**Official DFI LanParty UT P35-T2R Review/Overclock/Guide Thread**

[quake6]

I don't like the sound of the 430w PSU or the fact its an Enermax have you a different larger one you can try on it?

Are you using the auxiliary 12v & floppy connectors ? (they help high fsb for me)

GTL+ Buffer strength & Host slew rate have never stopped my board booting but NB GTL has, when I push my boards fsb up high the NB GTL makes all the difference as to what will boot/run & be stable enough to bench.

I also need just about all the vNB my board has for 2.7~2.8vdimm to run PI 32M

I am nobody to judge anybody but 3v to the RAM is suicidal they will die I hope you can accept this & you know what you are doing (no offence intended)

CN

That enermax has powered 2900xt with 12.05v on load (measure with digital multimeter) and now I use just PCI graphic card,not PCI-E...So there is enough power

Well I didnt connect floppy connector and as you said they help you for max fsb,but this is on 200MHz FSB and 800MHz memory...

I have some old gmh memory and want OC to max with cl3.Come to 1020MHz 3-3-3-8 with 2.88v,but I want more
I know what I´m doing,so dont worry

So NB GTL is maybe problem? I´ll try it,but nothing until weekend.Maybe some other advice?

And thanks

[C-N]

That enermax has powered 2900xt with 12.05v on load (measure with digital multimeter) and now I use just PCI graphic card,not PCI-E...So there is enough power

Well I didn't connect floppy connector and as you said they help you for max fsb,but this is on 200MHz FSB and 800MHz memory...

I have some old gmh memory and want OC to max with cl3.Come to 1020MHz 3-3-3-8 with 2.88v,but I want more
I know what I´m doing,so dont worry

So NB GTL is maybe problem? I´ll try it,but nothing until weekend.Maybe some other advice?

And thanks

Sorry to sound like a d1ck about the 3v but I had to ask.

Its not the 12v supply thats the problem its the startup current that appears to catch quite a few higher spec & high power PSU's out. I personally have never had this startup problem with a PSU but I have heard of it several times hence my dislike for your PSU.

I am not real big into extreme benching sure I play when I'm bored but I have never ventured up to 3v as I have killed plenty decent sticks of RAM @ 2.6~2.8v. I would be real unhappy about benching 3v without a smooth ripple free PSU & or an optimiser.

I am sure there will be someone along with real hardcore extreme benching experience that can help you out, this place is full of nutters

CN