How to overclock 8800GTS 512 G92 ?

[sobol]

Hi there folks
I've got the card and I can't overclock it.
I've tried ATITOOL and Rivatuner, both detect card and I can even control fan speed. But when it comes to clock it either find it 0/0 or N/A.

Any ideas ?

[dinos22]

look at denny's thread there is a tip there how to adjust rivatuner to read the clocks properly

[sobol]

look at denny's thread there is a tip there how to adjust rivatuner to read the clocks properly

denny's who ? can you provide his exact user name so I can search for it.

[K404]

from Cri$ch:

open up rivatuner .cfg file and add

G92 = 610h-61Fh
G92 = 600h

to the nV list

(program files, rivatuner etc etc)

Denny is Guess2098

[sobol]

from Cri$ch:

open up rivatuner .cfg file and add

G92 = 610h-61Fh
G92 = 600h

to the nV list

(program files, rivatuner etc etc)

Denny is Guess2098

I've got that(G92 = 610h-61Fh and 600h) and my card is recognized.
It's just doesn't detect the clocks.

[jabski]

denny's who ?

http://www.xtremesystems.org/forums/...d.php?t=168694

[K404]

enable driver-level hardware overclocking = tick

then hit "detect now."


Are you new to Rivatuner?

[sobol]

enable driver-level hardware overclocking = tick

then hit "detect now."


Are you new to Rivatuner?

K404 thanks for help but it's obvious that I've tried that.
Thing is that when I click it and then press detect now or reboot, each time it's just going back to N/A and no clocks are shown.

[T_M]

Open vNidia control panel and then on the left hand menu there is an agreement that you have to accept before it allows asjutment of clocks.
Thats what happened for me anyway...

[K404]

It worked fine for me. Might be a Vista thing?

[bogg]

works fine for me in vista.
Using rivatuner 2.06 & 169.21

the rivatuner cfg file already had G92 = 610h-61Fh
I just needed to add G92 = 600h

working a treat now

[sobol]

Open vNidia control panel and then on the left hand menu there is an agreement that you have to accept before it allows asjutment of clocks.
Thats what happened for me anyway...

Can't see any agreement to sign. If click on NVIDIA control panel i just get the box with task menu on the left and actual options on the right.

Just to let you know I'm on Vista 64, both both programs load their drivers ok and all other features are working ok.

I even tried flashing bios from XFX card and still no luck.

[theonlybabyface]

You have to install nTune...

[sobol]

I found it for Rivatuner!

I had to tick Allow separate 2D/3D clock frequency adjustment ( that was never a case before, even with 8800GT )
Then it worked and gave me clocks.

Although it's still 0 0 for ATITOOL.

[IvanAndreevich]

Ok, so I am having the exact same problem on XP 32-bit as OP. I added "G92 = 600h" line and Rivatuner is able to recognize the card now. However, I still cannot overclock it. There is no "Test" button, although I can just "Apply" new clocks. When I do it, the clock doesn't change though.

I installed nTune but I don't see the clock control option anywhere.

[dkdeadly]

I have same problem i used rivatuner did the editing thing and got my clock frequency adjustment but when i overclock it and hit apply and then try to run 3dmark06 its just freezes i don't know why.I am using winxp and vista 64 both problems on both operating systems can someone tell me why cant i overclock it?

[IvanAndreevich]

Weird, after booting it this morning the clocks applied no problem. Stable at 800/1075