Quote Originally Posted by Daytime Dreamer View Post
Hi there.

I have had my Abit IP35-pro for about a month now with an Ubuntu 7.10 setup and sometimes programs suddenly close (firefox in particular) and today I had a hard lock (freeze) on the system. Here are the specs

Mobo : Abit IP35-Pro with bios 11
Cpu core voltage Bios : 1.4850 gives 1.45 reading in the voltage monitoring. Is this correct or is it way off?
DDR2 Voltage = 2.150 (Running 4X1gb Crucial Ballistix 6400 sticks)
CPU VTT 1.2V = 1.23
MCH 1.25V = 1.37
ICH 1.05V = 1.09
ICHIO 1.5v = 1.55V

Memory timmings are : 5-5-5-12, auto, auto, auto, auto, auto, 1T, V.1.0a, Disabled, PCI Slot

All "Cpu features" are disabled

The cpu is a c2d 6300 running at 500X7. Memtest runs fine for 24 hours with no errors and i have tested with cpu burn-in program from ubuntu for at least 3 hours and had running also some high definition movies.

Cooling is done by a TR Ultra 120 lapped. The c2d6300 is also lapped. Idle temps in bios are 38-39 celcius

System runs on a hyper typer-R 580watt and a Fortron 300w only for the GPU (8800gts)

Anyone got any recommendations as to what could be the fault here?

Thanks for any replies

P.S : Ace, glad to see you again in the forums
Hi "DD"!...glad to see you again...AND...very glad to see that you have the Pro board...you made a great pick!

as for your problem, i would recommend raising your MCH to about 1.48 since you are using four sticks of memory.

the other two voltages to raise are your CU VTT to 1.35 and your ICHIO 1.5 to around 1.65.

you need to be aware that this board has given users some headaches when using four sticks of memory...other boards do the same.