Update! November 24-07

All right ppls! I did quite a lot of job recently and still, i need to do some more this week-end as I'm off and i received my second MCW30 for my SB!

I'll let the pics talk by themself!

So i wanted to test that new QX6800ES on my P5B Deluxe before i hook it under watercooling just to make sure that all was working fine with it since it was acting extremely weird when i had hooked it under water on my EVGA 680I A1. So i began to work on building my second rig on my Bench table!

Working on doing my little Back-plate (Again) for my Tuniq Tower.




P5B Deluxe being prepared (With QX6800ES G0 hooked).


Pretty much one of the best looking i did


Almost completed!


Completed! (Ram remaining of be taken from my main rig. Now will have 2GB in each comp instead of 4GB for main comp. Might buy a cheap 2GB kit for that second rig tho.


Stuff that arrived yesterday


All right so here is a quick result for that QX6800ES G0 on my Bench table with the Tuniq and P5B deluxe.


(That's 3.4Ghz with 1.320v and temps are 70c\70c\63c\63c. Stable over 8hours of Prime95. Ram running @ 425Mhz 5-5-5-15 2T 2.0v)

Not bad @ all but look @ the temps! Thats on air tho. And I might be able to do higher with 1.320v! I basically just set that voltage and bumped the FSB.

Now, just an hour ago, i hooked that QX6800ES in my main rig under H20 All powered fine and no auto shut down like it used to do last week.

Here are the IDLE temps


Pretty much a good difference over the Tuniq I was getting 45c IDLE with the Tuniq.

All right so i have my whole week end off and i received my stuff from NCIX.com! One day of shipping Pretty Darn fast eh! I'm ready to rebuilt my CPU\NB\SB loop from scratch!

Will post Update as more work is completed! Keep an eye on the thread guys! One of the best looking rig is to be completed soon!