Official DFI LanParty UT X38-T2R(and LT) Discussion/Review/Overclock/Guide Thread

[zsamz_]

are you running x64? cuz im having the same problem

i'm on 32bit
gonna do fresh install

edit: everest makin pc shutdown
smart guardian reporting cpu temp 10c cooler than coretemp 0.95.4beta
so far i gotta say this board is good for first bios
board makin me feel like a n00b lol

[zsamz_]

anyone got tips for gtl numbers
anyone know what is safe for max nb and sb volts

man i gotta say this thing is solid like a rock on volts no droop what so ever
fsb vtt jumps a bith between 1.37v n 1.39 in smart guardian no biggie speedfan reporting 1.38v stable
system topped out @ 35c load chipset 34c full load @ 4.0
i did lapp the pwm heatsink wasnt 100% straight

[lazy]

anyone got tips for gtl numbers
anyone know what is safe for max nb and sb volts

man i gotta say this thing is solid like a rock on volts no droop what so ever
fsb vtt jumps a bith between 1.37v n 1.39 in smart guardian no biggie speedfan reporting 1.38v stable
system topped out @ 35c load chipset 34c full load @ 4.0
i did lapp the pwm heatsink wasnt 100% straight

have you been running any stability test yet? If you have, mind giving me your settings?

i took my board out and put my abit back in until more people with better knowledge comes along. Sort of sucked being the first with the board and having a bit trouble with it

[zsamz_]

have you been running any stability test yet? If you have, mind giving me your settings?

i took my board out and put my abit back in until more people with better knowledge comes along. Sort of sucked being the first with the board and having a bit trouble with it

yes i'm occt stable @3.92
i was on the board from 2pm to 6 am
i got to 500fsb but not stable need to go to dfi bios school let me play a bit more and i'll post my template i need to get memory bandwidth higher


brother esau i love this board gives you full control of the board
i feel like a broco buster ridin a wild horse so much fun i wont get bored
even now compared to my p35c it feels much faster more responsive
i'm only usin 1 v-card do i need both floppy connectors?

i been setting gtl according to the p35 chart but i think it should be higher
please anyone gimme some info on glt
what is max nb and sb volts i can safely apply
i went up to 1.6v on nb and was @ 34c on full load

[OnDborder]

Would it be possible to run 3 3870's in crossfire on this board?
Are there any comparisons/reviews on this mb yet? I haven't found any.
How does this stack up against the Maximus/p5e?

[kberguy1]

I just got my system back up and running, but I have a couple of questions. I ended up doing a clean install with Windows Vista Home Premium, but when I was installing drivers, I kept getting a failure from my ATI Radeon VGA driver. I tried every version I had saved, going back to 7-10, and they all cause a blue screen after a few minutes. my work around so far has been to hide the driver update and use the generic Windows VGA driver, but the problem with that is my monitor is only running at 1400 x 1050, which is not its recommended setting.

My 2nd issue is that the ITE Smart Guardian software for the X38 will not show any data; if I use the Smart Guardian software from my DFI P35 series motherboard, it seems to work ok, but I am unsure if it is accurate or not.

My final issue is with CPU-Z. I have tried version 1.43, 1.44, and even the latest 1.44.1, and they all cause my system to reboot. Note that at this time, I have only a few utilities and programs installed.

The good news is with a modest 3375 MHz OC @ 1.2750 vCore, my idle temps in Core Temp 97 are 36-31-31-36 C, and Prime 95 load temps are 48-42-42-48 C. Smart Guardian is reporting CPU=43 C, PWM=48 C, Chipset= 31 C.

My NB is now water cooled, and I am running an Enzotech SLF-1 HS/fan unit (only 1/2" tall, so I can still use two video cards) on the SB. Next time I get a chance, I will add a 60 mm fan above the PWM area, and that should eliminate any heat related stability concerns.

[Brother Esau]

i'm on 32bit
gonna do fresh install

edit: everest makin pc shutdown
smart guardian reporting cpu temp 10c cooler than coretemp 0.95.4beta
so far i gotta say this board is good for first bios
board makin me feel like a n00b lol

Is there a option in bios to calibrate the cpu temp reading up/down?

[zsamz_]

Is there a option in bios to calibrate the cpu temp reading up/down?

i been on the board 12 hours+ now brother
left my work behind
i'll try to get back to ya tomorow

edit: yes brother it has that option i put it @ +9 now
1 thing i noticed f10 dont work too good save n exit workin better