**Official ABIT IP-35 Pro Review/Overclock/Guide Thread**

[Ace-a-Rue]

Hi guys.

2 problems here. (Q6600 and bios-14)

1. abit-guru utility don't show anything at all (latest version). All readings are zeros.

2. Coretemp 0.95.4 read only core 0, and coretemp 0.95 crashes the system.

clear cmos and then go into bios and set "defaults"...save and re-post back into bios...reset your individual settings and then save...Uguru should work after that.

use only coretemp 0.95.4.

[kapster]

still waiting patiently for an official ip35-E version 13 bios.

[RAdoxx]

Hi mate,

did you solve your PIO trouble ?

I just got same issue with my system HDD ( got 5mo/s in HDtune insteed of the 55mo/s ???) I was in PIO mode and can't change the setting in windows or in bios .

After checking google I found the way to reactivate the UDMA mode :

GO in regedit and look after these key:

HKEY_LOCAL_MACHINESYSTEM/CurrentControlSet/Control/Class{4D36E96A-E325-11CE-BFC1-08002BE10318}�00x

the ?00x is your supposed number for your PIO drive

when you found it , deleted it ( save it first if you want) and reboot, now all should be fine.

My first attempt was wrong drive number but at the second one I got success. I had to reinstall my intel chipset driver by the way.

In my case I have had to deleted the n°0002 , here is a picture of it:



Now, all seems to be fine.

Hope it solve your trouble too.

Good to know, but I already did a low format on both drives, going to reinstall windows today.

[snips]

clear cmos and then go into bios and set "defaults"...save and re-post back into bios...reset your individual settings and then save...Uguru should work after that.

use only coretemp 0.95.4.

No, that didnt work! UGURU is still showing nothing!

[Heidfirst]

still waiting patiently for an official ip35-E version 13 bios.

you've missed it - it's been up, had some RAM problems & they are on 14 beta atm.

[Ace-a-Rue]

No, that didnt work! UGURU is still showing nothing!

which uguru version are you using?...try uninstall, reboot, re-install of uguru.

[TheGoat Eater]

it seems as though one of my cores is disabled - in wprime it only shows 1 core and one thread and super pi takes a lot longer - where do I fix this?
HELPPPPP!!!!

[003]

you've missed it - it's been up, had some RAM problems & they are on 14 beta atm.

Where can you get the absolute latest BIOS updates for the IP35-E, betas included? I can't seem to find a consistent source, even the official abit site(s).

EDIT:
BTW My C2D works perfectly, both cores detected by BIOS and in windows.

[TheGoat Eater]

could it be possible that a core died? as aqua mark and other benchies don't seem that good (as they were)

like this

[The Iceman!!]

so, what's proving to be better for quads and o/c...the ip-35 pro or the p5k premium?

[Ace-a-Rue]

Where can you get the absolute latest BIOS updates for the IP35-E, betas included? I can't seem to find a consistent source, even the official abit site(s).

EDIT:
BTW My C2D works perfectly, both cores detected by BIOS and in windows.

here is the folder to download bios 13 for the IP35 and IP35-E.

it appears this is the newest release...Abit's USA website still shows bios 12 as the latest....always a good idea to go to the FTP site to check...their website is the last thing to get updated.

ftp://ftp.abit.com.tw/pub/download/bios/ip35/

[Ace-a-Rue]

could it be possible that a core died? as aqua mark and other benchies don't seem that good (as they were)

like this

i don't think you would show 2 cores, 2 threads in CpuZ if one core was dead...usually, lower bench scores mean a run down OS or video driver problem.

[SaII]

hey guys could someone tell me what is the most current revision of the board?

[Ace-a-Rue]

so, what's proving to be better for quads and o/c...the ip-35 pro or the p5k premium?

LOL...when you come into the lion's den you want to act like a lion.

kidding aside, the Pro is an excellent board receiving the "Gold" award from Anandtech website.

[Ace-a-Rue]

hey guy's could someone tell me what is the most current revision of the board?

i think there is 1.0 and 1.1 versions...minor changes between the two.

[The Iceman!!]

LOL...when you come into the lion's den you want to act like a lion.

kidding aside, the Pro is an excellent board receiving the "Gold" award from Anandtech website.

RAWR!! that better?
thanks!

[Pntgrd]

Has anyone else had trouble with the onboard network adapters? I had one die a couple of weeks ago and after a reboot tonight the other one just didn't come back on. Lucky I had a PCI card in a drawer to put in, I guess.

[Ace-a-Rue]

RAWR!! that better?
thanks!

YES!

[Ace-a-Rue]

Has anyone else had trouble with the onboard network adapters? I had one die a couple of weeks ago and after a reboot tonight the other one just didn't come back on. Lucky I had a PCI card in a drawer to put in, I guess.

what bios are you using?

have you cleared CMOS with the battery out?

[Pntgrd]

what bios are you using?

have you cleared CMOS with the battery out?

Using bios11 at the moment but have been thinking of flashing up to 14. Funny thing is Vista shows both adapters as working properly but they lose all connectivity with my router. You think this could be a bios problem?

[Ace-a-Rue]

possibly!

another thing to consider is either vista or your router.

[alpha0ne]

I'm yet to have ANY problems with my board (touch wood) and using the latest 16. bios and I bought one of the very first in AU

[Pntgrd]

possibly!

another thing to consider is either vista or your router.

I thought about it being Vista so tried booting XP instead but same thing. Router works fine with the DLink pci card and my laptop so I doubt it is that. I will try the bios update and reset tonight to see what happens.

[Ace-a-Rue]

I thought about it being Vista so tried booting XP instead but same thing. Router works fine with the DLink pci card and my laptop so I doubt it is that. I will try the bios update and reset tonight to see what happens.

i heard guys reporting the same problem with the onboard NIC controllers and it came down to getting the latest driver...once installed, it worked fine....it is very rare to have both go tits-up

[Ace-a-Rue]

I'm yet to have ANY problems with my board (touch wood) and using the latest 16. bios and I bought one of the very first in AU

same here for me...been a great board up to now with the 16 beta bios...i had NIC controllers dropping off line but that was caused by a malfunctioning wireless "G" router...since replacing the controller, i have no problems.