ASUS Maximus Formula SE

[Arcanedeath]

Anyone know what page of the thread had the pic w/ the 40 or 60mm fan on a metal stand off w/ washers above the NB? I was looking back through the thread and couldn't find it.

[Talonman]

Anyone know what page of the thread had the pic w/ the 40 or 60mm fan on a metal stand off w/ washers above the NB? I was looking back through the thread and couldn't find it.

I am not sure if you are talking about a setup like this?
http://www.xtremesystems.org/forums/...=160606&page=2

Scroll to the bottom...

[Arcanedeath]

I am not sure if you are talking about a setup like this?
http://www.xtremesystems.org/forums/...=160606&page=2

Scroll to the bottom...

Nope but thats a neat build you have going there It was earlier in the thread that somone posted a picture of their board w/ a bolt replaceing one of the screws to hold down the NB heatpipe w/ a long screw and some washers along w/ wing nuts to hold up a 60 or 40 mm fan right over the fusion block area on the SE version but can't seem to find it anymore

[ninogui]

Nope but thats a neat build you have going there It was earlier in the thread that somone posted a picture of their board w/ a bolt replaceing one of the screws to hold down the NB heatpipe w/ a long screw and some washers along w/ wing nuts to hold up a 60 or 40 mm fan right over the fusion block area on the SE version but can't seem to find it anymore

Hi there guys..

Well back intha days i did my first install for maximus formula i posted this preety strightforward newbie guide on clunk the nice guy x38 victim forums:

http://www.clunk.org.uk/forums/hardw...mod-guide.html


right now i have added two more smaller fans corner tightened with plastic cable ties to be placed right on top of the ram sinks, forget the corsair ram fans, horrible quality and it will steal some of the air going into the 120 extreme cooler for the cpu.

btw it was not on a nb hole, but on the mainboard middle hole, which is located perfectly for this double mini mod.




greeets

[ninogui]

Hi there guys..

Well back intha days i did my first install for maximus formula i posted this preety strightforward newbie guide on clunk the nice guy x38 victim forums:

http://www.clunk.org.uk/forums/hardw...mod-guide.html


right now i have added two more smaller fans corner tightened with plastic cable ties to be placed right on top of the ram sinks, forget the corsair ram fans, horrible quality and it will steal some of the air going into the 120 extreme cooler for the cpu.

btw it was not on a nb hole, but on the mainboard middle hole, which is located perfectly for this double mini mod.




greeets

so after a failed vista rc1 build 6000 upgrade tryout(the nvidia vga driver gets completely screwed up, just like in aero theme the windows become transparent, and i mean transparent really, u cant access them anymore lolol) and rolling back, im posting again to wrap it up here,


here´s two pics... i used in fact one extender bolt for the nb and ram fans, both in the same. if your config is vertical top down u can just use cable ties. if its BTX mount like mine, even better, gravity will help too lolol



close up





so i managed to have no cables whatsoever running on top.

and yes, to all people complaining on bios 0903 my personal opinion is that regardless what your results are, over 400/450 fsb is in fact unstable. I guess asus wont present us with a new bios, not in christmas and probably no anymore.

I think i´ve reached the top regarding air cooling. More than 8 fans on a mobo is preety nooby....

next dream colling system after christmas: aquacomputer aquaduct 360.....


note: anybody successfully installed vista ultimate RC1 build 6000 ?? what about the clock hack, still workin..?





greets

[Grnfinger]

[QUOTE=note: anybody successfully installed vista ultimate RC1 build 6000 ?? what about the clock hack, still workin..?[/QUOTE]

Grab yourself A Dell OEM version they were on NG's 2 days ago. No troubles with activation and updates

[ElEctric_EyE]

so after a failed vista rc1 build 6000 upgrade tryout(the nvidia vga driver gets completely screwed up, just like in aero theme the windows become transparent, and i mean transparent really, u cant access them anymore lolol) and rolling back, im posting again to wrap it up here,


here´s two pics... i used in fact one extender bolt for the nb and ram fans, both in the same. if your config is vertical top down u can just use cable ties. if its BTX mount like mine, even better, gravity will help too lolol



close up





so i managed to have no cables whatsoever running on top.

and yes, to all people complaining on bios 0903 my personal opinion is that regardless what your results are, over 400/450 fsb is in fact unstable. I guess asus wont present us with a new bios, not in christmas and probably no anymore.

I think i´ve reached the top regarding air cooling. More than 8 fans on a mobo is preety nooby....

next dream colling system after christmas: aquacomputer aquaduct 360.....


note: anybody successfully installed vista ultimate RC1 build 6000 ?? what about the clock hack, still workin..?





greets

heh, wrap it up aircooler... Thx for your effort.

[DJackson]

Well I got a Non-Se Rev1.03g and I'm at 3.7ghz with my Q6600, couldn't get pass 420fsb gave me a BSOD or probably not enough voltage. Ran memtest up to 2500% coverage didn't get any errors.

[Nuckin_Futs]

here´s two pics... i used in fact one extender bolt for the nb and ram fans, both in the same. if your config is vertical top down u can just use cable ties. if its BTX mount like mine, even better, gravity will help too lolol



close up



greets

Cool, same TJ-06 I use for one of mine. Only thing to note is that the NB wll get upto 5C hotter and bout +3 on SB in that possition. I had to remove the NB/SB pipes and use aftermakeet on one and turn on side (like HTPC style) for the other to get good temps with stock coolers on mobo. I also added a clear plastic devider to keep the origional tunneled design since we cant fit the stock SilverStone model anymore. I just trimmed and fitted it from the front fan along the top edge of the VGA (using the majority of the card as the damm) to guide air toward the rear fan. The damm came completely to top of window and folowed length of cast toward back and proved to be functional, especially on model with ThermalRight NB/SB coolers and in upright BTX configuration.

Nice case.

[ninogui]

Cool, same TJ-06 I use for one of mine. Only thing to note is that the NB wll get upto 5C hotter and bout +3 on SB in that possition. I had to remove the NB/SB pipes and use aftermakeet on one and turn on side (like HTPC style) for the other to get good temps with stock coolers on mobo. I also added a clear plastic devider to keep the origional tunneled design since we cant fit the stock SilverStone model anymore. I just trimmed and fitted it from the front fan along the top edge of the VGA (using the majority of the card as the damm) to guide air toward the rear fan. The damm came completely to top of window and folowed length of cast toward back and proved to be functional, especially on model with ThermalRight NB/SB coolers and in upright BTX configuration.

Nice case.

Ok... thks nuckin... lolol btx format case can get your temp a bit higher 1-2ºc overall, but spacewise i find it much better. all components are at hand so u wont cut your fingers... i´m sure also the nb/sb/mosfet heat tubes are opposite than they should probably, but for the average low quality of fusion block compared with others is irrelevant. anyway my avg temps are on the low side, cpu idle-35 load 62/63, nb idle-37 load-45, and sb dont even care, got a fan blowing almost straight from outside. will still give a go on watering the NB fusion when i descend from air and plunge into water lolol

btw vista really improves performance with readyboost activated, pen drive formated to ntfs (specially if you can have a voyager gt at least 4GB). for all the rest.... cant find decents arguments for it (dont really care on dx10, still a long way to go)


greets