I just installed my X-FI card yesterday, it works in the top slot , zero issues with it so far an I'm on Vista.
I did originally have the Asus card in first
I just installed my X-FI card yesterday, it works in the top slot , zero issues with it so far an I'm on Vista.
I did originally have the Asus card in first
Try using an older version (v6...) of AsusUpdate while @ stock clocks.
Workstation >>> ASUS P8P67 WS Revolution :: Intel Core i7 2600K @ 4.5GHz - 1.29v :: 16GB Corsair Vengeance 1600MHz CL8 :: ASUS GTX 580 DIRECTCU II :: Creative X-Fi Titanium HD :: 80GB Intel X25-M G2 :: 4 x 150gb Velociraptor [RAID-0] :: 1TB Western Digital Black
Laptop >>> MSI GX740 :: Intel Core i7 920XM :: 8GB Kingston HyperX CL9 :: Radeon 5870M @ 800MHz - 0.98v :: 160GB Intel X25-M G2 :: 500GB Western Digital Scorpio Black @ OBHD
I know I know, AsusUpdate sucks, but in this case, it seems to be the best solution.
Just make sure you minimise the chances of it locking or crashing by running EVERYTHING @ stock!
Owki IŽll give it a try.
I also downloaded afudos 2.11, 2.17, 2.19, 2.21 to check if any of those work.
Workstation >>> ASUS P8P67 WS Revolution :: Intel Core i7 2600K @ 4.5GHz - 1.29v :: 16GB Corsair Vengeance 1600MHz CL8 :: ASUS GTX 580 DIRECTCU II :: Creative X-Fi Titanium HD :: 80GB Intel X25-M G2 :: 4 x 150gb Velociraptor [RAID-0] :: 1TB Western Digital Black
Laptop >>> MSI GX740 :: Intel Core i7 920XM :: 8GB Kingston HyperX CL9 :: Radeon 5870M @ 800MHz - 0.98v :: 160GB Intel X25-M G2 :: 500GB Western Digital Scorpio Black @ OBHD
What settings?
I run my RAM (4x1GB - 2GB OCZ Reaper DDR2 1066 and 2GB Ballistix DDR2 1066) at 600 (DDR2 1200) 5-5-5-15-2T @ 2.25 volts no problem. Had to bump my NB volts from 1.57 to 1.62 to get it stable, but it works fine. OCCT beta is fricken awesome for testing the NB - RAM connection.
Intel i9 7900X @ 4.6GHz @ 1.126v
ASUS X299 TUF MARK 1
32GB G.Skill DDR4 2800
2x ZOTAC AMP EXTREME Core GTX1080Ti's in SLi
Loop 1: Apogee GTZ CPU block, MCR360 rad w/ Scythe fans, Micro-res, Aquaextreme 50Z pump
U2-UFO case
![]()
thanks for the info. are you noticing any performance increases with ram at 600MHz over, lets say 300-400MHZ?
[SIGPIC][/SIGPIC]
has anyone here used the software the board came with ? Is the power button on the board handy ?
The power button is very handy. If however it feels like it's not working, hold it down or put a little more pressure than you'd normally require and it'll work. I think it's like a safety feature to not knock it and power on/off.
I just tried to install AsusUpdate v6.xxxx on Vista64 but it couldnt install it.
I hate to say this but i think Im stuck with this crap bios for now![]()
Workstation >>> ASUS P8P67 WS Revolution :: Intel Core i7 2600K @ 4.5GHz - 1.29v :: 16GB Corsair Vengeance 1600MHz CL8 :: ASUS GTX 580 DIRECTCU II :: Creative X-Fi Titanium HD :: 80GB Intel X25-M G2 :: 4 x 150gb Velociraptor [RAID-0] :: 1TB Western Digital Black
Laptop >>> MSI GX740 :: Intel Core i7 920XM :: 8GB Kingston HyperX CL9 :: Radeon 5870M @ 800MHz - 0.98v :: 160GB Intel X25-M G2 :: 500GB Western Digital Scorpio Black @ OBHD
Workstation >>> ASUS P8P67 WS Revolution :: Intel Core i7 2600K @ 4.5GHz - 1.29v :: 16GB Corsair Vengeance 1600MHz CL8 :: ASUS GTX 580 DIRECTCU II :: Creative X-Fi Titanium HD :: 80GB Intel X25-M G2 :: 4 x 150gb Velociraptor [RAID-0] :: 1TB Western Digital Black
Laptop >>> MSI GX740 :: Intel Core i7 920XM :: 8GB Kingston HyperX CL9 :: Radeon 5870M @ 800MHz - 0.98v :: 160GB Intel X25-M G2 :: 500GB Western Digital Scorpio Black @ OBHD
![]()
![]()
![]()
Despite me ranting that my Prelude is working fine in the top PCI slot, this has happened while I have been out at work today. I have no clue to why or how but its now not working. I haven't done anything different!
WTF!!!!!!
Mobo: Asus Maximus Formula SE (0802 Bios - Air Cooled using Thermalright HR-05 IFX coolers on NB & SB)
Proc: Intel C2Q Q9550 2.83ghz FSB1333 12mb (o/c to 3.41ghz 8.5x 400fsb) with Thermalright Ultra 120 eXtreme cooler
Mem: Kingston Hyper-X 2gb(2x1gb) 1066mhz 5-5-5-15 (KHX8500D2K2/2G)
VGA: XFX 8800GTS 640mb
PSU: Antec Neo HE 650w Blue
Case: Antec P182SE with 4x 120mm fans
Sound: Auzentech X-Fi Prelude (in PCI slot above graphics card)
Drives: Intel X25-M 80gb SSD - 36gb WD Raptor - 320mb Seagate SATA-II - 320gb Hitachi in an Antec MX-1 ESATA Caddy - Sony SATA DVD-RW
Op Sys: Win XP Pro
Display: Benq 24" Q24WS
Controls: Logitech G15 Keyboard and MX1100R Mouse
Printer: Epson R800
ISP: Be Value 12mb ADSL (England)
I found this link for the flash archive:
ftp://ftp.asus.com.tw/pub/ASUS/mb/flash/
Workstation >>> ASUS P8P67 WS Revolution :: Intel Core i7 2600K @ 4.5GHz - 1.29v :: 16GB Corsair Vengeance 1600MHz CL8 :: ASUS GTX 580 DIRECTCU II :: Creative X-Fi Titanium HD :: 80GB Intel X25-M G2 :: 4 x 150gb Velociraptor [RAID-0] :: 1TB Western Digital Black
Laptop >>> MSI GX740 :: Intel Core i7 920XM :: 8GB Kingston HyperX CL9 :: Radeon 5870M @ 800MHz - 0.98v :: 160GB Intel X25-M G2 :: 500GB Western Digital Scorpio Black @ OBHD
I can up it to fileshare or something or I can load it on my ftp
Is it a bios setting or what are you guys doing different to get sound card working in top slot ?
i didn't install the asus sound card, so do i have to disable anything apart from onboard sound in bios ?
Intel i9 7900X @ 4.6GHz @ 1.126v
ASUS X299 TUF MARK 1
32GB G.Skill DDR4 2800
2x ZOTAC AMP EXTREME Core GTX1080Ti's in SLi
Loop 1: Apogee GTZ CPU block, MCR360 rad w/ Scythe fans, Micro-res, Aquaextreme 50Z pump
U2-UFO case
![]()
I'm behind a router so enable /disable pasv
Last edited by Grnfinger; 11-29-2007 at 05:09 PM.
Here is a link to Asus Update 6.0 Beta
http://fileho.com/download/2aee33301...sUpdt.rar.html
Bookmarks