[QUOTE=Nuckin_Futs;2608979]If you're using the E6750, you dont need 40 strap to get 5:6. You can get 5:6 in Auto strap or 333 maunal (under v0903, manual strap under 901/902).


This can work and I did something like this in the past for another project. This is liek a natural convection stove pipe method. If the pipes to the barbs in and out are copper, one end will heat, creating high preasure, and if the other end is outside the case (near cool floor or hanging outside cold window) the cold air will create low preasure and in turn makes a natural convection of cold air moving in to NB barbs and sucked out hot end (area heated by NB chipset). You can also try just a funneled breather into one barb, in-line w/ case intake fan, and out-take pipe towards rear fan.

This actually can work and is better with a pump/fan as I did this for my Chevy 454 with a smog pump to pump air through block since I did not need smog unit. Th cooled air from outside cooled through ported heads.

Just something to play round with and try. As for dust, not that hard to check up on it and blow out with compressed air can.



Precisely.. thats what i thought. thks for the insight!