4-in-1 Motherboard Cooling :D

[STEvil]

just pull the o-ring before dumping in LN2 if you're concerned

[EnJoY]

dice should be ok, ln2 I dunno if the o ring will hold long...

LOL, if dice is not enough to cool your northbridge, I think you may be too extreme for this planet.

[Planet]

LOL, if dice is not enough to cool your northbridge, I think you may be too extreme for this planet.

It's Sham, I mean I was expecting him to build a cascade for it.

[Jort]

Littledevil used Rubber rings to seal his pots, maybe contact him Lardy

[naokaji]

LOL, if dice is not enough to cool your northbridge, I think you may be too extreme for this planet.

and in the right place if your on this forum

[Frank M]

you mean like this?

Yes, just like that!

[strange|ife]

when can we expect to see this to market shamino?

very cool work your tem has done with this design

[LardArse]

Littledevil used Rubber rings to seal his pots, maybe contact him Lardy

really?? thanks, I'l ask him for his secret!

[LardArse]

when can we expect to see this to market shamino?

very cool work your tem has done with this design

probably a month or so

[CyberDruid]

yay

[NapalmV5]

standard on x38/48 ?

[saaya]

You knew that was a joke, right?

wasnt that obvious from my post? :P

you mean like this?



dice should be ok, ln2 I dunno if the o ring will hold long...

awesome!
yeah just throw in 5 o rings per board or so
im sure a ring will last at LEAST for 1 ln2 session, it probably only gets damaged when it cools down and then heats up again once or repeatedly

[itslogz]

I want..

[jammin]

i want a underwater mars!

[Trouffman]

you mean like this?



dice should be ok, ln2 I dunno if the o ring will hold long...

xD that's exactly waht I have explain to you in my last mail

[oanvoanc]

So what do we have here is an ES:

this is one of the best ideas ever!

i hope you are able to give foxconn more ideas like that

[xlink]

hey sham, do some in depth reviews on some boards you've had some input to.
under stock air/volts
then extreme

[LardArse]

this is one of the best ideas ever!

i hope you are able to give foxconn more ideas like that

Thanks, what do you think of this in the bundle?

[metro.cl]

Sham can you make the new cooling available to be purchased apart?

What are the specs of that fan? i'd love to have a high RPM 120mm fan just for benching.

All looks really amazing

[Sampsa]

Shamino, your ideas just keep getting better. What next?

[saaya]

good idea!

[STEvil]

Sham can you make the new cooling available to be purchased apart?

What are the specs of that fan? i'd love to have a high RPM 120mm fan just for benching.

All looks really amazing

http://www.ebmpapst.us/allpdfs/6400.PDF

[Fr3ak]

Very nice idea, Peter!

But even with the latest concept, there might be some problems. For a air cooler, the heatsink is really small, so I doubt it will be good enough to cool the NB passively. Adding a fan on the second design does not seem to be that easy either, unless you use the walls around the heatsink, which will result in trapping heat inside, whch would also suck.

For watercooling, it seems to be about right, in case the water doesnt have any contact with aluminium.

Now for dry ice and LN2 there is the problem of a cracking O-ring. Even with dry ice, it will most likely crack after some time, so being abl to buy replacements is a must Another problem I see for dry ice usage: If you want to cover the while base with aceton to maximize the cooling area, then that thing will most likely be not high enough for dry ice. Without some sort of funnel, it wil be a mess

I would also prefer to get rid of the heatpipes. That way it could be sold as a seperate NB cooler for different mainboards. I am pretty sure there would be enough people that are interested in something like that for extreme cooling.

[KTE]

Very nice Sham.

Like the idea of MOSFET cooling and backplate best. Would like to have better liquid/DICE cooling for them when needed as on my P35/790FX boards it isn't the NB that heats up to burning immediately but the MOSFETs.

The idea's are nifty though and going a good way. There's always a start and this is what you get when you throw an experienced enthusiast at a big enthusiast company with $$$ to invest. All the years of needing tids and tads here and there which many of us need but groan about regular and could make things much better can now be put into reality.

Also, I can't see mention of it but are these pipes fixed or can you remove them? They look fixed but that would mean they are only made for one sort of board design?

[LardArse]

Very nice Sham.

Like the idea of MOSFET cooling and backplate best. Would like to have better liquid/DICE cooling for them when needed as on my P35/790FX boards it isn't the NB that heats up to burning immediately but the MOSFETs.

The idea's are nifty though and going a good way. There's always a start and this is what you get when you throw an experienced enthusiast at a big enthusiast company with $$$ to invest. All the years of needing tids and tads here and there which many of us need but groan about regular and could make things much better can now be put into reality.

Also, I can't see mention of it but are these pipes fixed or can you remove them? They look fixed but that would mean they are only made for one sort of board design?

Well, I've tried the screw clamp on with thermal pad heatpipe interface , didn't seem to work too well as compared to good soldered joints, an area needed to explore further