DDR2: 650MHz club

[siyah]

asus p5b deluxe wifi with kingston hyper X pc9600@1300mhz 2,4V

[K404]

SPi 1M @ 675.3MHz:



SPi 32M @ 652.7MHz:



2.47/2.52V

More to think i hope

RAM is Crucial Ballistix PC5300 3-3-3

[siyah]

E6600@3,825 with supertalent@637mhz @2,4V
cpu=FSB 425x9 with air

[Zeus]

637 is not enough for 650 club.

Now get clocking and report back when you've reached 650!

[uneverno]

637 is not enough for 650 club.

Now get clocking and report back when you've reached 650!

Also, the front page hasn't been updated since August.

[The0men]

Well I thought I would resurrect this old thread hey!

This is without any tweaking or messing around, I did use 2.5v, but I'm pretty sure I can get more out of these for my 2.5volts worth. I didn't bother tightening timings, or squeezing mhz, maybe when I've got some time I will.

Was using OCZ 8500 D9GMH

Timings for any one interested are:

CAS - 5
tRCD - 5
tRP - 5
tRAS - 15
tRC - 22
tRFC - 50
CR - 2t
tRRD - 8
tWR - 6
tWTR - 10
Tref - AUTO
TRD - AUTO

Screen

[Mauri Antero]

4x 1Gt aXeRam 650Mhz 5-5-5-15 with maximus formula

[emoners]

some minor voltage bump...

Team Xtreem 652.9 MHz 5-5-4-12 @2.19v (in bios, though Windows sees it at as 2.12v)


http://valid.x86-secret.com/show_oc.php?id=280375

[Cupcake]

Crucial Ballistix PC5300 3CL

This is just the beginning also

[EXPANDER]

mushkin 2x 512 mb ddr2 800mhz 1.8 v default 4-4-3-10

overclock: 2x 512 mb 2.4 volt 5-5-5-15 - 660.4 mhz
validate: http://valid.x86-secret.com/show_oc?id=209958

[M3kk]

Crucial ballistix PC8500

[Zeus]

The startpost could use some updating. :p

It would be nice to mention what ram was used as well, i bet 75% will be Crucial.

[The0men]

LOL well at least I have some OCZ kicking, and I still think I can get close to 700 if I could be bothered setting a devider so I could ramp it up slowly. But might need more volts.

Yer front page update would be sweet.

[hixie]

Better add in my Transcend. 660 5-5-5-15 @ 2.5V on Gigabyte DS3R
Could go higher but board only allows 2.5V max

[Cupcake]

yeah my boards max is the same

[eva2000]

Highest and tightest super pi 32M passable memory clocks I've done to date thanks to DFI LP LT X38-T2R motherboard!

[eva2000]

2x1GB Crucial Ballistix PC2-8500 Tracer @675Mhz 5-5-5-9 at 2.55v

New personal best 32M passable clocks of 675Mhz 5-5-5-9 at 2.55v!



Click image for larger version below

Super Pi 1M



Super Pi 32M

[eva2000]

2x1GB Crucial Ballistix PC2-8500 Tracer @681.5Mhz 5-5-5-9 at 2.60v

Bumped up vdimm and 32M @681.5Mhz 5-5-5-9 at 2.60v !



Super Pi 32M

[The0men]

hmm i might wait for a rainy day (its summer here and always hot) and when its cool enough I might try for 700, I can get over 650 on 2.5v so 2.6 should get me close anyways. If they go poooof then so be it lol.

[k1dd5]

I wish I was still at sydney or melborne

I got this suicide clock with 2.55v, but currently it's only single channel as the other "half" is borrowed by my friend to finish his mainboard review..

just post this suicide first, will get back with the PI after I got back my other half.



it's still can do the Pi at 680 for the single, but I don't know if I have 2 sticks running.

anyway, this is the pi at 672 but still on single, got to wait for another pair

[mup0]

2.5v Super Tallent CL4

[Saturas]

Here my OCZ Sli Ready Edition 1066 @ 2.4V



CPU was not highly overclocked for this test


Edit:

Made today again some testing with 2.55V and SingleChannel :

High-FSB:


And low-FSB cause CPU was at it's end:

[Jungle beat]

Cellshock pc9200 @ 2,7v



Maybe ... i had to try 32m

[M3kk]

What mobo?

[Jungle beat]

Maximus Formula