**Official DFI LanParty UT P35-T2R Review/Overclock/Guide Thread**

[Aivas47a]

hey you fellas that have quad core cpus .. what is the max fsb that you have been able to achieve with your dfi boards... the max (stable) that i was able to pull off with my q6600 was 450.. this was done with air cooling.

sorry im too lazy to browse the whole thread

max stable is 480 on qx9650

[Mekrel]

Hi guys, does anyone know of any guides for making a bootable USB stick? The ones I've found so far require getting boot files off a Floppy, which there isn't on this laptop.

Thanks

Crucial Anniversary booted first time in this system

[Solarfall]

I haven't really put much effort into finding the max fsb but I did have a quick play & got to 505fsb on a TRUE 120 when I first got her.

CN

max stable is 480 on qx9650

thanks for the depressing info guys.. hehe
well it seems that i will have do a hell of a lot more tweaking with this board

[freeloader]

Hi guys, does anyone know of any guides for making a bootable USB stick? The ones I've found so far require getting boot files off a Floppy, which there isn't on this laptop.

Thanks

Crucial Anniversary booted first time in this system

http://www.bay-wolf.com/usbmemstick.htm

No floppy required.

[M3kk]

2008/01/09 - Bios

Major Reasons of Change:
Added 45nm CPU VTT Voltage control table.

http://us.dfi.com.tw/Support/Downloa...FLAG=B&SITE=US

[mad_skills]

January bios out already..nice.

[Aivas47a]

thanks for the depressing info guys.. hehe
well it seems that i will have do a hell of a lot more tweaking with this board

It's all in the VTT and the gtl settings. Raja's detailed review at anandtech is a great starting point (though in my small sample yorkfield likes lower gtl settings than kentsfield). Also I think there is a fair bit of luck 'o the draw involved. good luck to you!

[turtletrax]

hey you fellas that have quad core cpus .. what is the max fsb that you have been able to achieve with your dfi boards... the max (stable) that i was able to pull off with my q6600 was 450.. this was done with air cooling.

sorry im too lazy to browse the whole thread

485 FSB Q6600 w/Fuzion dedicated loop, but stock heatpipe w/transpiper & 70mm fan.

[emoners]

January bios out already..nice.

c'mon mad_skills, i know you wanna try it be our guinea pig (as Brother Esau isn't here anymore to toy around with new bios updates)

[DJSUB]

it has a bug on a voltage settings

[Brother Esau]

Hey, Mike you get you're Bios Chips yet?

[DJSUB]

i dont have camera to post the screenshot but i already tried yesterday

[DJSUB]

yep i got it yesterday

thank you very much again brotha!

[Brother Esau]

You found both of them right?

[DJSUB]

Yes i got one + the bonus

[quake6]

It's all in the VTT and the gtl settings. Raja's detailed review at anandtech is a great starting point (though in my small sample yorkfield likes lower gtl settings than kentsfield). Also I think there is a fair bit of luck 'o the draw involved. good luck to you!

You said it's all in VTT and gtl settings.So what is max for VTT and what is use of VTT and GTL?

After long time,I switched to Intel and those settings are pretty much confused me...

[Sepander]

With VTT 1.60V (1.58V actual) default GTL-settings are 115/115/115. How does it go when using yorkfield? Same values?

[ryba1]

has anyone tried the beta bios 12/27?
new settings? performance increase?

tnx

Yes, I tired a new bios 12/27 ...and the next day my comp stop to see disks!
I go back to 12/24.
the other way..I`ve changed a block on CPU and temp on NB too high.
What kind of cooling will be the best?

[cantankerous]

12/27 was borked for me too. Bios options were overlapping each other in writing and because of this you weren't able to change certain settings as they weren't showing up. On top of that I could not post with same settings used in 12/24 bios. It kept powering up and shutting itself down over and over with a 8.8. code. Flashed back to 12/24 and all is gravy. If the new 1/8 bios is similar I won't even be trying it till someone says it is successful in stability and performance.

[quake6]

I have one question.Could somebody explain me something on this page http://www.anandtech.com/mb/showdoc.aspx?i=3129&p=13
Under Fig 2)
If I use lets say 1.5v VTT,than I must use 1.05v for GTL,or BIOS setting 140,right? Or I got something wrong? They said 70% of VTT,so 1.5v VTT - 30%= 1.05V

[Aivas47a]

You said it's all in VTT and gtl settings.So what is max for VTT and what is use of VTT and GTL?

After long time,I switched to Intel and those settings are pretty much confused me...

Check out this article: http://www.anandtech.com/mb/showdoc.aspx?i=3129

I just basically took Raja's suggested settings and then trial-and-error tweaked up and down. For me, yorkfield did better with lower gtl values than those suggested for a q6600 -- approximately 90 at 1.5 VTT or 100-105 at 1.6 VTT for max fsb.

[quake6]

That is the same article... I didn't understand,so... I must (ok it is suggest) use 30% of VTT,or? Could somebody explain that little better? tnx

[C-N]

That is the same article... I didn't understand,so... I must (ok it is suggest) use 30% of VTT,or? Could somebody explain that little better? tnx

This will help

http://www.edgeofstability.com/

CN

[gsan]

sorry for lazy to read all the pages

a noob question... channel 1 and channel 2, which is more easy to overclock?

[quake6]

This will help

http://www.edgeofstability.com/

CN

There is just definition of what GTL is,but I need to know how to set it...