Quote Originally Posted by wyemarn View Post
I'm using Scythe Ninja for Cooler. At 1.4V, core temp never gets over 60C. Actually my Scythe is a Topower built. My 12V rails never gets below 12V during load and Conroe doesnt take up much power so I think my PSU is ok. I've power usage tester and during load my rig takes up around 200W so I guess my PSU should be good enough for it. Well I'm not really lucky in getting good CPU but I have to agree to that my PSU is not very good.
Quote Originally Posted by ferjero989 View Post
yeah same thing here... i cant go any higher than 2.8ghz (350mz fsb) and i really wanna get 3.2ghz outa this cpu... so badly. my computer wont even post if u put something higher than 1300fsb. i have cheap "Team" DDR2 800mhz and i want to keep the memory running at that same speed to achieve a 1:1 cpu-mem relation.
so.. in the previus page ya can see my bios settings.. what can i do to get 3.2ghz outta this? at least to make it post -_-

i havent tested this yet, but this is the most i can get...
again i have a msi p6n sli (nforce 650 chipset) and 1 stick of Team Value ddr2 800mhz.
cpu-z
both of you guys, i would try playing around with chipset voltages. i wanted 3.2ghz too but settled for 3ghz