Quote Originally Posted by BadNizze View Post
Congratz on that WR Lightman, I will be hunting you next week when I get my X4...

Did a quick bench run tonight, SuperPI 1mb only. All tests done on air inside at roomtemp. Ambient 20C. 2*92 Zalman fan over memory, thatīs all!

Everest


And my personal best SuperPi time! Very happy for this!
Thanks BadNizze!!

Regarding your memory setup I'm speechless

Quote Originally Posted by mAJORD View Post
Yeah Aussie, thanks for the link. I had a looksie. IT seems they were OCing a 2.4ghz (12 multi), and were using overdrive, which doesn't work on the giga.

I've tried F2H now just not i, will give that a shot!

2.7 (2.67) is good, it's nice and stable, similar results to the guy using the M2N-SLI.
mAJORD today I made overdrive to work on my Giga !

I was wondering why we can't adjust voltages from this utility and then I decided to give it a go with BIOS setting to Auto!
Easy! Now all sliders are working from Windows and I can change everything except vMEM and PCIe .

Only problem was with memory voltage, because default 1.8V is no good for high clocks...
Luckily my memory has EPP profile defaulted to 2.2V so I enabled it and still can push memory to 1000MHz area with 4-4-4 timings! Seet !

Hope this will help..

BTW I tested my CPU further on this board and 3450MHz is 100% stable at 1.375V!!