**Official ABIT IP-35 Pro Review/Overclock/Guide Thread**

[dtube]

@Ace-a-Rue and the rest of you 1 question!

Please reccomend me the settings for the following categories for 9 x 400 = 3600MHZ DDR2 800MHZ 1:1 Ratio...Thats all I want...The chip will boot at 3600mhz but prime 95 fails within 2 minutes but I have been running it at 3400mhz 1.5V set in bios for 18 hrs prime 95 stable and a week of general use.....I know its hard to give the exact settings but with the speed I want at the low 400 fsb I thought it might be easy for you guys to guide me the right way.....

L737A822 10/17/07 Q6600 gO STEPPING


uGURU Utility > Voltages Control

CPU Core Voltage _____
DDR2 Voltage _____
CPU VTT 1.2V Voltage _____
MCH 1.25V Voltage _____
ICH 1.05V Voltage _____
ICHIO 1.5V Voltage _____
DDR2 Reference Voltage ____
CPU GTLREF 0&2 ____
CPU GTLREF 1&3 ____

My temps are not an issue and the pwn area runs cool....I am using 16.04 Bios

Thanks in Advance

I'm not Ace but I hope my info here will be useful to you. I'm using 16B03 BIOS. (note: 16B04 default is a little different and temp reporting is way off for me that's why I'm using 16B03). Anyway, using similar hardware as yours at 3.6 GHz, I have:
FSB = 400
Multi = 9
DDR ratio 1:1
Vcore: 1.47V
MCH: 1.33V
The rest are at default.

At 3.8 GHz, I have:
FSB = 422
Multi = 9
Vcore = 1.58
MCH = 1.37
ICH = 1.09
The rest are default