Q6600 Overclocking Database.

[jmmtn4aj]

What were you able to oc the Q6600 to with air cooling for a semi low temp.

I've got my Q6600 @ 1.44-1.45 (can't remember what I set it to and no program can read the vcore right) at 400x9 and around 66 deg C at load (warmest core). S-Flex on the Ultra-120 eXtreme is spinning at ~1000-1100rpm. Didn't lap anything, using the provided TIM, and didn't even do the coin mod for the Ultra-120 (mine doesn't come with the plastic washer)

[Moe_Szyslak]

I've got my Q6600 @ 1.44-1.45 (can't remember what I set it to and no program can read the vcore right) at 400x9 and around 66 deg C at load (warmest core). S-Flex on the Ultra-120 eXtreme is spinning at ~1000-1100rpm. Didn't lap anything, using the provided TIM, and didn't even do the coin mod for the Ultra-120 (mine doesn't come with the plastic washer)

B3 or G0?

[jmmtn4aj]

B3 or G0?

G0. I think 66 deg c would be a bit miraculous for an unlapped B3 :p

[Moe_Szyslak]

G0. I think 66 deg c would be a bit miraculous for an unlapped B3 :p

A man can dream, right?

[jmmtn4aj]

Meh, I bumped the voltage up to ~1.472 trying to get this OCCT stable. Still won't do it but I'm not bumping it up any more since temps are near unstable range (~71), at 68-69 in the warmest core right now. It's stable folding a few WUs with and without the room's AC unit though, so I'll leave it till I get around to tightening the HSF (even out the thermal load) and changing the TIM. If that isn't enough, guess I'll lap the HSF, CPU, or both