E6850+Dimastech SS1HP:Only a warming up run!82.2k 3d'01 ecc

[dinos22]

that's a great cooler

if i had a better mix of gasses and load tuning i would probably have similar temps but i've tested a few CPUs and my E6850 easily benches 32M SuperPi at 4.9Ghz (FSB WALL) and E6750 easy 4850Mhz before it hits a FSB wall.....but i am trying to get some time and bench this E6750 past 600MHz FSB 3D....love the chip

so i guess what i'm saying is that your CPUs should be easily there too since you are about 10C cooler and similar sort of compressor and all heh

oh for reference i ran wPrime 1024M at 4840Mhz on E6750 with 1.69v and had -45C on evap around 20-21C ambient and my CPU core temp was at -14C

[nachthymnen]

tks guys
Bad news, fsbwall around 536/537 I think

2 fast up:

PiFast @ 4704Mhz=19.94


SPI 1M @ 4812Mhz=10.594

http://valid.x86-secret.com/show_oc.php?id=265341

Tomorrow some 3d marks

ADD 09/11:
Aquamark3=254.000 (Just a test)


3d Mark'05 @ 4632Mhz=26.214 (PCI @ 105mhz )

http://service.futuremark.com/compare?3dm05=3657435

3d Mark'01 @ 4632Mhz=84.498 (Bad GT1)

[nachthymnen]

2 fast test @ '03 and '06, vga with low freq.
18.5° room

3d'03 @ 4596mhz=53.652


3d'06 @ 4596Mhz=15.974


The thermomether sensor is not installed well but here is a shot during '06 with cpu @ 4596mhz at 1,72V and 19° room temp(phase warking from around an hour)

[nachthymnen]

Lost over 30 minutes only for run CL in 3d'01

3 little UP:

Aquamark3=255.746


3d'01=84992


3d'03=54124

http://service.futuremark.com/compare?2k3=5598121