QX9650 L739A644 + Blitz Extreme

[eva2000]

pushing air through mine with delta 75cfm 120x25mm fan



one thing i learnt from scythe infinity experience is push the fan further down the heatsink so it cools the cpu socket area as well

[xgman]

Yeah i was getting around 67-70C on thermalright ultra 120 extreme @4000mhz but at 1.440v room temp around 28+ C

How is it that your 4 temps are so close and everyone elses I have seen are in sets between 5 and 12 degrees difference between cores?

[joe.denice]

yeah i am suprised as well as my temps for the first 2 cores tend to run about 3 to 4c higher then the other 2 cores.

[fadetoblack]

Coretemp 0.95.4 isn't correct Coretemp 0.95.6 beta i just started to test shows closer load/idle temps to everest OSD report in screenshots heh

Coretemp 0.95.4 is about 5C under reported from Coretemp 0.95.6 beta.

where did you get 0.95.6? all i see is 95.4 on the core temp site

[eva2000]

How is it that your 4 temps are so close and everyone elses I have seen are in sets between 5 and 12 degrees difference between cores?

depends on board and cooling i guess.. on Blitz extreme when i changed over to dtek fuzion cooling now under load core 0/1 don't move from 38C and only core 2/3 go a tad higher LOL

where did you get 0.95.6? all i see is 95.4 on the core temp site

Internal beta.. wait to next official release from author or email him for a copy of it

[oscar3d]

im using core temp beta 0.95.4. so you're saying i should keep it at this vcore with those kind of temps or try lowering it a little? btw i swapped out the tuniq and put in a TRUE and temps are a little lower, but for some reason the diff between core 0 and 3 is 10-12 degrees now. so im seeing about 55 on core 3 and 67 on core 0 sometimes.

That means my friend, that the temps you had with the Tuniq were even worse. Coretemp 0.95.6 is the real deal on temps, so to the temps you had before with the tuniq, add +5C to the temps you posted.

I'm goig on vacation, but when I come back I'm going to try the pull/push configuration o my TRUE. It is installed verically, my TRUE is also lapped and I've added a washer to make it really really tight to the mobo. (the so called "coin/washer mod")

Stay with that TRUE fade, I think Tuniq is not going to help you betterwith this chip. ATM the TRUE is the best option to run stuff on air.