Ive been everywhere but could only find a GF4 GPU block at DangerDen and highspeedpc.com..... are there any others out there??
Ive been everywhere but could only find a GF4 GPU block at DangerDen and highspeedpc.com..... are there any others out there??
I believe there is a Z4 alumina block with red&blue fittings that has good performance
Life goes by quickly--so should your stationwagon
OPP just did a review of this one. Link
Thats a good block, thats what I use, but I modded mine to accept 1/2" barbsOriginally posted by Hardass
OPP just did a review of this one. Link
(I only had one brass barb at the time but I got another one and swapped out the polypropalene one)
P4 3.2
P4C800-E
Xtreme Tek Werkz Typhoon waterblock
Maze4 GPU Waterblock
Mcx159-P w/10,500rpm counter-rotating 50mm JMC fan
Mushin BH-5 Promo build 2-2-2
9800 pro with silversink ramsinks
WD Raptors
My Heatware
If you decide to mod your Swifty GPU block, heres a tip
Find a 1/2" brass barb that has a 45* angle, this will allow ramsinks to be used easier. I had to use Low profile ramsinks, but as soon as I get some 45* angled brass barbs, I will be using my traditional Silversink ramsinks
P4 3.2
P4C800-E
Xtreme Tek Werkz Typhoon waterblock
Maze4 GPU Waterblock
Mcx159-P w/10,500rpm counter-rotating 50mm JMC fan
Mushin BH-5 Promo build 2-2-2
9800 pro with silversink ramsinks
WD Raptors
My Heatware
OC Hideout is another safe place to buy GF4 waterblocks.
Using a DangerDen Maze1 Slot waterblock is also a good option for GPU cooling.
Dinosaurs are chortling.
Lian Li PC1200B, Custom Water Cooling, Lamptron FC5 Fan Controller w/ 4x 120mmx38 Deltas
i7 930 @ 3.8ghz, Rampage III Extreme, 12GB G.Skill PC2000, BFG 260GTXOC, PNY Quadro 380FX
(1) HP LP2475w 24", (2) Dell 2007WFP 20", Corsair AX1200 1200w, 3Ware 9650SE Raid
(2) 500gb Hybrid Seagate Raid 1, (2) 2TB WD Red NAS 64mb Raid 1, (5) 1TB Hitachi 32mb Raid 5
Posting Permissions
Reply With Quote
Bookmarks