. I will try something different then Clearflex next time.

**MrMick** · 01-12-2008, 12:23 AM

My latest build

.

1 - Lian Li PC-A05B
2 - Corsair HX 520W ATX2.2 Modular SLI Compliant PSU
3 - Intel Core 2 Duo E6600
4 - Gigabyte GA-P35-DS4
5 - GeIL 2GB (2x1GB) PC2-6400C4 800MHz Ultra Low Latency DDR2
6 - EVGA GeForce 8800 GTS 320MB
7 - 2 Akasa AK-191-BL Blue Ultra Quiet 120mm Fan (replace stock fans)

Watercooling components .

1 - Thermochill PA120.3 with Xilence Red Wing 120mm Quiet Fan
2 - D-TEK FuZion CPU Block
3 - D-Tek FuZion GFX Block - with ramsinks
4 - Danger Den Fillport (Delrin)
5 - EK Multioption RES 100 Rev2
6 - 12V Laing DDC-1T Pro 10W with EK Waterblocks Laing DDC X-TOP 1/4"

Think i might try some different feser this doesnt look very orange

need to sort the side panel out as well .

**LockBreaker** · 01-12-2008, 03:19 AM

Youe feser is UV-reactive is'nt it? I think it should be orange when you innstall some UV-lightning, maybe? Or not?

**skid9uk** · 01-12-2008, 04:25 AM

I have a D5 pump,D-tek fuzion block with a 5.5mm acelerator nozzle and washer,1 PA120.2 rad,5 1/4" res, ocz ram cooler. all in a Antec P182 Case. Ive only just finished it

**Origin_Unknown** · 01-12-2008, 04:56 AM

^^ is that two different colour tubes?

**skid9uk** · 01-12-2008, 05:15 AM

yea ones a darker gray

**peterpiper** · 01-12-2008, 05:30 AM

Here's this years build..
Built a basic server into an old Stacker too. It was a great Christmas...

**disruptfam** · 01-12-2008, 06:08 AM

thats a very nice build you have there...

Very clean... nice hardware aslo!!!

maybe put them gfx cards under water two aswell hey??

second loop

**RockfordFosgate** · 01-12-2008, 06:17 AM

I like this Stacker very clean WCS

**Marcng** · 01-12-2008, 06:43 AM

Hi, first time posting my rig here.

first set-up

components:
D-Tek FuZion
EK79FC
PA120.3
Alphcool bay res
DDC2 w/ petra's top
1/2" tygon

then revamped it, added EK88GTX and NF4 block

Martin's Elbows

taped up all the holes on the V1000 to make sure there's better airflow

custom-made side panel, my design

**LockBreaker** · 01-12-2008, 06:52 AM

Nice build. I like the sidepanel. How did you manage to do that?

**Marcng** · 01-12-2008, 07:22 AM

i guess you wouldn't believe me if i said i hacked my way through with a dremel right?

got it laser-cut~~but the V1000 has a sidepanel with 2mm thickness, so it was tougher than normal ones, they usually are 1mm thick.

**Okda** · 01-12-2008, 07:41 AM

Originally Posted by Marcng

i guess you wouldn't believe me if i said i hacked my way through with a dremel right?

lol

got it laser-cut~~but the V1000 has a sidepanel with 2mm thickness, so it was tougher than normal ones, they usually are 1mm thick.

good job for sure, i like the idea of doing something that change the normal look of a computer's case

**disruptfam** · 01-12-2008, 08:16 AM

nice panel...

cable management needs a lil work

**ls206** · 01-12-2008, 09:38 AM

nah, they're all hidden form public view,

great window

**Marcng** · 01-12-2008, 10:53 AM

Originally Posted by ls206

nah, they're all hidden form public view,

great window

yeah that's what i thought, who's gonna see them apart from me???
and thanks and thanks above.

man those 4" UV tubes do heat up!!
turning both on makes the interior of the case 2 degrees hotter!!

Thread: Water Cooled Case Gallery

Thread Tools

Search Thread

Display

MY new set up

New build..

Bookmarks

Bookmarks

Posting Permissions