G92 8800 GTS 512 MB Post your clocks and Scores

[Zeus]

I've been testing some more with mine and i found that ramping the speeds up in one go gives errors in ATI tool, slowly working your way up works fine though.

I also found that once i got yellow polygons in ATI tool i had to raise memsppeed a bit and i could continue clocking the shaders.

Strange but true, here's where i ended, stock cooler, no vmod and fan at 80%:

[VoRtAn_MaDgE]

I've been testing some more with mine and i found that ramping the speeds up in one go gives errors in ATI tool, slowly working your way up works fine though.

I also found that once i got yellow polygons in ATI tool i had to raise memsppeed a bit and i could continue clocking the shaders.

Strange but true, here's where i ended, stock cooler, no vmod and fan at 80%:

When you say no errors is without showing the well know yellow dots ?
I'm saying that cuzz i can do 840/845 core without errors but with that dots with my gigabyte...ati tool says no errors...

Fan still 70% ...didn't try above...too noisy, but for bench...what the hell

[Zeus]

That's the strang thing about ATItool, if i ramp up speed at once it gives an error after some time running (~10sec) but if i slowly clock my way up it will let me get away with some yellow dots or even yellow triangles without giving an error.

The settings i showed above are without yellow dots ,going higher gives the dreaded yellow dots, with giving an error though.

[VoRtAn_MaDgE]

Which version of ati tool are you guys using to change the clocks?
I'm using rivatuner for clocks and ati tool to test stability.

Improving (without dots )...fan 70% stock cooler no mods...



I already forgot my ultra days ago ...

Anyone got results aircooled with a 512 g92 vmodded card ?

[Zeus]

I just downloaded ATI tool 0.27.

I'm also using RivaTuner to overclock, this prog gives you the abilty to clock the shaders seperate from the core clocks.

Tried some more and found out that my mem rocks:

[Stelios]

Try 0.26 atitool .
My GTS was running at 870Mhz vmodded & aircooled.
Now it's watercooled at 950 and in a few days i'll put it on my vga singlestage to check how it goes under subzero temps .

[Zeus]

Looks like there aren't many people with this card yet?

Pushed some more for 06 and reached 15K with just a dualcore cpu, GFX is still cooled with stock cooler and unmodded.

[K404]

Nice K404
Did you have your GTS G92 voltmodded on air ?
If so what mhz core/mem and volts did you use ?

Hey Sorry- I didnt try- I went straight to water for the voltmods

[higgins]

Tempted to sell my 8800GTX and get this one.

Anyone has some/or willing to do some game benchies at 1680x1050 with AA/ANISO ON? In the benches i've seen the 512 GTS looses to the GTX/Ultra in higher res with AA on.

[Machinus]

Is newegg the only place that has these? The GT is so much cheaper...

[Zeus]

Is newegg the only place that has these? The GT is so much cheaper...

Really?

Here in Holland the GT is €239,- and the GTS is €299,-.

Since the GTS clocks so much better i think this is the one to have.

[DJConan]

CompUSA had the card a day early and I just happened to see it, so I've had mine since the beginning, but after initial OCing, Christmas stuff got in the way and I haven't been able to play with it anymore.

I didn't try breaking the links yet. Mine is currently running at 748/1855/1002. I was starting to get the yellow artifacts in ATI Tool w/o errors and that's when I stopped and lowered clocks to where they are now.

My 3DMark06 score is 15536 with my current settings. Not very exciting...I know.

[DJConan]

After reading this thread, I was inspired to revisit the OCing. What once caused some obvious artifacting originally, was not the case this 2nd attempt. I now have mine set to 780/1080/1890.

I haven't done much with the shader clock. When that gets pushed too far, would I get similar artifacts using ATI Tool? ATI Tool is new to me.

I used to use ATI Tray Tools and used that to program the speed and set the fan to increase with the temperature. When I ran a 3D App, the OC automatically occurred, is ATI Tool able to do this as well? I have profiles saved, but for now, I'm running my OC 24/7.

Thanks.

[nickless]

Can someone post a pics for pencil Vmod of GPU and RAM of 8800 GTS G92?!
Thanks!

[Trust]

Today, after switching to XP because of that stupid vista's TDR error, I was up to try some overclocking in my BFG 8800GTS (G92) and it was already overclocked by BFG with this clocks: 675/1674/972. So I installed RivaTuner to change the clock settings and ATI Tool 0.27 to test stability. This was what I could get today:



(Fan 70%)

Yes I know it's not much, but it's fine for today. Tomorrow is another day...

[gOtVoltage]

On Air for now...X2's dont score good so this is mainly what the card does! Would be and easy 15000-16000 with a Quad I like AMD though so when i get my new 9650BE ill have to crank out some numbers hehehe.Im shure even @3.2ghzx4core this will rock

The lower screen gives you an idea of what my card temp is while benching 900+ghz scores ill add later im still testing above that range.Imo memory sucks so does the B/Width!






My Cpu is Holding me Back ,, This card wants more

[Zeus]

Bumping a nice thread, i''m still curious what others are getting with theirs.

Here's what i get at 1.41V idle--1.46V load:



This is watercooled with an EK fullcover waterblock.

[cole2109]

3DM06


3DM05

[Zeus]

3DM06


3DM05

What core clock you did 06? It's hidden.

[GAR]

Riva tuner doesnt work with 169.28 drivers?

[JoeBar]

I have a Twintech 8800GTS on my 2nd gaming rig and i've found some strange things.

This is the first time (along with my previous 8800GT) that ATITool isn't the optimum stress test for my vga.

It can be ATITool stable (for 2 hours) @ 783-1782-1080mhz. But as soon as i play UT3 for 5' it freezes. I found out that i have to lower mem to 1010mhz to be UT3 stable.

I had experienced a similar prob with a 8800GT i had but with smaller difference in mem oc between ATITool and UT3.

The only similarity between the 8800GTS and 8800GT was qimonda mem chips. I'll grab another GTS on weekend and will post my results...

[Makubex_GB]

Core: 802
Shader: 1998
Mem: 2106

No vMods. Water cooled with MCW60. Room temp: 24C

[Luka_Aveiro]

Could anyone with a Q9550 and a GTS512 please post a 3dMark2006 score at stock speeds??? That would be so kind

Thank you

[chad]

Here is my score

[chad]