Im running a similar build using a L726A on water with the same Team Xtreme currently at 684 2:3 on a 266 strap and the bandwidth is nice at 4100mhz, around 9300. Quad is at 456x9 at 1.65v. This board is very easy to play with indeed.![]()
Im running a similar build using a L726A on water with the same Team Xtreme currently at 684 2:3 on a 266 strap and the bandwidth is nice at 4100mhz, around 9300. Quad is at 456x9 at 1.65v. This board is very easy to play with indeed.![]()
Q9650 @ 4Ghz - 1.216v
E8600 @ 4500Ghz - 1.34v - Q822A435
Q6600 @ 4014Ghz & E2160 @ 3.6Ghz
Silverstone Zeus 850w, Maximum formula,
Custom Water Cooling, 4GB OCZ 9200 Flex II,
Xfire 4850's 800/1150, 3D Mark 06 , Vantage,
Frontlineforce
I have done Prime95 small FFT but not at 4G only 3800 and it did that without issue for over 8 hours, I never went any further with Prime as of yet.
It is not limited by MB, it will reboot rather than giving you a error message when CPU is unstable, I tested for many Core2duo or Core2quad with many different MBs, having such symptom.
It is one of the best MB for Quad I have ever used, some MBs even can't boot at 460FSB or above with the same quadcore CPU.![]()
CPU: XEON W3540 & Gulftown Q3FE
MB: Asus Rampage III Extreme
RAM: Corsair GT2000C7 2G X 3 ADATA XPG+ 2200+ 2G X 3
SSD: Adata S596 120G
Display Card: Asus EAH 5870
WaterCooling:
Laing D5 Pump + Koolance D5 Top
Radiator: KP 120.3
CPU Block: HeatKiller 3.0 + EK full MB Block
PSU: Antec TPQ 1200W OC
Case: SilverStone TJ-07BW
Q9650 @ 4Ghz - 1.216v
E8600 @ 4500Ghz - 1.34v - Q822A435
Q6600 @ 4014Ghz & E2160 @ 3.6Ghz
Silverstone Zeus 850w, Maximum formula,
Custom Water Cooling, 4GB OCZ 9200 Flex II,
Xfire 4850's 800/1150, 3D Mark 06 , Vantage,
Frontlineforce
Bookmarks