Page 57 of 233 FirstFirst ... 7475455565758596067107157 ... LastLast
Results 1,401 to 1,425 of 5820

Thread: ASUS Maximus Formula SE

  1. #1401
    Xtreme Member
    Join Date
    Sep 2007
    Posts
    459
    muari, can you edit your sig to include what you have in your rig?

  2. #1402
    Registered User
    Join Date
    Mar 2006
    Posts
    15
    I have this ram 4x1 corsair dominator and it works great with this board.
    http://www.newegg.com/product/produc...82E16820145179

  3. #1403
    Xtreme Member
    Join Date
    Sep 2007
    Posts
    459
    my crucial run fine at 4 GB and cpu clocked to 3.8 Mhz.

  4. #1404
    Registered User
    Join Date
    Feb 2007
    Location
    Hungary
    Posts
    7
    Quote Originally Posted by Leeghoofd View Post
    mmm the Extreme Music and the extreme gamer run here fine on my rev 1.02G board with 0505 bios... (reverted back from 0602)

    you mean the board doesn't post ? or doesn't it get into windows ?

    @393 get the Maximus mate if you can do it like that...

    The board posts, but every time the win(xp) starts, I get a message that the system has found an unknown audio device... That should be the X-Fi.
    Mine is also 1.02G, I flashed into bios 0602 from the 04XX. I will try that 0505.
    Are you using the Sound Blaster with the "onboard" SupremeFX or as standalone? And in which PCI slot?

  5. #1405
    Xtreme Member
    Join Date
    Dec 2005
    Location
    Spencer, NY
    Posts
    404
    Quote Originally Posted by Leeghoofd View Post
    Well it stops for about 1-2mins minutes after formatting the harddrive but it did that too with the install of my P35 P5Dlx mobo, no I didn't use the S-ata drivers of the cd, just Windows XP with SP2 integrated... I don't think it took 45 minutes to install max 30-35 minutes or so... I'll time it next time as i'm currently still testing the board on the testbench, once I put it into the rig I'll format the C partition again... and keep you updated on the that matter...

    @393 : I'm currently running the dreaded Samsung HD's that seems to mess up the P5K premium a lot, no issues here mate...
    Update:

    Last night I did the "Make Disk" off the MB driver disk. I formatted and installed XP SP2 with those drivers. Hitting F6 then chosing the SATA Controller. There are four to chose from, a couple RAID ones, something about mobile and one that said something like SATA Controller Desktop. The install still seemed slower then my old NF3 w/ FX-60, but it was faster then before. And so far XP seems to be running fine. But I've had some other problems installing stuff. The ASUS InstALL had problems installing. And my G5failed the first time. Might be a issue, I'm not sure yet.
    ASUS Maximus Formula Special Edition / SE X38 RAMPAGE 0803 BIOS
    Q6700
    Lapped TRUE
    G.Skill 8500 2x2GB
    9600DT 512MB
    X-Fi Extreme Music.
    Samsung 1TB & 2 WD 200GB (trying to RAID)
    PC Power & Cooling 750 (Black)

  6. #1406
    Xtreme Guru
    Join Date
    Aug 2005
    Location
    Burbank, CA
    Posts
    3,766
    Quote Originally Posted by cuke2u View Post
    Hi again, well those sockets test fine as well with only two memory sticks in place, looks like this motherboard doesn't like 4 x 1gbs.
    Anyone recommend some 2 x 2gb memory modules?
    ChrisC
    http://www.newegg.com/Product/Produc...82E16820231145

  7. #1407
    Registered User
    Join Date
    Feb 2007
    Location
    Hungary
    Posts
    7
    After xp reinstall, same happened, X-Fi don't wan't to work
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	X-Fi.jpg 
Views:	683 
Size:	69.6 KB 
ID:	66768  
    ASUS Maximus Formula SE watercooled ~
    E6750 ~
    2Gb/1000MHz OCZ Ti Alpha VX2 ~
    Sapphire X1950XT ~
    Corsair HX520W ~
    Innovatek/NexXxoS watercooling ~
    X-Fi Fatal1ty Pro FPS ~
    Chieftec DA01SLD Xab-o-Matic Yetimod ~

  8. #1408
    Xtreme Addict
    Join Date
    Jan 2003
    Location
    Canterbury, UK
    Posts
    1,102
    Remounting my TRUE made a world of difference to my temps!!! I knocked nearly 7*c off loaded temps just by doing this, and also lowered northbridge temps (I assume there was a deadspot...?)!



    And now it's mounted like this...



    | Asus nVidia 580 GTX @ 850MHz |
    | Windows 7 x64 Ultimate | Mac OS X 10.6.8 | Mac OS X 10.7.2 |
    | Intel Core i7 970 @ 4.2GHz | Gigabyte X58A-UD9 | 12GB Corsair 2000MHz 8-8-8-24 |
    | HTC HD2 | MIUI 1.10.21 | Android 2.3.7 | TyTung 12.4 Kernel |



    New Builds Coming Soon..

  9. #1409
    Xtreme Member
    Join Date
    Oct 2006
    Posts
    191
    Hi, thanks GAR, unfortunately I'm in the UK but is this http://www.memoryc.com/products/desc...kit/index.html the same or similar?
    Chris
    Asus Maximus Formula SE
    Intel Q6600 'GO' @ 3.6ghz
    Thermochill PA120-3 Radiator
    Swiftech MCRES-Micro Watercooling Resevoir
    Swiftech MCP655 Pump
    Swiftech MCW60R VGA Waterblock
    D-Tec Fuzion CPU Block
    Vista Ultimate
    4x1GB Ballistix PC2-8500 memory modules
    2x Samsung 320gbs SATA II
    Pioneer DVR-111D DVDRW
    2 x ATI HD4870
    Dell 2407WFP 24" Widescreen LCD
    Lian Li A71A case
    Thermaltake Toughpower 850W

  10. #1410
    Xtreme Cruncher
    Join Date
    Nov 2006
    Location
    Minnesota
    Posts
    841
    @ weescott

    To think I was 2 minutes away from attempting to take off the heatpipe from my board.

    I am really glad I didn't now!
    If you take your time the NB comes off rather easily, just don't pull. I took a flat head screw driver and just slowly worked the corners and it came off w/o any problems. It was definetly worth the lower temps.

    @scope666
    Probably just growing pains, it's a VERY new chipset, and the BIOS is in its infant stages. It will probably take awhile before this thing starts to shine. My old P5b Deluxe was like that when it first came out, then it became a rock.
    Other than PCI-E 2.0 and better support for 45nm and DDR3, how is this a new chipset?
    Didn't Intel design the X38 specifically for DDR3? Didn't ASUS and other MoBo manufacturers have to force DDR2 support on the chipset? I'm wondering if all are problems are just due to poor optimization of DDR2 that can't be fixed outside of loose timmings.
    Last edited by TouGe; 11-04-2007 at 11:59 AM.
    QX 9650 | Maximus II Formula | G.SKILL 4GB (2 x 2GB) PC2 8500 | Sapphire 4850 X2 2GB| Auzen X-Fi Prelude 7.1 | 3x's WD 150GB Raptors & 2x's 1TB Seagate 7200.11 | Silverstone OP1200 | SilverStone TJ07 | Dell 2707WFP

    EK-RES 250 --> Swiftech MCP655 --> Apogee GTZ --> Enzotech Sapphire NB --> Feser X-Changer 360


  11. #1411
    I am Xtreme
    Join Date
    Sep 2006
    Posts
    10,374
    Quote Originally Posted by X@b3e View Post
    Hi there!
    I got my mobo on wednesday, and have a problem with an X-Fi Fatal1ty Pro audio card, that doesn't work with the Maximus. I tried to run with the Supreme FX, after that I disabled it, but nothing happened with the X-Fi. The card is in the lower PCI slot, can't fit to the upper because of the VGA waterblock. Anyone has issues with X-Fi, or am I the only one lucky guy?
    looking at ya picture you seem to have another version of the driver I use, I just looked at creative webbie and it's the same driver for all the cards

    http://be-en.europe.creative.com/support/downloads/download2.asp?MainCategory=209&Product=14000&dlcen tric=9756&Product_Name=X%2DFi+Fatal1ty&filetype=1& OSName=Windows+XP

    click on I agree and the download should start

    hope this link works otherwise meet me on messenger and I'll send it to ya ( pm me first then plz)
    Last edited by Leeghoofd; 11-04-2007 at 12:09 PM.
    Question : Why do some overclockers switch into d*ckmode when money is involved

    Remark : They call me Pro Asus Saaya yupp, I agree

  12. #1412
    Xtreme Member
    Join Date
    Oct 2006
    Posts
    191
    Quote Originally Posted by cuke2u View Post
    Hi, thanks GAR, unfortunately I'm in the UK but is this http://www.memoryc.com/products/desc...kit/index.html the same or similar?
    Chris
    'S ok GAR, I've checked the part numbers and they're both the same...
    ChrisC
    Asus Maximus Formula SE
    Intel Q6600 'GO' @ 3.6ghz
    Thermochill PA120-3 Radiator
    Swiftech MCRES-Micro Watercooling Resevoir
    Swiftech MCP655 Pump
    Swiftech MCW60R VGA Waterblock
    D-Tec Fuzion CPU Block
    Vista Ultimate
    4x1GB Ballistix PC2-8500 memory modules
    2x Samsung 320gbs SATA II
    Pioneer DVR-111D DVDRW
    2 x ATI HD4870
    Dell 2407WFP 24" Widescreen LCD
    Lian Li A71A case
    Thermaltake Toughpower 850W

  13. #1413
    Registered User
    Join Date
    Feb 2007
    Location
    Hungary
    Posts
    7
    Quote Originally Posted by Leeghoofd View Post
    looking at ya picture you seem to have another version of the driver I use, I just looked at creative webbie and it's the same driver for all the cards

    http://be-en.europe.creative.com/support/downloads/download2.asp?MainCategory=209&Product=14000&dlcen tric=9756&Product_Name=X%2DFi+Fatal1ty&filetype=1& OSName=Windows+XP

    click on I agree and the download should start

    hope this link works otherwise meet me on messenger and I'll send it to ya ( pm me first then plz)
    Thanx for Your answer. I tried that with the driver You linked me, deinstalled before all creative drivers. After that I installed that driver, perfectly done, restarted my rig, but next time when the win started, I got that "unknown audio device found" message again
    I have already seen such like that the device can't answer. This makes me think, that there might be a conflict with an other device. I read in the mobo's manual, that PCI slot shares with LAN, SATA, PCIe X16 etc. In which PCI port do you use yours?
    The first time I installed the parts, the card worked, but the creative applications weren't installed. I tried to install them, and since then I can't hear any noise

    Quote Originally Posted by DerekFSE View Post
    I knew my post would get overlooked.

    Turn the Supreme FX back on, I bet your X-Fi will work. Although my mic has tons of noise so I use the FX one.

    edit - I see its a different issue, but the noise I got once the drivers were installed could just be a different symptom of the same problem.
    Thy for your answer too, I would like to use both of the soundcards, one of them with surround headset and the other with 5.1 speaker system. I will behappy, if I had "only" noisy mic. I don't get any sound from the X-Fi
    Last edited by X@b3e; 11-04-2007 at 01:28 PM.
    ASUS Maximus Formula SE watercooled ~
    E6750 ~
    2Gb/1000MHz OCZ Ti Alpha VX2 ~
    Sapphire X1950XT ~
    Corsair HX520W ~
    Innovatek/NexXxoS watercooling ~
    X-Fi Fatal1ty Pro FPS ~
    Chieftec DA01SLD Xab-o-Matic Yetimod ~

  14. #1414
    I am Xtreme
    Join Date
    Sep 2006
    Posts
    10,374
    I think you are looking for trouble there Xabre ... and like in the PM I posted ya the extra apps prolly corrupted ya install, install winXP from scratch !!
    Question : Why do some overclockers switch into d*ckmode when money is involved

    Remark : They call me Pro Asus Saaya yupp, I agree

  15. #1415
    Xtreme Guru
    Join Date
    Aug 2005
    Location
    Burbank, CA
    Posts
    3,766
    OK, so after installing my 8800GT, i have been getting nothing but BSOD's............i have used the diag. tool it says its driver related....anyone else getting issues with vista 64???? here is what the bsod says

    process has locked pages

    when i get back into windows this is the description it gives me

    Problem signature:
    Problem Event Name: BlueScreen
    OS Version: 6.0.6000.2.0.0.256.1
    Locale ID: 1033

    Additional information about the problem:
    BCCode: 76
    BCP1: 0000000000000000
    BCP2: FFFFFA800541C040
    BCP3: 000000000000F6E8
    BCP4: 0000000000000000
    OS Version: 6_0_6000
    Service Pack: 0_0
    Product: 256_1

    Files that help describe the problem:
    C:\Windows\Minidump\Mini110307-01.dmp
    C:\Users\GAR\AppData\Local\Temp\WER-47330-0.sysdata.xml
    C:\Users\GAR\AppData\Local\Temp\WERDA28.tmp.versio n.txt

  16. #1416
    Xtreme Enthusiast
    Join Date
    Dec 2005
    Location
    NYC
    Posts
    937
    @gar

    try changing your pci-e frequency
    i5 2500k @ 4.6ghz 1.335v [ASUS P8Z68 Deluxe]
    8gb gskill ripjaws f3-12800cl8-8gbxm
    600gb velociraptor + 1TB black
    MSI N560GTX-TI Twin Frozr II + x-fi xtrememusic
    corsair hx-620w + lian li pc201b + dell 2408fpw
    d-tek fuzion1/ddc2 + petra top/thermochill pa120.3

  17. #1417
    Xtreme Guru
    Join Date
    Aug 2005
    Location
    Burbank, CA
    Posts
    3,766
    Quote Originally Posted by Aldy402 View Post
    @gar

    try changing your pci-e frequency
    Its at 110 right now, should i put it back to 100???? or take it higher?

  18. #1418
    Xtreme Guru
    Join Date
    Aug 2003
    Location
    Athens, Greece
    Posts
    3,656
    Quote Originally Posted by X@b3e View Post
    Thanx for Your answer. I tried that with the driver You linked me, deinstalled before all creative drivers. After that I installed that driver, perfectly done, restarted my rig, but next time when the win started, I got that "unknown audio device found" message again
    I have already seen such like that the device can't answer. This makes me think, that there might be a conflict with an other device. I read in the mobo's manual, that PCI slot shares with LAN, SATA, PCIe X16 etc. In which PCI port do you use yours?
    The first time I installed the parts, the card worked, but the creative applications weren't installed. I tried to install them, and since then I can't hear any noise
    I've seen another person (earlier in this thread) having a prob with an X-Fi. His problem was different than yours though. His Maximus couldn't boot with an X-Fi on the last pci slot. Maybe the two probs are connected.
    In my opinion try another vga card (without a wb) so as to install X-Fi in 1st slot.
    Project ZEUS II

    Asus Rampage II Extreme
    Intel I7 920 D0 3930A @ 4.50GHz (21 X 214mhz)
    3 x 2GB G.Skill Trident 1600 @ 1716MHz (6-8-6-20-1N)
    2 x Asus HD 6870 CrossFire @ 1000/1100MHz
    OCZ Vertex 2 60GB | Intel X25-M 120GB | WD Velociraptor 150GB | Seagate FreeAgent XTreme 1.5TB esata
    Asus Xonar DX | Logitech Z-5500 | LG W2600HP 26" S-IPS LCD

    Watercooling setup:
    1st loop -> Radiator: 2 x ThermoChill PA120.3 | Pump: Laing DDC-3.25 with Alphacool HF 38 top | CPU: Swiftech Apogee XT | Chipset: Swiftech MCW-NBMAX | Tubing: Masterkleer 1/2" UV
    2nd loop -> Radiator: ThermoChill PA120.3 | Pump: Laing DDC-3.2 with Alphacool HF 38 top | GPU: 2 x EK FC-6870 | Tubing: Masterkleer 1/2" UV


    Assembled in Mountain Mods Ascension Trinity
    Powered by Corsair Professional Series Gold AX1200

  19. #1419
    Xtreme Guru
    Join Date
    Aug 2005
    Location
    Burbank, CA
    Posts
    3,766
    Quote Originally Posted by cuke2u View Post
    Hi, thanks GAR, unfortunately I'm in the UK but is this http://www.memoryc.com/products/desc...kit/index.html the same or similar?
    Chris
    Its the same bro.

  20. #1420
    Xtreme Guru
    Join Date
    Aug 2005
    Location
    Burbank, CA
    Posts
    3,766
    OK, so the BSOD happens mainly when i exit a game, and when i try to restart my computer..................Process_Has_locked_pages ...........i tried upping the pci-e mhz and nothing happened, i tried it on 100 and i still get the bsod...........this is crazy im starting to think i have a bad card maybe????? everytime i try to restart i get a bsod.....overclocked or stock, same thing.

  21. #1421
    Xtreme Guru
    Join Date
    Aug 2005
    Location
    Burbank, CA
    Posts
    3,766
    seems like i have a defective card, im just going to frys to return it........will report back, probably will get the xfx card tommorow to test out.

  22. #1422
    Xtreme Member
    Join Date
    Sep 2007
    Posts
    459
    well, a fresh GFX card will definately rule out a glitch, etc. with the MB.

  23. #1423
    Registered User
    Join Date
    Oct 2007
    Posts
    85
    Quote Originally Posted by kup View Post
    Remounting my TRUE made a world of difference to my temps!!! I knocked nearly 7*c off loaded temps just by doing this, and also lowered northbridge temps (I assume there was a deadspot...?)!



    And now it's mounted like this...

    Cool, same way I'm setting up my case.

    Got a question: For the rear fan, do you have it blowing in or out?
    I assume the top fan is blowing out.

  24. #1424
    Xtreme Addict
    Join Date
    Jan 2003
    Location
    Canterbury, UK
    Posts
    1,102
    Rear fan is extract. Top most fan (200mm) is extract above TRUE. Bottom mounted fan on TRUE is pushing through the TRUE and the top mounted fan on the TRUE is pulling the air through and pushing it out the 200mm extract!

    It works well...


    | Asus nVidia 580 GTX @ 850MHz |
    | Windows 7 x64 Ultimate | Mac OS X 10.6.8 | Mac OS X 10.7.2 |
    | Intel Core i7 970 @ 4.2GHz | Gigabyte X58A-UD9 | 12GB Corsair 2000MHz 8-8-8-24 |
    | HTC HD2 | MIUI 1.10.21 | Android 2.3.7 | TyTung 12.4 Kernel |



    New Builds Coming Soon..

  25. #1425
    Xtreme Member
    Join Date
    Apr 2005
    Posts
    104
    0701 bios seems to have been released on the FTP check it out! Anyone wanna test it?
    ftp://ftp.asus.com.tw/pub/ASUS/mb/so...ximus_Formula/

Page 57 of 233 FirstFirst ... 7475455565758596067107157 ... LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •