I think HR-03 rev.A [not plus] could fit on 8800gt

[SaII]

http://www.hardwarecanucks.com/forum...on-review.html

the 8600GTS stock cooler installed perfectly on an 8800GT. The small dab of thermal compound I applied spread pretty evenly with the pressure applied with the stock 8600GTS heatsink. Therefore, I am reasonably sure that any cooler which is compatible with the 8600-series will also be compatible with the 8800GT.

http://www.thermalright.com/a_page/m...t_hr03_MCL.htm


if you have an 8800gt, you should measure for those dimensions

[elpibe10]

I have the Gigabyte 8800GT and the diagonal distance between the 2 mounting holes is indeed 75.2

My only concern is whether the smaller contact surface of the HR-03 Rev A. is sufficient to cover the entire GPU.

[Vapor]

I have the Gigabyte 8800GT and the diagonal distance between the 2 mounting holes is indeed 75.2

My only concern is whether the smaller contact surface of the HR-03 Rev A. is sufficient to cover the entire GPU.

Before the HR-03+ came out, people were jerryrigging standard HR-03's onto G80s and they worked decently well (much better than stock, but high loads didnt do so well). G92 is much smaller, so it should work

[metro.cl]

It does, here are the pics:

[Vapor]

Is that yours Felipe? How are the temps?

[metro.cl]

Is that yours Felipe? How are the temps?

yep mine, temps at idle 34ºC load around 52ºC with 745-1890-2080 clocks (core -shader-vram).

[zanzabar]

what was it befor u put the hr03 on there

[metro.cl]

what was it befor u put the hr03 on there

at idle around 45ºC didnt measure load

[Start]

Is it just me or does the card look a little bowed?

[metro.cl]

Is it just me or does the card look a little bowed?

the cooler always bows the cards

[Vapor]

Impressive....~$300 gets you a cool running 745-1890-2080....more than enough to beat an Ultra on non-30" monitors....I like

Thanks for sharing

[LuckyNV]

Metro did you not put extra sinks on the VRM?

[Frag_Lord]

Metro did you not put extra sinks on the VRM?

Yeah im also curious of this....what other heatsinks am i going to need if I buy a HR-03 for my 8800GT?

[metro.cl]

Metro did you not put extra sinks on the VRM?

nope

the Thermal pads are horrible as always so naked with just a fan blowing for me is better.

[Morais]

Cool, good to know it fits
Thx

[MichelinGuy]

My TR HR-03 R600's bracket didn't fit... but I got it to fit with a little bit of drilling.

Idle: 40-45 degrees C
Load: 62 degrees C max

@ Load I was playing Day of Defeat: Source for 15 minutes. Does anybody know how to stress it really good? And are these good temps?
I'm going to play Bioshock right now, I hope it stays 62 max...

Thanks in advance

[metro.cl]

My TR HR-03 R600's bracket didn't fit... but I got it to fit with a little bit of drilling.

Idle: 40-45 degrees C
Load: 62 degrees C max

@ Load I was playing Day of Defeat: Source for 15 minutes. Does anybody know how to stress it really good? And are these good temps?
I'm going to play Bioshock right now, I hope it stays 62 max...

Thanks in advance

Best stress tool comes with Ati tool, use scan for artifacts or show 3D.

[overclockah]

How does the HR-03 compare with the VF1000?

[SaII]

How does the HR-03 compare with the VF1000?

HR-03 beats vf1k

do not think that everything zalman makes is better, they are pretty but they aren't good