ASUS Maximus Formula SE

[Warboy]

Warboy, try out the Anandtech settings and see how that does? I know they're for a much higher clock but it might be worth it? i'll post my settings for you when i get home from work, we'll get this problem solved!

Well, I think my memory is dying because once I lowered the AI Booster and the other memory based settings, the system became stable, Idk if its the memory controller on the X38 or my memory.

but anyways, I almost got 4ghz stable.

Hi, err no, I've told the bios to use it as my primary, vista doesn't care it seems..
Chris

PS. Your obviously not getting what I'm saying, So re-read, and re-read some more, before trying to make a argument.

[cuke2u]

Well, I think my memory is dying because once I lowered the AI Booster and the other memory based settings, the system became stable, Idk if its the memory controller on the X38 or my memory.

but anyways, I almost got 4ghz stable.



PS. Your obviously not getting what I'm saying, So re-read, and re-read some more, before trying to make a argument.

Hi, sorry but I wasn't 'trying to make an arguement' don't be so testy. I was merely adding to the debate, friends now?
Chris

[Warboy]

Hi, sorry but I wasn't 'trying to make an arguement' don't be so testy. I was merely adding to the debate, friends now?
Chris

Well, I'm not getting hasty, anyways, Its not a debate when I've already won :P

[cuke2u]

Well, I'm not getting hasty, anyways, Its not a debate when I've already won :P

Oh jeez....
Chris

[pushook]

anyone stable with 430x9 with a Q6600?

I use these settings:
get stable only 20min /OCCT

Vcore=1.45
FSBT=1.65
NB=1.68
SB2=1.65
SB=1.10
DRAM=2.2

all other settings (auto)

maybe anyone has a suggest

[geof]

anyone stable with 430x9 with a Q6600?

I use these settings:
get stable only 20min /OCCT

Vcore=1.45
FSBT=1.65
NB=1.68
SB2=1.65
SB=1.10
DRAM=2.2

all other settings (auto)

maybe anyone has a suggest

push your vcore

[Warboy]

anyone stable with 430x9 with a Q6600?

I use these settings:
get stable only 20min /OCCT

Vcore=1.45
FSBT=1.65
NB=1.68
SB2=1.65
SB=1.10
DRAM=2.2

all other settings (auto)

maybe anyone has a suggest

I was a week ago, but I've been so many problems lately, I think these board hates my Cheap 680W power supply, So I'm waiting till I get my Antec 850W back from RMA to see if its that, If its not, then either the memory controller on the X38 is dying or my Memory is dying, I can't say for sure right now.

[Bigchrome]

anyone stable with 430x9 with a Q6600?

I use these settings:
get stable only 20min /OCCT

Vcore=1.45
FSBT=1.65
NB=1.68
SB2=1.65
SB=1.10
DRAM=2.2

all other settings (auto)

maybe anyone has a suggest

Lower NB and FSB and increase vcore would be my first idea..

[ninogui]

deleted - reposted down below

[pushook]

Lower NB and FSB and increase vcore would be my first idea..

thx, ok i testet with these settings:

Vcore=1.45 raised up to 1.52vcore step by step

raising vcore on my system ends in early reboots

whats with CPU PLL in the bios?

FSBT=1.50
NB=1.50
SB2=1.55
SB=1.10
DRAM=2.2