Post your X2 revision F3 OC and stepping

[Neverine]

Let me add some more results.

24/7 - 3.1 GHz / 1.4V (set in BIOS)


I can stabilize it @ 3.2 GHz, but had to run my Zal at higher rpm.


Super Pi 1MB



wPrime 32M



Mandelbrot



CPU-Z Validation

My memory is crappy, so the results aren't pretty good - 2*1 GB @ ~ 800 4-4-4-12 2T.
The stepping is : CCB6F 0715 TPWM.
Couldn't find a CCB8F in Bulgaria, but I happy with this one anyway.

[Lightman]

Very good result Neverine !

My previous X2 was also CCB6F and it clocked virtually same as yours. It could boot up to 3.3GHz but stability was good only below 3.2GHz.

[Neverine]

Very good result Neverine !

Thanks
When I have some more time I'll try to squeeze some more MHz, but it seems the 8Fs are 'a lil' better...

btw I had some troubles running a CellShock DDR2 800 CL4(GMH based) on the system - it wouldn't post @ 1080 5-5-5-15 2.4V, despite the fact it was pretty stable @ 1066 4-4-4-12 2.4V and 1066 5-5-5-15 2.2-2.3V. A friend of mine also had problems running a D9 based SuperT on X2 3800+. Is the IMC working properly with D9 chips and if not - can you recomend me some RAM ?

[Lightman]

Thanks
When I have some more time I'll try to squeeze some more MHz, but it seems the 8Fs are 'a lil' better...

btw I had some troubles running a CellShock DDR2 800 CL4(GMH based) on the system - it wouldn't post @ 1080 5-5-5-15 2.4V, despite the fact it was pretty stable @ 1066 4-4-4-12 2.4V and 1066 5-5-5-15 2.2-2.3V. A friend of mine also had problems running a D9 based SuperT on X2 3800+. Is the IMC working properly with D9 chips and if not - can you recomend me some RAM ?

I can't push my Crucials past 1020MHz@ 4-4-4-12-15, so it looks like IMC limitation more than anything else....

Don't really know any particular brand which clocks better on AM2 but some are using Transcend for high clock.