ASUS Maximus Formula SE

[TheSamurai]

How would we test the speeds? I have 2x 36gb raptors set up now in RAID0. Tell me what to do and i'll test it now??

Edit: Just found a prog called DiskBench. To copy a Copy an avi file:

Size: 727961600
Time: 13797 ms
Transfer Rate: 50.318 MB/s

Hows that?

using hd tach i got 6.1 ms

I have my raid setup with 2 74 gb raptors and all is well. But I have a 500gb seagate that I can see in the bios and it was shown in the Intel matrix storage manager, but I cannot see it in explorer. Also is anyone having any problems with utilities that came on the Asus CD and Vista 64. I loaded the utilities and started to experience look-ups when I went on the internet and had to delete them. I have updated my bios to 802. Thanks for the help.

read quote below.

For your Seagate drive, have you been to the following:

Right Click 'My Computer' and click 'Manage'
Under the Storage tree you should see 'Disk management'
You should see a list of drives. You may need to Enable the Seagate drive or Activate it.

So you want to bench your array.

hdtach is better than hdtune.

6.1 ms here!! working great!

I'm trying to install the matrix storage manager from windows on my X38 board and I get an error message saying my system doesn't meet the minimum requirements..

Upon further investigation, the current chipset identification utility doesn't work.

Any ideas??

Has anyone tried to use the chipset identification utility on X38??

you're trying to install the console. you need to switch it over to raid in bios, setup the raid config, load the drivers before you start windows, install windows, then install that console. read the manual and you should get an idea of what you need to do. there are newer drivers out at intel. use those.