SuperMicro X8SAX
Xeon 5620
12GB - Crucial ECC DDR3 1333
Intel 520 180GB Cherryville
Areca 1231ML ~ 2~ 250GB Seagate ES.2 ~ Raid 0 ~ 4~ Hitachi 5K3000 2TB ~ Raid 6 ~
Heres 12hr + Prime95 run @ Stock Board Voltages less Vdimm @ 2.14 & CPU Vcore @ 1.4068 I am working on a Bios Template for the D.F.I LanParty UT 790FX-M2R and will post it up in addition to this Screen shot when its completed
For those of you who wish to post in this thread to further help things along I have made a D.F.I LanParty UT 790FX-M2R 11/22/07 Bios Template the attachment is at the bottom of the post I will be revising and adding to it but for now this covers the important grounds for Overclocking!
DFI LANPARTY UT 790FX-M2R (BIOS 11/22/07)
AMD Athlon X64 6400+ Black Edition 3.2ghz
OCZ FLEX XLC (PC2 9200) 5-5-5-18 2 x 1GB PN:OCZ2FX11502GK
HIS Hightech HD-3870 CATALYST 7.12
Auzentech XPlosion
Areca 1231 ML {Intel IOP 341} ~ 6 ~ 250gb Hitachi Sata II Raid 6 ~2~WD 74gb Raptors ~ Raid 0 ~
Plextor 750A
SilverStone OP1000
CM Stacker STC-T01
Attachment 69418Code:>HT Link Control: HT Link Width......................... - 16 bit HT Frequency.......................... - 800 MHz IH Flow Control Mode.................. - Disabled HT Link Tristate...................... - Disabled 2x LCLK Mode.......................... - Disabled Unit Id Clumping...................... - Disabled >CPU Feature: NPT Fid Control....................... - x10 Virtualization........................ - Enabled AMD K8 Cool&Quiet Control............. - Disabled >DRAM Configuration: MCT Memory Timing.................... - Manual Maximum Latency...................... - 8ns 2T Mode.............................. - Auto Cas Latency Time..................... - 5 Pre Charge Delay (tRAS).............. - 12 DRAM RAS# Precharge.................. - 5 DRAN RAS# to CAS# Delay.............. - 5 Bank to Bank Cmd (TRRD).............. - Auto DRAM RAS# to CAS# Delay.............. - Auto TRTP................................. - Auto Write Recovery (TWR)................. - Auto Write-Read Command (TWTR)............ - Auto TRFC0................................ - Auto TRFC1................................ - Auto TRFC2................................ - Auto TRFC3................................ - Auto Trdrd................................ - Auto TrwtT0............................... - Auto Twrrd................................ - Auto Twrwr................................ - Auto CS/ODT Pin Fine Delay................ - Enabled Bank Swizzle Mode.................... - Enabled Auto Tweak Performance............... - Enabled Optimal Performance Mode............. - Enabled >ODC Control Mode: DRAM Drivers Weak Mode.............. - Normal Output Drivers Comp................. - Normal >Channel A: CPU On-die Termination.............. - 300 ohms +/- 20% DQS Drive Strength.................. - 1.00x Data Drive Strength................. - 1.00x MEMCLK Drive Strength............... - 1.00x Addr/Cmd Drive Strength............. - 1.50x CS/ODT Drive Strength............... - 1.50x CKE Drive Strenght.................. - 1.50x >Channel B: CPU On-die Termination.............. - 300 ohms +/- 20% DQS Drive Strength.................. - 1.00x Data Drive Strength................. - 1.00x MEMCLK Drive Strength............... - 1.00x Addr/Cmd Drive Strength............. - 1.50x CS/ODT Drive Strength............... - 1.50x CKE Drive Strenght.................. - 1.50x >PWM Settings: PWM Control.......................... - Enabled CPU VID Control...................... - 1.40625v CPU Vid Special Add.................. - Auto CPU NB Vlotage Control............... - Auto CPU NB Vid Special Add............... - Auto DRAM Voltage Control................. - 2.12v SB PLL 1.2V Voltage.................. - 1.20v NB Core Voltage...................... - 1.20v NB PCI-E Voltage..................... - 1.250v NB HT Voltage........................ - 1.20v Genie BIOS Settings: Spread Spectrum................ - Disabled CPU Host/HTT Clock................... - 340MHZ CPU Host/HTT Boot Up Clock.............. - 280MHZ CPU Host/HTT Adjust Gap..................... - 5 PCI-E Clock.................... - 100MHZ
Last edited by Brother Esau; 04-03-2008 at 07:51 AM.
SuperMicro X8SAX
Xeon 5620
12GB - Crucial ECC DDR3 1333
Intel 520 180GB Cherryville
Areca 1231ML ~ 2~ 250GB Seagate ES.2 ~ Raid 0 ~ 4~ Hitachi 5K3000 2TB ~ Raid 6 ~
Heres 3500mhz @stock Board Voltage minus a little more Vcore added and some Vdimm also a screen shot taken 6hrs into prime to show temps of Board under full load
EDIT: Although this is completely Stable at these Bios settings as you can see I find that once you Reach around 350FSB you will want to Increase you NB Voltage , PCI-E -NB voltage Nb-HT voltage just by one notch each and it seems to reduce the Latency associated with Pages on the Internet not loading as Fast as they should as they do at 345FSB at my config.
DFI LANPARTY UT 790FX-M2R (BIOS 12/21/07)
AMD Athlon X64 6400+ Black Edition 3.2ghz
OCZ FLEX XLC (PC2 9200) 5-5-5-18 2 x 1GB PN:OCZ2FX11502GK
HIS Hightech HD-3870 CATALYST 7.12
Auzentech XPlosion
Areca 1231 ML {Intel IOP 341} ~ 6 ~ 250gb Hitachi Sata II Raid 6 ~2~WD 74gb Raptors ~ Raid 0 ~
Plextor 750A
SilverStone OP1000
CM Stacker STC-T01
Code:>HT Link Control: HT Link Width......................... - 16 bit HT Frequency.......................... - 800 MHz IH Flow Control Mode.................. - Disabled HT Link Tristate...................... - Disabled 2x LCLK Mode.......................... - Disabled Unit Id Clumping...................... - Disabled >CPU Feature: NPT Fid Control....................... - x10 Virtualization........................ - Enabled AMD K8 Cool&Quiet Control............. - Disabled >DRAM Configuration: MCT Memory Timing.................... - Manual Maximum Latency...................... - 8ns 2T Mode.............................. - Auto Cas Latency Time..................... - 5 Pre Charge Delay (tRAS).............. - 10 DRAM RAS# Precharge.................. - 5 DRAN RAS# to CAS# Delay.............. - 5 Bank to Bank Cmd (TRRD).............. - Auto DRAM RAS# to CAS# Delay.............. - Auto TRTP................................. - Auto Write Recovery (TWR)................. - Auto Write-Read Command (TWTR)............ - Auto TRFC0................................ - Auto TRFC1................................ - Auto TRFC2................................ - Auto TRFC3................................ - Auto Trdrd................................ - Auto TrwtT0............................... - Auto Twrrd................................ - Auto Twrwr................................ - Auto CS/ODT Pin Fine Delay................ - Enabled Bank Swizzle Mode.................... - Enabled Auto Tweak Performance............... - Enabled Optimal Performance Mode............. - Enabled >ODC Control Mode: DRAM Drivers Weak Mode.............. - Normal Output Drivers Comp................. - Normal >Channel A: CPU On-die Termination.............. - 300 ohms +/- 20% DQS Drive Strength.................. - 1.00x Data Drive Strength................. - 1.00x MEMCLK Drive Strength............... - 1.00x Addr/Cmd Drive Strength............. - 1.50x CS/ODT Drive Strength............... - 1.50x CKE Drive Strenght.................. - 1.50x >Channel B: CPU On-die Termination.............. - 300 ohms +/- 20% DQS Drive Strength.................. - 1.00x Data Drive Strength................. - 1.00x MEMCLK Drive Strength............... - 1.00x Addr/Cmd Drive Strength............. - 1.50x CS/ODT Drive Strength............... - 1.50x CKE Drive Strenght.................. - 1.50x >PWM Settings: PWM Control.......................... - Enabled CPU VID Control...................... - 1.42500v CPU Vid Special Add.................. - Auto CPU NB Vlotage Control............... - Auto CPU NB Vid Special Add............... - Auto DRAM Voltage Control................. - 2.16v SB PLL 1.2V Voltage.................. - 1.20v NB Core Voltage...................... - 1.250v NB PCI-E Voltage..................... - 1.20v NB HT Voltage........................ - 1.250v Genie BIOS Settings: Spread Spectrum................ - Disabled CPU Host/HTT Clock................... - 350MHZ CPU Host/HTT Boot Up Clock.............. - 290MHZ CPU Host/HTT Adjust Gap..................... - 5 PCI-E Clock.................... - 100MHZ
Last edited by Brother Esau; 12-26-2007 at 09:38 AM.
SuperMicro X8SAX
Xeon 5620
12GB - Crucial ECC DDR3 1333
Intel 520 180GB Cherryville
Areca 1231ML ~ 2~ 250GB Seagate ES.2 ~ Raid 0 ~ 4~ Hitachi 5K3000 2TB ~ Raid 6 ~
[Reserved]......................Slot 3........................
SuperMicro X8SAX
Xeon 5620
12GB - Crucial ECC DDR3 1333
Intel 520 180GB Cherryville
Areca 1231ML ~ 2~ 250GB Seagate ES.2 ~ Raid 0 ~ 4~ Hitachi 5K3000 2TB ~ Raid 6 ~
In the past four months I've managed to Build 4 790FX MOBOs. The ASUS, Gigabyte and two DFI Models. The DFI models have died, having memory issues (GSKILL) in all built systems. DFI seems to only have a problem with it, then it would not boot on the first cold start, had to reboot, just to run it. The LED works if you have the Phoenix codes manual that lists the meaning of '88'. The other ASUS and Gigabyte 790FX boards are still running very might I add. Sorry DFI just stating the Facts.Originally Posted by Brother Esau
Posting Permissions
Reply With Quote
Bookmarks