Anybody know where I could get some PCI Slot Covers that have vents in them?
Like the ones the Antec Nine Hundred comes with:
I can't find them anywhere
PCI Slot Covers with vents. Help Please!
Anybody know where I could get some PCI Slot Covers that have vents in them?
Like the ones the Antec Nine Hundred comes with:
I can't find them anywhere
Why not just remove the empty slot covers? If that's what you need, better vents.
All stock for now, no need for more, but it's gonna be soon methinks.
Giga Xtreme 58 mobo i7 965 ES D0 step Corsair 1600 6 gig
SLI GTX470 EVGA
EK HF nickle blue top CPU block (free from Eddie)
Koolance 470 waterblocks
One big loop, two 120x3 rads. Pa 120.3 and XSPC RX 120x3. Swiftech 35x pump with V2 restop. GT AP15 fans.
Banchetto Tech Station
120 GB SSD, and a few other drives.
1000W UltraX3 PSU, 900 watt (1500VA UPS
23.999" Acer GD235hz and 24" Acer H243H
Oops... duh...
Lol, I might just do that...Thanks
But still, is there I place I can get them at?
Hehe, never seen them availible like that. go to Antecs site and ask?
All stock for now, no need for more, but it's gonna be soon methinks.
Giga Xtreme 58 mobo i7 965 ES D0 step Corsair 1600 6 gig
SLI GTX470 EVGA
EK HF nickle blue top CPU block (free from Eddie)
Koolance 470 waterblocks
One big loop, two 120x3 rads. Pa 120.3 and XSPC RX 120x3. Swiftech 35x pump with V2 restop. GT AP15 fans.
Banchetto Tech Station
120 GB SSD, and a few other drives.
1000W UltraX3 PSU, 900 watt (1500VA UPS
23.999" Acer GD235hz and 24" Acer H243H
You could drill holes out in your current covers.
- Thermaltake Mozart-TX
- Corsair 620HX
- Gigabyte 965P-DQ6
- Intel C2D E6400
- 2 x 1GB G.Skill PC8000
- eVGA 7800GT CO 256mb
- 2 x 320GB Hitachi - RAID0
- DD TDX - CPU
- DD Maze4 - GPU
- DD Laing D5
- Black Ice 240mm RAD
There was a thread around here with single-slot backplates for... i think it was 8800s using a cooler that didn't vent out the back. You could use one of those as a vent... but I don't see why, you could drill holes/cut slots etc. in normal PCI slot covers, or just leave them off.
Core i5 760 3.6GHz daily | Gigabye P55-USB3 rev2.0 | Thermalright Ultra-120 Extreme | 2 x 4GB Corsair XMS3 | AMD Radeon HD 4830 | CM 690 |
These are for Lian Li cases, and I am not sure if they will fit your case.
http://www.silverpcs.com/product_inf...a7b0ea589d2e08
Intel Xeon X5650
ASUS Sabertooth X58
3 x 2 Gb G.Skill PC3-12800
MSI GTX 780Ti Gaming 3 Gb
Seasonic X850
Corsair 750D
Heatkiller 3.0/D5 & EK Top/Alphacool UT60 240
Why put a cover on? Even one with full width holes will be more restrictive than no cover. If you are lucky you can even fit an 80MM exhaust fan between the video card(s) and the sound card or w/e.
Ok, well thanks guys!!
I'll probably just end up cutting holes through my current slot covers.
Originally Posted by CJ145
I have one 60x60mm fan ( amd stock fan ) sitting in the middle drawing hot air out of the case
I have one 60x60mm fan ( amd stock fan ) sitting in the middle drawing hot air out of the case
Yea it works great. Pulls the video card's heat right out of the case. When I had a 7950GT a 80mm Sunon on the slot covers right below it dropped load temps by 8C.
The only slotcovers I saw are THESE
It's from a German online shop
http://www.performance-pcs.com/catal...ducts_id=22979
Same item as the ones from silverPC, which ever is better for you in terms of shipping cost.
Posting Permissions
Reply With Quote
Bookmarks