Hey guys,

a few days ago i bought a striker extreme again, but i'm disappointed again. First i installed all water cooling components on the Board, put 2 x 2 GB G.Skill ddr2-1000 on it an did the 2 8800gtx into the slots. The Board was delivered with 1305 Bios. I've read a lot of bad thing about the Bios, so i decided to flash the 1303 Bios. everything worked fine but noch FSB 1600 stable with my q6600 g0. Also i had a lot of problems with the Razer-Bug. So i flashed 1301 but now nothing is fine. the max stable speed ist fsb 1400. Thats a lil crappy i think.


I used these settings, but if i want to boot with a higher fsb the screen keeps black...anyone got ideas?

Code:
AI Tuning: Manual
Nvidia GPU Ex: Disabled
LinkBoost: Disabled
CPU Multi 9
FSB - Memory Clock Mode: Unlinked
x FSB - Memory Raio: N/A
FSB (QDR), Mhz: 1400
Actual FSB (QDR), Mhz: 1400
MEM (DDR), Mhz: 900
Actual MEM (DDR), Mhz: 900
Vcore Voltage:1.50 for actual of 1.40
Memory Voltage:2.15
1.2v HT Voltage:1.7
NB Core Voltage:1.5
SB Core Voltage:1.65
CPU VTT Voltage:1.4
DDRII Controller Ref Voltage: auto
DDRII Channel A Ref Voltage: auto
DDRII Channel B Ref Voltage: auto

tCL (CAS Latency): 5
tRCD: 5
tRP: 5
tRAS:18
Command Per Clock (CMD): 2


Advance Memory Settings
tRRD: AUTO
tRC: AUTO
tWR: AUTO
tWTR: AUTO
tREF: AUTO
tRD: AUTO
tRFC: AUTO
Async Latency: AUTO

CPU Spread Spectrum: Disabled
PCIE Spread Spectrum: Disabled
MCP PCIE Spread Spectrum: Disabled
SATA Spread Spectrum: Disabled
LDT Spread Spectrum: Disabled

CPU Internal Thermal Control: Disabled
Limit CPUID MaxVal: Disabled
Enhanced C1 (C1E): Disabled
Execute Disable Bit: Disabled
Virtualization Technology: Disabled
Enhanced Intel Speedstep Tech: Disabled
LDT Frequency: 5x

PCIEX16_1 Frequency (Mhz): 100
PCIEX16_2 Frequency (Mhz): 100
PCIEX16_3 Frequency (Mhz): 100
SPP<->MCP Ref Clock, Mhz: 200