AMD Athlon 64 LE-1620, Singlecore, 1024Kb L2-Cache, 90nm, F3-Stepping

[hary]

http://www.hwbot.org/quickSearch.do?hardwareId=CPU_1536

hey! could you add to database LE-1600 too? thx

[funkflix]

Great results, FF!

I just installed windoze on my new build and have starting to play with my LE1620.

After a few hours' fiddling, it's running at 3.2G / 1.35v (stock is 1.2), with the stock heatsink! (It IS pretty cool indoors, about 55F/12C)
It's running an overnight stress test at 3.3 as I type. A big-ass Zalman is on the way, and I really hope to see 3.5+ with a little more voltage.
Maybe I can give you and your fantastic chip a run for the money!

I'll post updates ASAP.


LE-1620 The little chip that could!
Gigabyte GA-M61P-S3 (NF 6100 chipset)
Absurd, ginormous, 800W power supply in an equally absurd Supermicro case.
(Thanks to the IT guys at work for tossing it in the dumpster!)
Middle of the road Munchkin memory. 5-5-5-12 at 800.

Sounds good so far!

http://www.hwbot.org/quickSearch.do?hardwareId=CPU_1536

Thanks!

funkflix : are u using ice, in u r WB??and what board do you used??

I benched just outside, with an ambient of around - 1°C. Board was the Asus M3A32-MVP Deluxe.

[danisimo]

how does this processor compare to the intel celeron D 347 which is a very good overclocker or the intel celeron 440? I have seen the D 347 going to 5 ghz in some reviews.

[fakhrain]

Celeron D is nothing compare to K8 architecture.

[_d_]

oooooh!
amazing

[Geonerd]

Well hell! I'm hitting the wall hard at 3.3Gig.

Juicing it to 1.5v gets me 3.35, just, and I'm real hesitant to give it much more with the stock heatsink - things get toasty in a hurry! Even if a big big fan will get me 3.4+, the extra heat generated at high V runs contrary to the philosophy I had in mind when building the system. I think I'll settle for 3.1~3.2 at lower voltage. (When the Zalman arrives, I'll be sure to give it another go and report any improvement. What's a reasonably safe voltage level to run on air?)

On the other hand - maybe I can find an excuse to buy another one....

Thanks for sharing your fantastic results, FF.

-Moo

[sstrokerace]

Hehe no, i will hold that cpu as long as i can. It is one of the cpus you ever search for!

Funk,

What RAM are you running with this CPU?

[Blacklash]

Very nice OC.

[funkflix]

Well hell! I'm hitting the wall hard at 3.3Gig.

Juicing it to 1.5v gets me 3.35, just, and I'm real hesitant to give it much more with the stock heatsink - things get toasty in a hurry! Even if a big big fan will get me 3.4+, the extra heat generated at high V runs contrary to the philosophy I had in mind when building the system. I think I'll settle for 3.1~3.2 at lower voltage. (When the Zalman arrives, I'll be sure to give it another go and report any improvement. What's a reasonably safe voltage level to run on air?)

On the other hand - maybe I can find an excuse to buy another one....

Thanks for sharing your fantastic results, FF.

-Moo

Temperature is anything with this new F3 CPUs! Sometimes it is even better to lower voltages to get a higher stable clock, than up the Vcore. Try a better cooler and i think you will see way better results. (without any guarantees for sure )

Funk,

What RAM are you running with this CPU?

2x1GB G.Skill PC8500 GBHK with 2,5V.

Very nice OC.

Thanks!

----------------------------------------------------------------------------------------------------------------------------------------------

I bought a second one of this 0742BPMW, but i will not test it. It is for my friend. Will post his results here soon!

[sstrokerace]

Let us know how the other BP runs!

[funkflix]

A quick test i did for my friend with the other 0742BPMW. They are twins!



With 23°C water too.

[sstrokerace]

I just picked up two so we will see if I get any BP's or not, fingers crossed! This reminds me of the old Opty 146 days where your manufacturing week made a difference in chip speed!

[funkflix]

I just picked up two so we will see if I get any BP's or not, fingers crossed! This reminds me of the old Opty 146 days where your manufacturing week made a difference in chip speed!

Good luck and please let us know which batch u recieved + how it clocks!

[Moto7451]

I have one on order. Should be coming in tomorrow. I'll be sure to post the stepping, week, and a screenshot .

Edit: Make that wednesday due to the holiday

[FatAlbert]

hey, maybe you know what is wr on Athlon 1620 with box colling ?

btw

i don't like my cpu (1620). He don't want works at def vcore and 3ghz, I have to give him 1,350v ofc it's box

[sstrokerace]

I'm guessing that's Polish sarcasim? lol I must get it due to the large percentage of Polish in me.

Not too many records for this out there right now, the single cores seem to be forgotten. I have a feeling in 2008 there are going to be a LOT more though!

Bret

[FatAlbert]

Bret, maybe it be forgotten but in a world is people wich want work with the single core cpu and overcloking him.

ps.

Do have some problem with Polish?

Our discussion don't give this thread nothing useful.

Reagards Albert

EOT

[massman]

Good luck and please let us know which batch u recieved + how it clocks!

keep the 0018 and switch to dice, please =D

[sstrokerace]

Do have some problem with Polish?

No, my family is mostly POLISH!

[clon22]

Omg, these are some neat chips...
heehee...
Nice!

[knopflerbruce]

The good one was a 0742BPMW, but what else? (I mean, the 5 letter code right before the year/week)

Seems as these CPUs are nice. A single-core CPU would be nice for old games if it works at higher freq's than dual cores.

[sstrokerace]

No clue yet what else.... the DPMW sample didn't do as well, but we don't have a lot of testing and statistics from this thread yet. I have two on the UPS truck coming in Friday.

Bret

[gOtVoltage]

No clue yet what else.... the DPMW sample didn't do as well, but we don't have a lot of testing and statistics from this thread yet. I have two on the UPS truck coming in Friday.

Bret

Well i have a 0741 CPMW ...My Asus M2N32 deluxe bios is 1201 version ..It dosnt support this chip ...But i managed to get 3.25Ghz with 1MSpi = 25s Thats 1s slower than my 6000+@3.5ghz

Ive tried the 1402bios no go dosnt load windows ! Ive tried 1503bios ,,Same thing so im stuck with the 1201...Unless theres a version i dont kwow about,,,This is the best i can do with unsupported Bios...I cant read temp in bios,Dont know if its good... 2.4ghz= 8c 3.25ghz =13c ,,it would be nice to read my heat range..Ive only raised the CPU to 1.5vcore...My memory and board setting will act up if i try to push more with out Bios.





The 1402 and 1503 bios work but wont post windows no matter what! Oh well..This Chip is to Replace my Orleans 3200+which is only a 2.0ghz...Ill Oc the Le to 2.8ghz on that mobo... Nice little single core for 55bucks no dout about it

[socket]

nice OC, but try SuperPI XS mod

[funkflix]

keep the 0018 and switch to dice, please =D

All prepared for some dryice session on friday!

Bought the MSI K9A2 first for this, but that board is not that good.. DFI is incoming now!

The good one was a 0742BPMW, but what else? (I mean, the 5 letter code right before the year/week)

Pictures of the cpus are here in the Thread!