Conroe Overclock Database

[Nazu]

I have the EIST on as it doesn't interfere with my OC'ing. Now 3.7GHz with EIST on and works like charm (atleast 1h 30m Orthos...)

[doakh]

I have the EIST on as it doesn't interfere with my OC'ing. Now 3.7GHz with EIST on and works like charm (atleast 1h 30m Orthos...)

I am at 3.6GHz (400FSB) with 1.5125v. What vCore are you using at 3.6GHz and at 3.7Ghz? My temps reach 65C with Orthos.
PCI: 101
vMEM: 2.05 G.Skill 6400 HZ (1:1) 4-4-4-12-25
vFSB: 1.40
vNB: 1.45
vSB: 1.50
vICH: Auto

[Nazu]

3.7GHz was wishful thinking Error in Orthos after 3h or so, more voltage doesn't help either. At 3.6GHz and Orthos load the vcore is 1,48v.

[KMEI]

User Name: KMEI

Stability #1: Orthos for 9 hours 7 minutes 29 seconds
Stability #2: memtest86 passes 29 times without errors (about 9h)
Stability #3: OCCT, not on screenshot, though.

CPU: Intel(R) Core 2 Duo E6600
OC: 3600 MHz
Stepping: 6 B2
Week: L639
Code: F028
vCore: 1.600V set in BIOS, 1.57V real (idle) 1.55-1.56V (load)

Cooling: Air
Cooler brand/model: Thermalright Ultra-120 eXtreme

Motherboard: Intel(R) Bad Axe 2 (Rev. 505)
Bios Version: 2770.2007.0613.1403
Operating System: XP Pro SP2 32bit

RAM brand: Corsair
RAM rated speed: PC6400
RAM actual speed: same as rated, 800.
Latency: 4-4-4-8
vDimm: 2.12V

[acme420]

http://valid.x86-secret.com/show_oc.php?id=242569

2.09 ghz

[Chri$ch]

User Name: Chri$ch
Stability: 4 hours Primestable

CPU name : E6750
OC: 4000MHz
Stepping: G0
Week: L723
Code: A445
Vcore: 1.424v Load / 1.432v Idle (Bios set 1.45v)

Cooling: Water
Cooler brand/model: Zern PQ, Black Ice GTS 360 Radiator
Motherboard: Asus P5K-E
Bios Version: 0602
Operating System: XP 32

RAM brand: GSkill F2-8500 GBHK
RAM rated speed: DDR2-1066
RAM actual speed: DDR2-1000
Latency: 4-4-4-12

[Nazu]

Finally I managed to achieve my goal:

User Name: Nazu
Stability: Orthos 14h small fft's

CPU name: E6600
OC: 3704MHz
Stepping: 6 B2
Week: L629
Code: A530
Vcore: 1.536v

Cooling: air
Cooler brand/model: Sunbeam Tuniq Tower

Motherboard: DFI P965-S Dark
Bios Version: 6.00PG
Operating System: XP 32

RAM brand: G-Skill
RAM rated speed: PC6400
RAM actual speed: 822MHz
Latency: 4-4-4-12

[extol1337]

I hope I can get 3.6+ on my L640A752 B2 chip....

[hstuehmeyer2000]

i just got a e6600 L627B, we will see how it goes

[maxwedge]

User Name: maxwedge
Stability: Orthos

CPU name: E6600
OC: 3840 mhz
Stepping: 6 B2
Week: L630
Code: B016
Vcore: 1.5425v set in bios.

Cooling: Water chiller
Cooler brand/model: Home built

Motherboard: Abit IP35-Pro
Bios Version: beta 16 B01
Operating System: XP Pro

RAM brand: Crucial
RAM rated speed: PC8500 (1066)
RAM actual speed: ddr1152
Latency: 5 5 5 17

http://valid.x86-secret.com/show_oc.php?id=252411



Working on more

[hstuehmeyer2000]

e6600@3500mhz L627B 1.35v set in bios

[Nitty]

Q6600 G0 @ 3,45GHz (383x9) v1,3675/1,37 real

[PytonOrm]

my best shoot with E6850

http://valid.x86-secret.com/show_oc.php?id=256002

cooling tuniq tower 120

[sonicsallen]

E6750 L726A922
Maximus Formula
3.8G 1.38v cooled by U120EX

[kitfit1]

User Name:kitfit1
Stability:Orthos-Blend 9hrs and 52mins

CPU name:E6600
OC:4.104ghz
Stepping:6 B2
Week:L714
Code:A245
Vcore:1.6v

Cooling:Phasechange
Cooler brand/model:Modded Mach2 GT

Motherboard:Gigabyte GA-965P-DS3/S3
Bios Version:F10
Operating System:XP 32

RAM brand:Crucial
RAM rated speed:PC8500
RAM actual speed:912
Latency:4-4-4-12

[extol1337]

so far i've orthosed a little over 4 and a half hours on my e6700 on stock cooling at 350x9 1.3v 266/667 strap no failures. went 333/667 strap and doing 1:1 orthosing right now. going to see if it passes at 8 hours (while im at work ) and if it does, im backing down the vcore to see if im still stable. load ~60C

[extol1337]

passed over 10 hours of orthos @ 350x9 1.2875v 333/667 for 1:1.

[kitfit1]

It seems obvious to me that posting in this this thread anymore is a complete waste of time. It is'nt being updated and grimreaper is not replying to pm's to do so. So why is this still a sticky ?

[aoch88]

I think there's no harm to share all the overclocking results since it's still the current family of Intel's CPU

[bleachigo]

Been out of touch lately but here are my results

User Name:bleachigo
Stability: 8 hours

CPU name :E6600
OC: 3703MHz
Stepping: 6 B2
Week: L630
Code: F103
Vcore: 1.5375

Cooling: Water
Cooler brand/model: Swiftech Apogee GT

Motherboard: Asus P5N32E SLI Plus
Bios Version: 0803
Operating System: XP 32

RAM brand: Crucial
RAM rated speed: PC8500
RAM actual speed: 1098
Latency: 5-5-5-15

http://valid.x86-secret.com/show_oc.php?id=282377[/URL]

[KumKum]

hi all

sorry for this little off-topic but im a bug in my orthos or Sp2004

"Cpu Speed" show the speed in the BIOS and not the true Speed CPU (more hight) that I modified under OS by SetFSB or even Clockgen

Where is the Problem ??


MOBO Asus P35 P5KC

OS XP moded or Server 2003 moded

Regards
bruno

[JacKz5o]

A lot of high clocks in the database

[lowtcell]

Very encouraging. I just got an E6300 for $40 to replace a Pentium D 935. Would like to see it hit 100% OC. Planning on running it at least 2.6 24/7 on air on the backup/family rig. A few final runs with the old D before it's retired and I'm all over it.

PS
My best run on the E6750 is in my sig. My RAM is holding me back

[RocKer]

I don't know why but orthos keeps crashing,but D2OL is running with out any problem now for 6 days 24/7,why o why,is orthos so bad.

My E6600 is running at 4.0ghz (9x445) @ 1:1 @ 1.450v on water link,i think thats not that bad .

[yesoos]

CPU:E6550
OC: 3,5GHz
FPO: L724 A517
Stepping: G0
Vcore: 1.344

Cooling: Air
Cooler brand/model: Noctua NH-U12P

Motherboard: EVGA nforce 650i ultra T1
Bios Version: P04
Operating System: win xp 64bit