Official eVGA 780i Discussion/Review/Overclock/Guide Thread

[Yooper]

The 8800GT will not do Tri-SLI

I know that. My second computer is running one 8800GT. I would run two 8800GTs in SLI on my second rig and upgrade my primary rig to whatever is TRI SLI capatible at the time. Right now it is just GTX and Ultra, but I would expect more mainstream cards down the road will be trisli capatible. I just want to have the TRISLI option available to me.

[Yooper]

I dont have an XFX, I have the Evga (see sig).

Dont worry about having the XFX verison..Its pretty much the exact samething...I have the XFX have not gotten any of the A0 problems like another user has on his EVGA...

Ive gotten my Q6600 up to 3850...tried to hit 4gig but wanted way to much volts for air...I did boot to windows at 4050 and got all the way to the cpu test in 06 when it crashed..

What FSB are you running?
What are your voltages for the NB and CPU?
Are you running memory linked or unlinked?

[RottenMutt]

I am reading from the back of the box and I am seeing that my XFX780i is only rated for 1333fsb. What are people going to do when the QX9770 comes out? I think that one has 1600fsb.

Did you read the foot note:
* While Nvidia technology will provide FSB speeds beyond spec, the processor must also be capable of this speed.

I think DDR2 is faster (benchmarks/games) at this time with lower latencies. give ddr3 some time.

[RottenMutt]

I paid the Newegg TAX and got the XFX board.

Will XFX void the warranty if I remove the stock NB cooling solution and watercool the NB and use the EVGA SB heatsink?

I will need to find something for the power transistors, any suggestions?

[Rincewind]

I paid the Newegg TAX and got the XFX board.

Will XFX void the warranty if I remove the stock NB cooling solution and watercool the NB and use the EVGA SB heatsink?

I will need to find something for the power transistors, any suggestions?

The EVGA was available this morning at the Egg (plus tax :[ ). Any reason you opted for the XFX? In fact, I don't see the XFX listed at newegg any more

[GAR]

I was burning a cd with nero 8 and my computer froze....

[Rincewind]

I was burning a cd with nero 8 and my computer froze....

Then what?

[GAR]

Then what?

Im trying to figure out if its a stability issue or just a crappy program................my stability tests run fine, i can run all games fine for hours, so i am guessing its either drivers, or a crappy program.

[gmod]

The EVGA was available this morning at the Egg (plus tax :[ ). Any reason you opted for the XFX? In fact, I don't see the XFX listed at newegg any more

Because they are exactly the same board...

[BobyTT]

Anyone here with QX6700 and XFX 780i?

Any tips?

[RottenMutt]

The EVGA was available this morning at the Egg (plus tax :[ ). Any reason you opted for the XFX? In fact, I don't see the XFX listed at newegg any more

The EVGA was sold out when I ordered it last week. They are exactly the same board minus warranty. XFX is two year transferable; and EVGA is a life time warranty to the original buyer if registered within thirty days, or a year from the original purchase date if resold.
I probably will not have the board longer then six months so it doesn't matter and i got to keep 10 bucks in my pocket.
I'm wondering if XFX is refusing to sell to the egg since they are ignoring the suggested retail price and gouging. It is a stupid move by newegg and they will lose more in sales now from lost customers! they should refund the difference and sweep the mistake under the carpet if you ask me. But by upping the price they are able to meet demand...

[billdavis]

well i got it in the mail today

all i get is error code FF and nothing happens. ever... i just turns on and shows code ff, strait to ff no boot codes just ff and only ff. i dont know what ff is ffing about

[dinos22]

FF usually means all is good but there is a whole bunch of codes the PC goes through before it ends up on FF

we had a board with FF issue after our LN2 session but started working again after some hair dryer action

try another CPU bill

[jas420221]

well i got it in the mail today

all i get is error code FF and nothing happens. ever... i just turns on and shows code ff, strait to ff no boot codes just ff and only ff. i dont know what ff is ffing about

F that!

Sux man....

tried resetting cmos and all that jazz right?

[billdavis]

FF usually means all is good but there is a whole bunch of codes the PC goes through before it ends up on FF

we had a board with FF issue after our LN2 session but started working again after some hair dryer action

try another CPU bill

ehh i got this cpu from andre yang and it is the only cpu i have
anyone near stuttgart want to come over with a cpu

[billdavis]

F that!

Sux man....

tried resetting cmos and all that jazz right?

yeah bro i have tried every thing i completly rebuilt it and reset the cpu a million times. tried booting w/o ram or gfx card to see if i could get a error. tried d9 ram and the powerchip's i have. the code stays on ff from the second i hit power to the second i turn it off ??

i put this up on evga forum looking for a mod but im sure i will only get kids who know everything and tell me it is because i didnt plug in my monitor so i cant see the screen booting up

[billdavis]

dam im good

RE: New build, Dosent Work stuck @ code FF - 12/28/2007 2:21:56 PM
JCBananas2
Junior Member
Posts: 309
Joined: 1/1/2006
Status: online

FF means fully functioning (which means you are 100% good to go). Does your monitor turn on when you boot the computer? Can you get into the BIOS?

_____________________________

Intel E6600 @ 3.33 (415 X 8)
EVGA 680i A1
2GB GSkill GBHZ @ 830
OCZ GmerXtreme 700 watts
EVGA 8800 GTX @ 621/1000
CM Stacker 830


i owe my self a beer

u guys sit tight ill go get it to calm my nervs

[Justifire]

PSU connected in the right directions?

[Robilar]

I have the EVGA 780i coming in for Weds next week (maybe monday fingers crossed)

I paid $249 CAD (+GST of course 6%)

Does anyone know if the NB will interfere will a thermalright ultra 120e in the vertical position? I'm sure it will fit horizontally but I really don't want to exhaust warm air into my power supply.

[Icy]

going for the xfx as all the evga's seem to be sold out for the uk >_< unless anyone knows a secret online supply xD

[gmod]

Does anyone know if Coretemp is accurate with this board..Seems to be way off. plus getting really erratic temps on all the cores

Using a TR ultra120 extreme push pull..
c1=47
c2=42
c3=35
c4=35

Ive resetted the heatsink everything is perfect just like I had on my Striker...

[Malik]

Guys i have problem which mobo choose:

- topic mobo - EVGA 780i
- Asus Maximus Forumla SE ( X38 )

Primary conditions - good performance and good predispose for OC

Help needed

[eva2000]

Guys i have problem which mobo choose:

- topic mobo - EVGA 780i
- Asus Maximus Forumla SE ( X38 )

Primary conditions - good performance and good predispose for OC

Help needed

easy X38 unless you plan on SLI which 780i will be the one

[GAR]

Guys i have problem which mobo choose:

- topic mobo - EVGA 780i
- Asus Maximus Forumla SE ( X38 )

Primary conditions - good performance and good predispose for OC

Help needed

I have had both boards, and i can tell you the maximus has an issue where the board wont load the cpu at 100&#37; on certain voltages and fsb, the 780i has a couple of quirks as well, but with the 780i, you get no vdroop with a simple pencil mod and a equal quad overclocking board with the option of SLi, performance is very similar, maybe a bit of an edge to the x38 clock for clock, but nothing to go crazy about, overall for a gamer the 780i is a much better choice IMO, nothing taken away from the x38 or maximus, i would go for the 780i if you are a gamer, SLi is great for resolutions 1920x1200 and above.....the 780i has good ddr2 overclocking potential, got good clocks from my g.skill 4gb (2x2) ddr1000 kit, about 30mhz more on the 780i......good luck on your decision......just some insight from someone who has had the pleasure of working with both boards.

[billdavis]

well it seems i have a bad board

im pretty positive something is wrong with it accessing cmos chip and it is stuck on it's last known code of a working ff code

reasons i think this are
i have tried booting up withg everything uninstalled cpu, ram & gfx and as soon as i hit power it is just ff shown i get 2 yellow lights and 1 blue (im color blind so the yello could be any color) so it didnt show any other code so i figured it some how stuck on ff so i thought maybe bad cmos but i took that out and booted and still same no post operations just and only ff!! ive done a over night cmos clear

any ideas how to force it to access the cmos chip maybe ... shorting something?? i have put in for the advanced rma (to apo-ae in germany)and that will take about 4 days after ~ 4th of Jan but my main dielema is in my line of work i will be else where till late 2008 umm refining my counter strike jump strife jump techniques but i sooo wanted to improve my hwbot scores expecially with this sweet chip i got off of Andre Yang i guess ill just go buy a p5k preimum for about $350 usd out in town and do some single card Benchies

anyone near STUTTGART. De