32m SPi Low Clock Challenge

[dinos22]

SOOOOOOOOOOOOORRRRRRRRRRRYYYYYYYY about the name stuff up Jodi (j/k )

i noticed bachus is running a 0503 bios for same board and he is able to run 1T and AI Clock Twister - [Strong];
AI Transaction Booster - [Enabled 3] so it's pretty important for me too to get those to improve on superpi

0903 doesn't let me go beyond 1 or 2 in booster and middle setting for twister and 2T

i did a non maxmem run and it did 13m flat 3.6Ghz which is ok but not great

it was on 200 strap as well but i haven't tested others so not sure if it is faster or not (starting Pi times seemed to improve) heh

one thing my mobo won't let me is to tighten the PL.....seems unusually high compared to some which hurts performance too even though i've had a swiftech copper heatsink and fan hammering the NB with 1.25-1.7v

[luihed]

(starting Pi times seemed to improve) heh

I wouldnt go with that info especially the initial value cos it could be the direct opposite... With same settings my faster times have higher initial value than my slower times....

[dinos22]

I wouldnt go with that info especially the initial value cos it could be the direct opposite... With same settings my faster times have higher initial value than my slower times....

yeah i've studied your runs and you have the slowest start i've ever seen

i remember in AMD days start meant nothing
i only looked at the difference between loop 1, 2, 3, 4 and would know how well or bad the run would be

[skyline2550]

sub 10mins

E8500, 4634MHz
BILTZ EXTREME

[staxm]

[3oh6]

wow, big update. sorry ladies, i have had my head up 3DMarks ace and buried in memory work...no time for fun stuff for the last couple weeks. i'll keep my shyt together though and keep this thread hopping. i did get some 45nm chips so all you orange color scores better watch yourself...even though my blue scores are still holding their own gotta love high FSB and DDR3.

here is just a teaser...i am coming for ya K-squad, 1:2 at 7-6-5 and it will be go time:

sub 13min

http://www.abload.de/img/sub13spi32m3331.5mhzfh0.png

good to see Team Serbia rocking the 45nm...look out lads, these boys know how to put it down.

Looking forward to it
BTW i didnt finish tweaking the RAM for my run, I actually got a little better efficiency on the same day afterwards, but at higher clocks and lower time (which conflicts with the objective of this thread).

All said and done though, im horrible with SPI efficiency, no matter how hard i try.

we definitely need to whip your SPi OS/process into shape...he's one of your team members George, should you have helped him by now?

Time Zone: 19.xx Update Again
Proc Speed: 2222.39 MHz
Actual Time: 19.59.438s
Multiplier: 6 x 370
Ram Type: DDR2
Ram Speed: 1110 mhz
Ram Timings: 4-4-4-4
Divider: 2:3
Processor: Intel Core 2 Quad Q6600
Chipset Used: P35
CPUZ Validation : http://valid.x86-secret.com/show_oc.php?id=305240

http://img120.imageshack.us/img120/4...22ghzcavz0.png

this is what i like to see...fighting for every last MHz for the 19.xx crown. i will spend some time with the 45nm and DDR3 down here...just to push you harder. keep up the good work mate

darn... i missed the 2nd cpu-z screen for my run. I hope this one gets entered though...

http://i54.photobucket.com/albums/g1...e8400sub15.jpg
Time Zone: 14.xx
Proc Speed: 3000 MHz
Actual Time: 14.57.921s
Multiplier: 6 x 500
Ram Type: DDR2
Ram Speed: 1000 mhz
Ram Timings: 4-4-4-4
Divider: 1:1
Processor: Intel Core 2 Duo E8400
Chipset Used: P35
OS: Vista Ultimate 32-bit
CPU-Z Validation

-Matthew

no worries on the second CPU-Z, just makes my job easier. include it next time and we won't throw you out...but bouncers are standing by

sub 10mins

E8500, 4634MHz
BILTZ EXTREME

http://xs224.xs.to/xs224/08061/32m828.jpg

heck of a way to introduce yourself, don't you think? welcome to XS and welcome to the 32M LCC...where memory comes to die and 32M runs our lives. looking forward to seeing more from ya.

[sobih25]

here is just a teaser...i am coming for ya K-squad

GJ . We're waiting for ya .

[eva2000]

we definitely need to whip your SPi OS/process into shape...he's one of your team members George, should you have helped him by now?

I'm in same boat as Tim... efficiency wise I'm bit behind the likes of say dinos... think it comes down to me not being able to get any benefit from copywaza tweaks still - just doesn't seem to help me at much at all LOL

[Benji Tshi]

It seems that my previous posts was lost during XS migration....i was too busy to submit it again, but here i am with my first sub7, made with my friend Casimir37 (more to see here)

6.xx
5075.2......Benji Tshi & Casimir37............6.59.797....29x175 ....1050mhz.....7-7-6-20....2/12..X58

[Misko]

I wouldnt go with that info especially the initial value cos it could be the direct opposite... With same settings my faster times have higher initial value than my slower times....

+1, my rule if first iteration is good shut it down and start it over again