well,a bit better with my eVGA..stock cooler on.1st GT on the bot....
http://service.futuremark.com/compare?3dm06=3660913
![]()
well,a bit better with my eVGA..stock cooler on.1st GT on the bot....
http://service.futuremark.com/compare?3dm06=3660913
![]()
[SIGPIC][/SIGPIC]
Do any of u guys own a asus branded 8800gt?I've just ordered 1 of these it is @ stock specs and the only 1 i have managed to get and within minutes it was out of stock. i want to know the max overclock for this card in specific. i could not hold out any longer and opted for a 299US card @ newegg that was plain stock...
u guys can beat me later, but let me know if i still have a potential card on my hands.
![]()
Crymera
Intel Quad Core Q6600 @3Ghz /artic silver ceramic, Zalman9700NT, MSI P6N Diamond mobo, Corsair XMS 4Gb Kit PC6400 @1066, 150Gb Raptor, 500Gb PR Hitachi, Pioneer 122D, Samsung SH-S183L, TT TP 700W Modular, TT Armor +25cm fan, Dell SP2008WFP LCD Monitor!
Vista Ultimate 64-bit/XP 32-bit![]()
CRYSIS READY!!
i put the MCW60 block on the card today with MC14s on mem chips - Vregulators..
so far...the card needs power...definetely needs a Vmod..
[SIGPIC][/SIGPIC]
what's stock voltage on these cards? it's great to see high temps were still due to garbage stock heatsinks. looks like lots of potential left if voltage isn't near the limit yet. maybe it's time to give up the 7900gs soon. been a fantastic card
E8400 8x500=4000 | ABIT IP35-E
2x2GB Tracer PC2-6400 1:1 500MHz 5-5-5-15 2.0V
Galaxy 8800GT 800/2000/1100 1.3V | 80GB X25-M G2 + 1.5TB 7200.11 | XFiXG
Fuzion | MCW60 | DDC2+Petra | Coolrad22T+BIP1
Merom 13x133=1733 1MB L2 0.950V
nibitor says 1.1Vgpu i think...imagine what the card will do with 1.3-1.4V..............
[SIGPIC][/SIGPIC]
question about ATI tool. Does it mater when it says "no errors fo xx seconds" or should I visually check for errors?
GD. I need a quad core. I'm getting 11800 in 3D mark with my 8800gt at 720/1015/1782. Is there somehing wrong or does quadcore make that much of a difference?
Last edited by iadstudio; 11-07-2007 at 03:18 PM.
att is usually a good indication although i've definitely had times when it'd be artifacting but att wouldn't pick it up. mind you this was with a 7900gs and not a 8800gt.
E8400 8x500=4000 | ABIT IP35-E
2x2GB Tracer PC2-6400 1:1 500MHz 5-5-5-15 2.0V
Galaxy 8800GT 800/2000/1100 1.3V | 80GB X25-M G2 + 1.5TB 7200.11 | XFiXG
Fuzion | MCW60 | DDC2+Petra | Coolrad22T+BIP1
Merom 13x133=1733 1MB L2 0.950V
This is the best I can do stable. Performance is barely increased from an OC up to XFX's XXX speeds 670/975. Sounds like voltage is the issue. Is it even worth waterCooling this card if you're not going to Vmod it?
Last edited by iadstudio; 11-07-2007 at 07:43 PM.
Last edited by r4st4m4n; 11-08-2007 at 07:17 AM.
Q6600@3.6 GHz / GA-X48-DQ6
2x2GB Kingston HyperX DDR2-800
Asus HD 5870
Corsair TX-850
WD Velociraptor 150GB / WD Green power 500GB
Water Cooling: EK res 250 > Swiftec MCP655 > Swiftec MCR320 > EK-FC5870 > HeatKiller 3.0 LT
Unmodded![]()
...Q6600 @ 4005mhz...
http://service.futuremark.com/compare?3dm06=3686558
[SIGPIC][/SIGPIC]
q6600 3.2 4*1024 900 cl5
8800gt stock-12500(on gtx stock was 12300)
700*1750*2000 - 13800
ill get q6600 to 3500 memory to 1100 and 8800gt on water....
Core i5 2600k 4.7 1.375v Ek supreme hf
2*4096 corsairs 2000mhz 1.55v
P8p67 pro
Ocz vertex 2 64gb
Samsung 2tb f4 (dual sillent hd)
Seasonic x-750
Lg 47ld4500 47" s-ips 5ms
Gaiward phantom gtx 570(ek vga supreme hf)
Ddc 10w
Watercool mora 3 1080 rad
Phobya 150mm res
I forgot where I read it, either firingsquad or THG, but "All early 8800GTs are manufactured by Nvidia for their board partners, this includes the factory overclocked versions."
So brand doesn't matter with regard to OC, they are all off the same line except for the sticker, or in some cases the modified cooling (Palit?).
Also it's probably worth mentioning that my plain 8800GT from EVGA was actually factory OC'd to the Superclocked speeds (650/950). I was able to further bump it to 675/975 without artifacts in ATITool and with custom fan thresholds in RivaTuner. There is a great guide for how to do this btw, just Google it. My card doesn't exceed 73* under load with 60% fan.
Core 2 Duo E6300 @2.8GHz(400x7)1.31v Gigabyte GA-965P-DS3 rev. 2.0 Thermaltake TMG i1 2GB Geil DDR2-800 (4-4-4-12) @1.8vEVGA 8800GT @ 675/1687/1950 Thermaltake Toughpower Cable Management 750W PSU
"Fool me once, shame on, shame on you. Fool me...can't get fooled again."
I just ran a bunch of tests with the Far cry benchmark (1280x1024, shader 3.0, ultra details, 16x antrio, 8x antialiasing (x3210 3520mhz, 1100 memory, gigabyte P35C
753-1955-1021
Score = 117.67 FPS (Run 1)
Score = 120.83 FPS (Run 2)
Average score = 119.25 FPS
650-1688-950 (default)
Score = 137.79 FPS (Run 1)
Score = 138.74 FPS (Run 2)
Average score = 138.26 FPS
650-1688-1000
Score = 138.00 FPS (Run 1)
Score = 138.95 FPS (Run 2)
Average score = 138.47 FPS
676-1688-1000
Score = 135.98 FPS (Run 1)
Score = 136.79 FPS (Run 2)
Average score = 136.38 FPS
701-1752-950
Score = 136.05 FPS (Run 1)
Score = 136.85 FPS (Run 2)
Average score = 136.44 FPS
701-1752-1000
Score = 137.80 FPS (Run 1)
Score = 138.56 FPS (Run 2)
Average score = 138.18 FPS
750-1875-1000
Score = 136.03 FPS (Run 1)
Score = 136.86 FPS (Run 2)
Average score = 136.44 FPS
701-1770-1000
Score = 136.66 FPS (Run 1)
Score = 137.38 FPS (Run 2)
Average score = 137.02 FPS
650-1688-950 (default)
Score = 136.56 FPS (Run 1)
Score = 137.27 FPS (Run 2)
Average score = 136.91 FPS
Everything was overclocked with rivatuner 2.06. The numbers barely jump at all in frame rates. They even get worse when the gpu is really overclocked.. The gpu is watercooled and the board has ram chips... barely moves above 34c
Last edited by Eddie3dfx; 11-08-2007 at 06:46 PM.
Asus P6T, I7-920, 6gb ocz xmp, 4890, Raid 0-1 Terabyte, full watercooled - Triple Loop 5 radiators
I can verify that I scored better in 3d mark with 700/970/1728 than I did with 720/1000/1820.
Hate to break it to you, but that HSF is incomaptible with the 8800GT.
I think you'd be better looking at the latest revision of the HR-03, or the Zalman VF1000/ ZMRHS-88 combo.
It's great to see all these results. A good friend of mine has been looking after my 8800GT for me whilst i've been away. So im eagerly anticipating getting my paws on mine. I've got UT3 and Crysis and STALKER to try out too.
With regard to PiTHON earlier who got diminishing returns with an overclock of his memory above 1000mhz, is that due to the core running to slow or too fast for the memory? Out of rhythm with each other. Im sure the same thing happens with CPU/ RAM.
Of course i could be wrong. It's been known to happen, frequently.![]()
Last edited by skullfcuk; 11-08-2007 at 09:01 PM.
Currently running an ES Black Ops with a Qx9650 under SS, and a variety of Crossfire combos, and a Biostar Tpower i45 with an E8500 (air) and a variety of Crossfire combos. Both with 2x1gb of Ballistix (DDR2/3 PC2/3 8500) FSP 350w/ Galaxy DXX 1000w PSU's.
A64 X2 3800 LCBIE 0618 EPMW @ 2.92Ghz 1.41v
Asus A8N SLI SE
4*512Mb XMS PC3200 C2
Sapphire X800GTO˛ @ X850XT
WD 74GB Raptor
WD 500GB ABYS
BenQ 241WZ
Vista 32bit Ultimate
i believe i reahed the limit of the card unmodded...
http://service.futuremark.com/compare?3dm06=3698383
Q6600 @ 4102mhz - 8800GT @ 802/1998/1026
http://service.futuremark.com/compare?3dm05=3658249
![]()
[SIGPIC][/SIGPIC]
guys around what score should i be getting in vista 64 bit with a gt @740/1800/1000 and cpu @ 2.14 ghz.im getting 9500 but think i should be getting more ?
|Intel core duo E6420*lapped*@3600mhz|Custom watercooling |Asus Maximus Formula X38|nvidia 8800gt|4gb Crucial balltix pc 6400|Antec NeoHe 550w PSU|Seagate Barracude 300GB|Seagate Barracude 320GB|Lian Li Pc-A70b|plextor 810sa|
------------------------------------------------------
watercooling:|EK supream|Thermochill PA.360|DDc 3.2 18w/petra top|Ek 150 res|DD maze 4|Ek Ausu Nb|
Dunno about scores with that processor, but I got better scores when I backed the OC off a bit. I think it was artifacting though.
PLEASE HELP!?!?!?
What's wrong with my setup! From wha tI can tell, with my specs and the GT clocked to even 700/1000/1800 I should be getting over 13000 in 3D mark. I'm barely breaking 12k. Even though I run 3D mark at 1280x1024 could it make a difference that I have a 1920x1200 monitor?
WHat could be wrong?!?!?
Last edited by iadstudio; 11-09-2007 at 09:56 AM.
Bookmarks