Quote Originally Posted by Grnfinger View Post
After a quick 30 min test in my opinion CPU PLL has a direct affect on stability.
Took these settings

at 450x8@1080 on the 333 strap

CPU Voltage : 1.50
CPU PLL Voltage : 1.70
North Bridge Voltage : 1.49
DRAM Voltage : 2.1
FSB Termination Voltage : 1.40
South Bridge Voltage : 1.050
Loadline Calibration : Enabled

my ONLY CHANGE was CPU PLL, it was lowerd to 1.60 and prime would not run for more than 2 mins b4 BSOD

Set it back to 1.70 and prime ran 30 mins small fft b4 I stop'd it.
So there must be a direct relation to stability?
Anand said no added stability over 1.68v. Maybe try that and see if there is any difference.